/usr/share/augeas/lenses/dist/tests
Edit: /usr/share/augeas/lenses/dist/tests/test_dhcpd.aug (15429B)
module Test_dhcpd =
let lns = Dhcpd.lns
let conf = "#
# Sample configuration file for ISC dhcpd for Debian
#
# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as
# configuration file instead of this file.
#
# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $
#
# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages ('none', since DHCP v2 didn't
# have support for DDNS.)
ddns-update-style none;
# option definitions common to all supported networks...
option domain-name \"example.org\";
option domain-name-servers ns1.example.org, ns2.example.org;
default-lease-time 600;
max-lease-time 7200;
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
authoritative;
allow booting;
allow bootp;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;
# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.
subnet 10.152.187.0 netmask 255.255.255.0 {
}
# This is a very basic subnet declaration.
subnet 10.254.239.0 netmask 255.255.255.224 {
range 10.254.239.10 10.254.239.20;
option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
}
# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.
subnet 10.254.239.32 netmask 255.255.255.224 {
range dynamic-bootp 10.254.239.40 10.254.239.60;
option broadcast-address 10.254.239.31;
option routers rtr-239-32-1.example.org;
}
# A slightly different configuration for an internal subnet.
subnet 10.5.5.0 netmask 255.255.255.224 {
range 10.5.5.26 10.5.5.30;
option domain-name-servers ns1.internal.example.org;
option domain-name \"internal.example.org\";
option routers 10.5.5.1;
option broadcast-address 10.5.5.31;
default-lease-time 600;
max-lease-time 7200;
}
# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.
host passacaglia {
hardware ethernet 0:0:c0:5d:bd:95;
filename \"vmunix.passacaglia\";
server-name \"toccata.fugue.com\";
}
# Fixed IP addresses can also be specified for hosts. These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP. Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
host fantasia {
hardware ethernet 08:00:07:26:c0:a5;
fixed-address fantasia.fugue.com;
}
# You can declare a class of clients and then do address allocation
# based on that. The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.
#class \"foo\" {
# match if substring (option vendor-class-identifier, 0, 4) = \"SUNW\";
#}
shared-network 224-29 {
subnet 10.17.224.0 netmask 255.255.255.0 {
option routers rtr-224.example.org;
}
subnet 10.0.29.0 netmask 255.255.255.0 {
option routers rtr-29.example.org;
}
pool {
allow members of \"foo\";
range 10.17.224.10 10.17.224.250;
}
pool {
deny members of \"foo\";
range 10.0.29.10 10.0.29.230;
}
}
"
test lns get "authoritative;" = { "authoritative" }
test lns get "ddns-update-style none;" = { "ddns-update-style" = "none" }
test lns get "option domain-name \"example.org\";" =
{ "option"
{ "domain-name"
{ "arg" = "example.org" }
}
}
test lns get "option domain-name-servers ns1.example.org, ns2.example.org;" =
{ "option"
{ "domain-name-servers"
{ "arg" = "ns1.example.org" }
{ "arg" = "ns2.example.org" }
}
}
test lns get "default-lease-time 600;" = { "default-lease-time" = "600" }
test lns get "range 10.254.239.60;" =
{ "range"
{ "to" = "10.254.239.60" }
}
test lns get "range dynamic-bootp 10.254.239.60;" =
{ "range"
{ "flag" = "dynamic-bootp" }
{ "to" = "10.254.239.60" }
}
test lns get "range dynamic-bootp 10.254.239.40 10.254.239.60;" =
{ "range"
{ "flag" = "dynamic-bootp" }
{ "from" = "10.254.239.40" }
{ "to" = "10.254.239.60" }
}
test lns get "subnet 10.152.187.0 netmask 255.255.255.0 {}\n" =
{ "subnet"
{ "network" = "10.152.187.0" }
{ "netmask" = "255.255.255.0" }
}
test lns get " pool {
pool {
}
}
" =
{ "pool"
{ "pool" }
}
test lns get "group { host some-host {hardware ethernet 00:00:aa:bb:cc:dd;
fixed-address 10.1.1.1;}}" =
{ "group"
{ "host" = "some-host"
{ "hardware"
{ "type" = "ethernet" }
{ "address" = "00:00:aa:bb:cc:dd" }
}
{ "fixed-address" = "10.1.1.1" }
}
}
test lns get "group fan-tas_tic { }" =
{ "group" = "fan-tas_tic" }
test Dhcpd.stmt_secu get "allow members of \"foo\";" = { "allow-members-of" = "foo" }
test Dhcpd.stmt_secu get "allow booting;" = { "allow" = "booting" }
test Dhcpd.stmt_secu get "allow bootp;" = { "allow" = "bootp" }
test Dhcpd.stmt_option get "option voip-boot-server code 66 = string;" =
{ "rfc-code"
{ "label" = "voip-boot-server" }
{ "code" = "66" }
{ "type" = "string" }
}
test Dhcpd.stmt_option get "option special-option code 25 = array of string;" =
{ "rfc-code"
{ "label" = "special-option" }
{ "code" = "25" }
{ "type" = "array of string" }
}
test Dhcpd.stmt_option get "option special-option code 25 = integer 32;" =
{ "rfc-code"
{ "label" = "special-option" }
{ "code" = "25" }
{ "type" = "integer 32" }
}
test Dhcpd.stmt_option get "option special-option code 25 = array of integer 32;" =
{ "rfc-code"
{ "label" = "special-option" }
{ "code" = "25" }
{ "type" = "array of integer 32" }
}
test Dhcpd.lns get "authoritative;
log-facility local7;
ddns-update-style none;
default-lease-time 21600;
max-lease-time 43200;
# Additional options for VOIP
option voip-boot-server code 66 = string;
option voip-vlan-id code 128 = string;
" =
{ "authoritative" }
{ "log-facility" = "local7" }
{ "ddns-update-style" = "none" }
{ "default-lease-time" = "21600" }
{ "max-lease-time" = "43200"
{ "#comment" = "Additional options for VOIP" }
}
{ "rfc-code"
{ "label" = "voip-boot-server" }
{ "code" = "66" }
{ "type" = "string" }
}
{ "rfc-code"
{ "label" = "voip-vlan-id" }
{ "code" = "128" }
{ "type" = "string" }
}
test Dhcpd.lns get "
option domain-name-servers 10.1.1.1, 10.11.2.1, 10.1.3.1;
next-server 10.1.1.1;
failover peer \"redondance01\" {
primary;
address 10.1.1.1;
port 647;
peer address 10.1.1.1;
peer port 647;
max-response-delay 20;
max-unacked-updates 10;
mclt 3600; #comment.
split 128; #comment.
load balance max seconds 3;
}
" =
{ }
{ "option"
{ "domain-name-servers"
{ "arg" = "10.1.1.1" }
{ "arg" = "10.11.2.1" }
{ "arg" = "10.1.3.1" }
}
}
{ "next-server" = "10.1.1.1" }
{ "failover peer" = "redondance01"
{ "primary" }
{ "address" = "10.1.1.1" }
{ "port" = "647" }
{ "peer address" = "10.1.1.1" }
{ "peer port" = "647" }
{ "max-response-delay" = "20" }
{ "max-unacked-updates" = "10" }
{ "mclt" = "3600"
{ "#comment" = "comment." }
}
{ "split" = "128"
{ "#comment" = "comment." }
}
{ "load balance max seconds" = "3" }
}
(* test get and put for record types *)
let record_test = "option test_records code 123 = { string, ip-address, integer 32, ip6-address, domain-list };"
test Dhcpd.lns get record_test =
{ "rfc-code"
{ "label" = "test_records" }
{ "code" = "123" }
{ "record"
{ "1" = "string" }
{ "2" = "ip-address" }
{ "3" = "integer 32" }
{ "4" = "ip6-address" }
{ "5" = "domain-list" }
}
}
test Dhcpd.lns put record_test after set "/rfc-code[1]/code" "124" =
"option test_records code 124 = { string, ip-address, integer 32, ip6-address, domain-list };"
test Dhcpd.lns get "
option CallManager code 150 = ip-address;
option slp-directory-agent true 10.1.1.1, 10.2.2.2;
option slp-service-scope true \"SLP-GLOBAL\";
option nds-context \"EXAMPLE\";
option nds-tree-name \"EXAMPLE\";
" =
{ }
{ "rfc-code"
{ "label" = "CallManager" }
{ "code" = "150" }
{ "type" = "ip-address" }
}
{ "option"
{ "slp-directory-agent" = "true"
{ "arg" = "10.1.1.1" }
{ "arg" = "10.2.2.2" }
}
}
{ "option"
{ "slp-service-scope" = "true"
{ "arg" = "SLP-GLOBAL" }
}
}
{ "option"
{ "nds-context"
{ "arg" = "EXAMPLE" }
}
}
{ "option"
{ "nds-tree-name"
{ "arg" = "EXAMPLE" }
}
}
test Dhcpd.lns get "option voip-vlan-id \"VLAN=1234;\";" =
{ "option"
{ "voip-vlan-id"
{ "arg" = "VLAN=1234;" }
}
}
test Dhcpd.lns get "option domain-name \"x.example.com y.example.com z.example.com\";" =
{ "option"
{ "domain-name"
{ "arg" = "x.example.com y.example.com z.example.com" }
}
}
test Dhcpd.lns get "include \"/etc/dhcpd.master\";" =
{ "include" = "/etc/dhcpd.master" }
test Dhcpd.lns put "\n" after set "/include" "/etc/dhcpd.master" =
"\ninclude \"/etc/dhcpd.master\";\n"
test Dhcpd.fct_args get "(option dhcp-client-identifier, 1, 3)" =
{ "args"
{ "arg" = "option dhcp-client-identifier" }
{ "arg" = "1" }
{ "arg" = "3" }
}
test Dhcpd.stmt_match get "match if substring (option dhcp-client-identifier, 1, 3) = \"RAS\";" =
{ "match"
{ "function" = "substring"
{ "args"
{ "arg" = "option dhcp-client-identifier" }
{ "arg" = "1" }
{ "arg" = "3" }
}
}
{ "value" = "RAS" }
}
test Dhcpd.stmt_match get "match if suffix (option dhcp-client-identifier, 4) = \"RAS\";" =
{ "match"
{ "function" = "suffix"
{ "args"
{ "arg" = "option dhcp-client-identifier" }
{ "arg" = "4" }
}
}
{ "value" = "RAS" }
}
test Dhcpd.stmt_match get "match if option vendor-class-identifier=\"RAS\";" =
{ "match"
{ "option" = "vendor-class-identifier"
{ "value" = "RAS" }
}
}
test Dhcpd.lns get "match pick-first-value (option dhcp-client-identifier, hardware);" =
{ "match"
{ "function" = "pick-first-value"
{ "args"
{ "arg" = "option dhcp-client-identifier" }
{ "arg" = "hardware" }
}
}
}
test Dhcpd.fct_args get "(16, 32, \"\", substring(hardware, 0, 4))" =
{ "args"
{ "arg" = "16" }
{ "arg" = "32" }
{ "arg" = "\"\"" }
{ "arg" = "substring(hardware, 0, 4)" }
}
test Dhcpd.stmt_match get "match if binary-to-ascii(16, 32, \"\", substring(hardware, 0, 4)) = \"1525400\";" =
{ "match"
{ "function" = "binary-to-ascii"
{ "args"
{ "arg" = "16" }
{ "arg" = "32" }
{ "arg" = "\"\"" }
{ "arg" = "substring(hardware, 0, 4)" }
}
}
{ "value" = "1525400" }
}
test Dhcpd.lns get "subclass allocation-class-1 1:8:0:2b:4c:39:ad;" =
{ "subclass"
{ "name" = "allocation-class-1" }
{ "value" = "1:8:0:2b:4c:39:ad" }
}
test Dhcpd.lns get "subclass \"allocation-class-1\" 1:8:0:2b:4c:39:ad;" =
{ "subclass"
{ "name" = "allocation-class-1" }
{ "value" = "1:8:0:2b:4c:39:ad" }
}
test Dhcpd.lns get "subclass \"quoted class\" \"quoted value\";" =
{ "subclass"
{ "name" = "quoted class" }
{ "value" = "quoted value" }
}
(* overall test *)
test Dhcpd.lns put conf after rm "/x" = conf
(* bug #293: primary should support argument *)
let input293 = "zone EXAMPLE.ORG. {
primary 127.0.0.1;
}"
test Dhcpd.lns get input293 =
{ "zone" = "EXAMPLE.ORG."
{ "primary" = "127.0.0.1" }
}
(* bug #311: filename should be quoted *)
let input311 = "subnet 172.16.0.0 netmask 255.255.255.0 {
filename \"pxelinux.0\";
}"
test Dhcpd.lns put "subnet 172.16.0.0 netmask 255.255.255.0 {
}" after
set "subnet/filename" "pxelinux.0" = input311
(* GH issue #34: support conditional structures *)
let gh34_empty = "if exists dhcp-parameter-request-list {
}\n"
test Dhcpd.lns get gh34_empty =
{ "@if" = "exists dhcp-parameter-request-list" }
let gh34_empty_multi = "subnet 192.168.100.0 netmask 255.255.255.0 {
if true {
} elsif false {
} else {
}
}\n"
test Dhcpd.lns get gh34_empty_multi =
{ "subnet"
{ "network" = "192.168.100.0" }
{ "netmask" = "255.255.255.0" }
{ "@if" = "true"
{ "@elsif" = "false" }
{ "@else" } }
}
let gh34_simple = "if exists dhcp-parameter-request-list {
default-lease-time 600;
} else {
default-lease-time 200;
}\n"
test Dhcpd.lns get gh34_simple =
{ "@if" = "exists dhcp-parameter-request-list"
{ "default-lease-time" = "600" }
{ "@else"
{ "default-lease-time" = "200" } } }
test Dhcpd.lns get "omapi-key fookey;" =
{ "omapi-key" = "fookey" }
(* almost all DHCP groups should support braces starting on the next line *)
test Dhcpd.lns get "class introduction
{
}" =
{ "class" = "introduction" }
(* equals should work the same *)
test Dhcpd.lns get "option test_records code 123 =
string;" =
{ "rfc-code"
{ "label" = "test_records" }
{ "code" = "123" }
{ "type" = "string" }
}
test Dhcpd.lns get "deny members of \"Are things like () allowed?\";" =
{ "deny-members-of" = "Are things like () allowed?" }
test Dhcpd.lns get "deny unknown clients;" =
{ "deny" = "unknown clients" }
test Dhcpd.lns get "deny known-clients;" =
{ "deny" = "known-clients" }
test Dhcpd.lns get "set ClientMac = binary-to-ascii(16, 8, \":\" , substring(hardware, 1, 6));" =
{ "set" = "ClientMac"
{ "value" = "binary-to-ascii(16, 8, \":\" , substring(hardware, 1, 6))" }
}
test Dhcpd.lns get "set myvariable = foo;" =
{ "set" = "myvariable"
{ "value" = "foo" }
}
test Dhcpd.stmt_hardware get "hardware fddi 00:01:02:03:04:05;" =
{ "hardware"
{ "type" = "fddi" }
{ "address" = "00:01:02:03:04:05" }
}
test Dhcpd.lns get "on commit
{
set test = thing;
}" =
{ "on" = "commit"
{ "set" = "test"
{ "value" = "thing" }
}
}
(* key block get/put/set test *)
let key_tests = "key sample {
algorithm hmac-md5;
secret \"secret==\";
}
key \"interesting\" { };
key \"third key\" {
secret \"two==\";
}"
test Dhcpd.lns get key_tests =
{ "key_block" = "sample"
{ "algorithm" = "hmac-md5" }
{ "secret" = "secret==" }
}
{ "key_block" = "interesting" }
{ "key_block" = "third key"
{ "secret" = "two==" }
}
test Dhcpd.lns put key_tests after set "/key_block[1]" "sample2" =
"key sample2 {
algorithm hmac-md5;
secret \"secret==\";
}
key \"interesting\" { };
key \"third key\" {
secret \"two==\";
}"
test Dhcpd.lns get "group \"hello\" { }" =
{ "group" = "hello" }
test Dhcpd.lns get "class \"testing class with spaces and quotes and ()\" {}" =
{ "class" = "testing class with spaces and quotes and ()" }