/usr/src/linux-headers-5.15.0-181/arch/m68k/include/asm
Edit: /usr/src/linux-headers-5.15.0-181/arch/m68k/include/asm/mcfgpio.h (8269B)
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Coldfire generic GPIO support.
*
* (C) Copyright 2009, Steven King
*/
#ifndef mcfgpio_h
#define mcfgpio_h
#ifdef CONFIG_GPIOLIB
#include
#else
int __mcfgpio_get_value(unsigned gpio);
void __mcfgpio_set_value(unsigned gpio, int value);
int __mcfgpio_direction_input(unsigned gpio);
int __mcfgpio_direction_output(unsigned gpio, int value);
int __mcfgpio_request(unsigned gpio);
void __mcfgpio_free(unsigned gpio);
/* our alternate 'gpiolib' functions */
static inline int __gpio_get_value(unsigned gpio)
{
if (gpio < MCFGPIO_PIN_MAX)
return __mcfgpio_get_value(gpio);
else
return -EINVAL;
}
static inline void __gpio_set_value(unsigned gpio, int value)
{
if (gpio < MCFGPIO_PIN_MAX)
__mcfgpio_set_value(gpio, value);
}
static inline int __gpio_cansleep(unsigned gpio)
{
if (gpio < MCFGPIO_PIN_MAX)
return 0;
else
return -EINVAL;
}
static inline int __gpio_to_irq(unsigned gpio)
{
return -EINVAL;
}
static inline int gpio_direction_input(unsigned gpio)
{
if (gpio < MCFGPIO_PIN_MAX)
return __mcfgpio_direction_input(gpio);
else
return -EINVAL;
}
static inline int gpio_direction_output(unsigned gpio, int value)
{
if (gpio < MCFGPIO_PIN_MAX)
return __mcfgpio_direction_output(gpio, value);
else
return -EINVAL;
}
static inline int gpio_request(unsigned gpio, const char *label)
{
if (gpio < MCFGPIO_PIN_MAX)
return __mcfgpio_request(gpio);
else
return -EINVAL;
}
static inline void gpio_free(unsigned gpio)
{
if (gpio < MCFGPIO_PIN_MAX)
__mcfgpio_free(gpio);
}
#endif /* CONFIG_GPIOLIB */
/*
* The Freescale Coldfire family is quite varied in how they implement GPIO.
* Some parts have 8 bit ports, some have 16bit and some have 32bit; some have
* only one port, others have multiple ports; some have a single data latch
* for both input and output, others have a separate pin data register to read
* input; some require a read-modify-write access to change an output, others
* have set and clear registers for some of the outputs; Some have all the
* GPIOs in a single control area, others have some GPIOs implemented in
* different modules.
*
* This implementation attempts accommodate the differences while presenting
* a generic interface that will optimize to as few instructions as possible.
*/
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
defined(CONFIG_M53xx) || defined(CONFIG_M54xx) || \
defined(CONFIG_M5441x)
/* These parts have GPIO organized by 8 bit ports */
#define MCFGPIO_PORTTYPE u8
#define MCFGPIO_PORTSIZE 8
#define mcfgpio_read(port) __raw_readb(port)
#define mcfgpio_write(data, port) __raw_writeb(data, port)
#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272)
/* These parts have GPIO organized by 16 bit ports */
#define MCFGPIO_PORTTYPE u16
#define MCFGPIO_PORTSIZE 16
#define mcfgpio_read(port) __raw_readw(port)
#define mcfgpio_write(data, port) __raw_writew(data, port)
#elif defined(CONFIG_M5249) || defined(CONFIG_M525x)
/* These parts have GPIO organized by 32 bit ports */
#define MCFGPIO_PORTTYPE u32
#define MCFGPIO_PORTSIZE 32
#define mcfgpio_read(port) __raw_readl(port)
#define mcfgpio_write(data, port) __raw_writel(data, port)
#endif
#define mcfgpio_bit(gpio) (1 << ((gpio) % MCFGPIO_PORTSIZE))
#define mcfgpio_port(gpio) ((gpio) / MCFGPIO_PORTSIZE)
#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
defined(CONFIG_M53xx) || defined(CONFIG_M54xx) || \
defined(CONFIG_M5441x)
/*
* These parts have an 'Edge' Port module (external interrupt/GPIO) which uses
* read-modify-write to change an output and a GPIO module which has separate
* set/clr registers to directly change outputs with a single write access.
*/
#if defined(CONFIG_M528x)
/*
* The 528x also has GPIOs in other modules (GPT, QADC) which use
* read-modify-write as well as those controlled by the EPORT and GPIO modules.
*/
#define MCFGPIO_SCR_START 40
#elif defined(CONFIG_M5441x)
/* The m5441x EPORT doesn't have its own GPIO port, uses PORT C */
#define MCFGPIO_SCR_START 0
#else
#define MCFGPIO_SCR_START 8
#endif
#define MCFGPIO_SETR_PORT(gpio) (MCFGPIO_SETR + \
mcfgpio_port(gpio - MCFGPIO_SCR_START))
#define MCFGPIO_CLRR_PORT(gpio) (MCFGPIO_CLRR + \
mcfgpio_port(gpio - MCFGPIO_SCR_START))
#else
#define MCFGPIO_SCR_START MCFGPIO_PIN_MAX
/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */
#define MCFGPIO_SETR_PORT(gpio) 0
#define MCFGPIO_CLRR_PORT(gpio) 0
#endif
/*
* Coldfire specific helper functions
*/
/* return the port pin data register for a gpio */
static inline u32 __mcfgpio_ppdr(unsigned gpio)
{
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
defined(CONFIG_M5307) || defined(CONFIG_M5407)
return MCFSIM_PADAT;
#elif defined(CONFIG_M5272)
if (gpio < 16)
return MCFSIM_PADAT;
else if (gpio < 32)
return MCFSIM_PBDAT;
else
return MCFSIM_PCDAT;
#elif defined(CONFIG_M5249) || defined(CONFIG_M525x)
if (gpio < 32)
return MCFSIM2_GPIOREAD;
else
return MCFSIM2_GPIO1READ;
#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
defined(CONFIG_M53xx) || defined(CONFIG_M54xx) || \
defined(CONFIG_M5441x)
#if !defined(CONFIG_M5441x)
if (gpio < 8)
return MCFEPORT_EPPDR;
#if defined(CONFIG_M528x)
else if (gpio < 16)
return MCFGPTA_GPTPORT;
else if (gpio < 24)
return MCFGPTB_GPTPORT;
else if (gpio < 32)
return MCFQADC_PORTQA;
else if (gpio < 40)
return MCFQADC_PORTQB;
#endif /* defined(CONFIG_M528x) */
else
#endif /* !defined(CONFIG_M5441x) */
return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
#else
return 0;
#endif
}
/* return the port output data register for a gpio */
static inline u32 __mcfgpio_podr(unsigned gpio)
{
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
defined(CONFIG_M5307) || defined(CONFIG_M5407)
return MCFSIM_PADAT;
#elif defined(CONFIG_M5272)
if (gpio < 16)
return MCFSIM_PADAT;
else if (gpio < 32)
return MCFSIM_PBDAT;
else
return MCFSIM_PCDAT;
#elif defined(CONFIG_M5249) || defined(CONFIG_M525x)
if (gpio < 32)
return MCFSIM2_GPIOWRITE;
else
return MCFSIM2_GPIO1WRITE;
#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
defined(CONFIG_M53xx) || defined(CONFIG_M54xx) || \
defined(CONFIG_M5441x)
#if !defined(CONFIG_M5441x)
if (gpio < 8)
return MCFEPORT_EPDR;
#if defined(CONFIG_M528x)
else if (gpio < 16)
return MCFGPTA_GPTPORT;
else if (gpio < 24)
return MCFGPTB_GPTPORT;
else if (gpio < 32)
return MCFQADC_PORTQA;
else if (gpio < 40)
return MCFQADC_PORTQB;
#endif /* defined(CONFIG_M528x) */
else
#endif /* !defined(CONFIG_M5441x) */
return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
#else
return 0;
#endif
}
/* return the port direction data register for a gpio */
static inline u32 __mcfgpio_pddr(unsigned gpio)
{
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
defined(CONFIG_M5307) || defined(CONFIG_M5407)
return MCFSIM_PADDR;
#elif defined(CONFIG_M5272)
if (gpio < 16)
return MCFSIM_PADDR;
else if (gpio < 32)
return MCFSIM_PBDDR;
else
return MCFSIM_PCDDR;
#elif defined(CONFIG_M5249) || defined(CONFIG_M525x)
if (gpio < 32)
return MCFSIM2_GPIOENABLE;
else
return MCFSIM2_GPIO1ENABLE;
#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
defined(CONFIG_M53xx) || defined(CONFIG_M54xx) || \
defined(CONFIG_M5441x)
#if !defined(CONFIG_M5441x)
if (gpio < 8)
return MCFEPORT_EPDDR;
#if defined(CONFIG_M528x)
else if (gpio < 16)
return MCFGPTA_GPTDDR;
else if (gpio < 24)
return MCFGPTB_GPTDDR;
else if (gpio < 32)
return MCFQADC_DDRQA;
else if (gpio < 40)
return MCFQADC_DDRQB;
#endif /* defined(CONFIG_M528x) */
else
#endif /* !defined(CONFIG_M5441x) */
return MCFGPIO_PDDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
#else
return 0;
#endif
}
#endif /* mcfgpio_h */