/usr/src/linux-headers-5.15.0-181/arch/parisc/include/asm
Edit: /usr/src/linux-headers-5.15.0-181/arch/parisc/include/asm/eisa_eeprom.h (4318B)
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* eisa_eeprom.h - provide support for EISA adapters in PA-RISC machines
*
* Copyright (c) 2001, 2002 Daniel Engstrom <5116@telia.com>
*/
#ifndef ASM_EISA_EEPROM_H
#define ASM_EISA_EEPROM_H
extern void __iomem *eisa_eeprom_addr;
#define HPEE_MAX_LENGTH 0x2000 /* maximum eeprom length */
#define HPEE_SLOT_INFO(slot) (20+(48*slot))
struct eeprom_header
{
u_int32_t num_writes; /* number of writes */
u_int8_t flags; /* flags, usage? */
u_int8_t ver_maj;
u_int8_t ver_min;
u_int8_t num_slots; /* number of EISA slots in system */
u_int16_t csum; /* checksum, I don't know how to calculate this */
u_int8_t pad[10];
} __attribute__ ((packed));
struct eeprom_eisa_slot_info
{
u_int32_t eisa_slot_id;
u_int32_t config_data_offset;
u_int32_t num_writes;
u_int16_t csum;
u_int16_t num_functions;
u_int16_t config_data_length;
/* bits 0..3 are the duplicate slot id */
#define HPEE_SLOT_INFO_EMBEDDED 0x10
#define HPEE_SLOT_INFO_VIRTUAL 0x20
#define HPEE_SLOT_INFO_NO_READID 0x40
#define HPEE_SLOT_INFO_DUPLICATE 0x80
u_int8_t slot_info;
#define HPEE_SLOT_FEATURES_ENABLE 0x01
#define HPEE_SLOT_FEATURES_IOCHK 0x02
#define HPEE_SLOT_FEATURES_CFG_INCOMPLETE 0x80
u_int8_t slot_features;
u_int8_t ver_min;
u_int8_t ver_maj;
#define HPEE_FUNCTION_INFO_HAVE_TYPE 0x01
#define HPEE_FUNCTION_INFO_HAVE_MEMORY 0x02
#define HPEE_FUNCTION_INFO_HAVE_IRQ 0x04
#define HPEE_FUNCTION_INFO_HAVE_DMA 0x08
#define HPEE_FUNCTION_INFO_HAVE_PORT 0x10
#define HPEE_FUNCTION_INFO_HAVE_PORT_INIT 0x20
/* I think there are two slighty different
* versions of the function_info field
* one int the fixed header and one optional
* in the parsed slot data area */
#define HPEE_FUNCTION_INFO_HAVE_FUNCTION 0x01
#define HPEE_FUNCTION_INFO_F_DISABLED 0x80
#define HPEE_FUNCTION_INFO_CFG_FREE_FORM 0x40
u_int8_t function_info;
#define HPEE_FLAG_BOARD_IS_ISA 0x01 /* flag and minor version for isa board */
u_int8_t flags;
u_int8_t pad[24];
} __attribute__ ((packed));
#define HPEE_MEMORY_MAX_ENT 9
/* memory descriptor: byte 0 */
#define HPEE_MEMORY_WRITABLE 0x01
#define HPEE_MEMORY_CACHABLE 0x02
#define HPEE_MEMORY_TYPE_MASK 0x18
#define HPEE_MEMORY_TYPE_SYS 0x00
#define HPEE_MEMORY_TYPE_EXP 0x08
#define HPEE_MEMORY_TYPE_VIR 0x10
#define HPEE_MEMORY_TYPE_OTH 0x18
#define HPEE_MEMORY_SHARED 0x20
#define HPEE_MEMORY_MORE 0x80
/* memory descriptor: byte 1 */
#define HPEE_MEMORY_WIDTH_MASK 0x03
#define HPEE_MEMORY_WIDTH_BYTE 0x00
#define HPEE_MEMORY_WIDTH_WORD 0x01
#define HPEE_MEMORY_WIDTH_DWORD 0x02
#define HPEE_MEMORY_DECODE_MASK 0x0c
#define HPEE_MEMORY_DECODE_20BITS 0x00
#define HPEE_MEMORY_DECODE_24BITS 0x04
#define HPEE_MEMORY_DECODE_32BITS 0x08
/* byte 2 and 3 are a 16bit LE value
* containing the memory size in kilobytes */
/* byte 4,5,6 are a 24bit LE value
* containing the memory base address */
#define HPEE_IRQ_MAX_ENT 7
/* Interrupt entry: byte 0 */
#define HPEE_IRQ_CHANNEL_MASK 0xf
#define HPEE_IRQ_TRIG_LEVEL 0x20
#define HPEE_IRQ_MORE 0x80
/* byte 1 seems to be unused */
#define HPEE_DMA_MAX_ENT 4
/* dma entry: byte 0 */
#define HPEE_DMA_CHANNEL_MASK 7
#define HPEE_DMA_SIZE_MASK 0xc
#define HPEE_DMA_SIZE_BYTE 0x0
#define HPEE_DMA_SIZE_WORD 0x4
#define HPEE_DMA_SIZE_DWORD 0x8
#define HPEE_DMA_SHARED 0x40
#define HPEE_DMA_MORE 0x80
/* dma entry: byte 1 */
#define HPEE_DMA_TIMING_MASK 0x30
#define HPEE_DMA_TIMING_ISA 0x0
#define HPEE_DMA_TIMING_TYPEA 0x10
#define HPEE_DMA_TIMING_TYPEB 0x20
#define HPEE_DMA_TIMING_TYPEC 0x30
#define HPEE_PORT_MAX_ENT 20
/* port entry byte 0 */
#define HPEE_PORT_SIZE_MASK 0x1f
#define HPEE_PORT_SHARED 0x40
#define HPEE_PORT_MORE 0x80
/* byte 1 and 2 is a 16bit LE value
* containing the start port number */
#define HPEE_PORT_INIT_MAX_LEN 60 /* in bytes here */
/* port init entry byte 0 */
#define HPEE_PORT_INIT_WIDTH_MASK 0x3
#define HPEE_PORT_INIT_WIDTH_BYTE 0x0
#define HPEE_PORT_INIT_WIDTH_WORD 0x1
#define HPEE_PORT_INIT_WIDTH_DWORD 0x2
#define HPEE_PORT_INIT_MASK 0x4
#define HPEE_PORT_INIT_MORE 0x80
#define HPEE_SELECTION_MAX_ENT 26
#define HPEE_TYPE_MAX_LEN 80
#endif