/usr/src/linux-headers-5.15.0-181/include/sound
Edit: /usr/src/linux-headers-5.15.0-181/include/sound/hda_register.h (10655B)
/* SPDX-License-Identifier: GPL-2.0 */
/*
* HD-audio controller (Azalia) registers and helpers
*
* For traditional reasons, we still use azx_ prefix here
*/
#ifndef __SOUND_HDA_REGISTER_H
#define __SOUND_HDA_REGISTER_H
#include
#include
#define AZX_REG_GCAP 0x00
#define AZX_GCAP_64OK (1 << 0) /* 64bit address support */
#define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */
#define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */
#define AZX_GCAP_ISS (15 << 8) /* # of input streams */
#define AZX_GCAP_OSS (15 << 12) /* # of output streams */
#define AZX_REG_VMIN 0x02
#define AZX_REG_VMAJ 0x03
#define AZX_REG_OUTPAY 0x04
#define AZX_REG_INPAY 0x06
#define AZX_REG_GCTL 0x08
#define AZX_GCTL_RESET (1 << 0) /* controller reset */
#define AZX_GCTL_FCNTRL (1 << 1) /* flush control */
#define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */
#define AZX_REG_WAKEEN 0x0c
#define AZX_REG_STATESTS 0x0e
#define AZX_REG_GSTS 0x10
#define AZX_GSTS_FSTS (1 << 1) /* flush status */
#define AZX_REG_GCAP2 0x12
#define AZX_REG_LLCH 0x14
#define AZX_REG_OUTSTRMPAY 0x18
#define AZX_REG_INSTRMPAY 0x1A
#define AZX_REG_INTCTL 0x20
#define AZX_REG_INTSTS 0x24
#define AZX_REG_WALLCLK 0x30 /* 24Mhz source */
#define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */
#define AZX_REG_SSYNC 0x38
#define AZX_REG_CORBLBASE 0x40
#define AZX_REG_CORBUBASE 0x44
#define AZX_REG_CORBWP 0x48
#define AZX_REG_CORBRP 0x4a
#define AZX_CORBRP_RST (1 << 15) /* read pointer reset */
#define AZX_REG_CORBCTL 0x4c
#define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */
#define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */
#define AZX_REG_CORBSTS 0x4d
#define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */
#define AZX_REG_CORBSIZE 0x4e
#define AZX_REG_RIRBLBASE 0x50
#define AZX_REG_RIRBUBASE 0x54
#define AZX_REG_RIRBWP 0x58
#define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */
#define AZX_REG_RINTCNT 0x5a
#define AZX_REG_RIRBCTL 0x5c
#define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */
#define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */
#define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */
#define AZX_REG_RIRBSTS 0x5d
#define AZX_RBSTS_IRQ (1 << 0) /* response irq */
#define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */
#define AZX_REG_RIRBSIZE 0x5e
#define AZX_REG_IC 0x60
#define AZX_REG_IR 0x64
#define AZX_REG_IRS 0x68
#define AZX_IRS_VALID (1<<1)
#define AZX_IRS_BUSY (1<<0)
#define AZX_REG_DPLBASE 0x70
#define AZX_REG_DPUBASE 0x74
#define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */
/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */
enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
/* stream register offsets from stream base */
#define AZX_REG_SD_CTL 0x00
#define AZX_REG_SD_CTL_3B 0x02 /* 3rd byte of SD_CTL register */
#define AZX_REG_SD_STS 0x03
#define AZX_REG_SD_LPIB 0x04
#define AZX_REG_SD_CBL 0x08
#define AZX_REG_SD_LVI 0x0c
#define AZX_REG_SD_FIFOW 0x0e
#define AZX_REG_SD_FIFOSIZE 0x10
#define AZX_REG_SD_FORMAT 0x12
#define AZX_REG_SD_FIFOL 0x14
#define AZX_REG_SD_BDLPL 0x18
#define AZX_REG_SD_BDLPU 0x1c
/* GTS registers */
#define AZX_REG_LLCH 0x14
#define AZX_REG_GTS_BASE 0x520
#define AZX_REG_GTSCC (AZX_REG_GTS_BASE + 0x00)
#define AZX_REG_WALFCC (AZX_REG_GTS_BASE + 0x04)
#define AZX_REG_TSCCL (AZX_REG_GTS_BASE + 0x08)
#define AZX_REG_TSCCU (AZX_REG_GTS_BASE + 0x0C)
#define AZX_REG_LLPFOC (AZX_REG_GTS_BASE + 0x14)
#define AZX_REG_LLPCL (AZX_REG_GTS_BASE + 0x18)
#define AZX_REG_LLPCU (AZX_REG_GTS_BASE + 0x1C)
/* Haswell/Broadwell display HD-A controller Extended Mode registers */
#define AZX_REG_HSW_EM4 0x100c
#define AZX_REG_HSW_EM5 0x1010
/* Skylake/Broxton vendor-specific registers */
#define AZX_REG_VS_EM1 0x1000
#define AZX_REG_VS_INRC 0x1004
#define AZX_REG_VS_OUTRC 0x1008
#define AZX_REG_VS_FIFOTRK 0x100C
#define AZX_REG_VS_FIFOTRK2 0x1010
#define AZX_REG_VS_EM2 0x1030
#define AZX_REG_VS_EM3L 0x1038
#define AZX_REG_VS_EM3U 0x103C
#define AZX_REG_VS_EM4L 0x1040
#define AZX_REG_VS_EM4U 0x1044
#define AZX_REG_VS_LTRP 0x1048
#define AZX_REG_VS_D0I3C 0x104A
#define AZX_REG_VS_PCE 0x104B
#define AZX_REG_VS_L2MAGC 0x1050
#define AZX_REG_VS_L2LAHPT 0x1054
#define AZX_REG_VS_SDXDPIB_XBASE 0x1084
#define AZX_REG_VS_SDXDPIB_XINTERVAL 0x20
#define AZX_REG_VS_SDXEFIFOS_XBASE 0x1094
#define AZX_REG_VS_SDXEFIFOS_XINTERVAL 0x20
/* PCI space */
#define AZX_PCIREG_TCSEL 0x44
/*
* other constants
*/
/* max number of fragments - we may use more if allocating more pages for BDL */
#define BDL_SIZE 4096
#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16)
#define AZX_MAX_FRAG 32
/*
* max buffer size - artificial 4MB limit per stream to avoid big allocations
* In theory it can be really big, but as it is per stream on systems with many streams memory could
* be quickly saturated if userspace requests maximum buffer size for each of them.
*/
#define AZX_MAX_BUF_SIZE (4*1024*1024)
/* RIRB int mask: overrun[2], response[0] */
#define RIRB_INT_RESPONSE 0x01
#define RIRB_INT_OVERRUN 0x04
#define RIRB_INT_MASK 0x05
/* STATESTS int mask: S3,SD2,SD1,SD0 */
#define STATESTS_INT_MASK ((1 << HDA_MAX_CODECS) - 1)
/* SD_CTL bits */
#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */
#define SD_CTL_DMA_START 0x02 /* stream DMA start bit */
#define SD_CTL_STRIPE (3 << 16) /* stripe control */
#define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */
#define SD_CTL_DIR (1 << 19) /* bi-directional stream */
#define SD_CTL_STREAM_TAG_MASK (0xf << 20)
#define SD_CTL_STREAM_TAG_SHIFT 20
/* SD_CTL and SD_STS */
#define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */
#define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */
#define SD_INT_COMPLETE 0x04 /* completion interrupt */
#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\
SD_INT_COMPLETE)
#define SD_CTL_STRIPE_MASK 0x3 /* stripe control mask */
/* SD_STS */
#define SD_STS_FIFO_READY 0x20 /* FIFO ready */
/* INTCTL and INTSTS */
#define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */
#define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */
#define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */
/* below are so far hardcoded - should read registers in future */
#define AZX_MAX_CORB_ENTRIES 256
#define AZX_MAX_RIRB_ENTRIES 256
/* Capability header Structure */
#define AZX_REG_CAP_HDR 0x0
#define AZX_CAP_HDR_VER_OFF 28
#define AZX_CAP_HDR_VER_MASK (0xF << AZX_CAP_HDR_VER_OFF)
#define AZX_CAP_HDR_ID_OFF 16
#define AZX_CAP_HDR_ID_MASK (0xFFF << AZX_CAP_HDR_ID_OFF)
#define AZX_CAP_HDR_NXT_PTR_MASK 0xFFFF
/* registers of Software Position Based FIFO Capability Structure */
#define AZX_SPB_CAP_ID 0x4
#define AZX_REG_SPB_BASE_ADDR 0x700
#define AZX_REG_SPB_SPBFCH 0x00
#define AZX_REG_SPB_SPBFCCTL 0x04
/* Base used to calculate the iterating register offset */
#define AZX_SPB_BASE 0x08
/* Interval used to calculate the iterating register offset */
#define AZX_SPB_INTERVAL 0x08
/* SPIB base */
#define AZX_SPB_SPIB 0x00
/* SPIB MAXFIFO base*/
#define AZX_SPB_MAXFIFO 0x04
/* registers of Global Time Synchronization Capability Structure */
#define AZX_GTS_CAP_ID 0x1
#define AZX_REG_GTS_GTSCH 0x00
#define AZX_REG_GTS_GTSCD 0x04
#define AZX_REG_GTS_GTSCTLAC 0x0C
#define AZX_GTS_BASE 0x20
#define AZX_GTS_INTERVAL 0x20
/* registers for Processing Pipe Capability Structure */
#define AZX_PP_CAP_ID 0x3
#define AZX_REG_PP_PPCH 0x10
#define AZX_REG_PP_PPCTL 0x04
#define AZX_PPCTL_PIE (1<<31)
#define AZX_PPCTL_GPROCEN (1<<30)
/* _X_ = dma engine # and cannot * exceed 29 (per spec max 30 dma engines) */
#define AZX_PPCTL_PROCEN(_X_) (1<<(_X_))
#define AZX_REG_PP_PPSTS 0x08
#define AZX_PPHC_BASE 0x10
#define AZX_PPHC_INTERVAL 0x10
#define AZX_REG_PPHCLLPL 0x0
#define AZX_REG_PPHCLLPU 0x4
#define AZX_REG_PPHCLDPL 0x8
#define AZX_REG_PPHCLDPU 0xC
#define AZX_PPLC_BASE 0x10
#define AZX_PPLC_MULTI 0x10
#define AZX_PPLC_INTERVAL 0x10
#define AZX_REG_PPLCCTL 0x0
#define AZX_PPLCCTL_STRM_BITS 4
#define AZX_PPLCCTL_STRM_SHIFT 20
#define AZX_REG_MASK(bit_num, offset) \
(((1 << (bit_num)) - 1) << (offset))
#define AZX_PPLCCTL_STRM_MASK \
AZX_REG_MASK(AZX_PPLCCTL_STRM_BITS, AZX_PPLCCTL_STRM_SHIFT)
#define AZX_PPLCCTL_RUN (1<<1)
#define AZX_PPLCCTL_STRST (1<<0)
#define AZX_REG_PPLCFMT 0x4
#define AZX_REG_PPLCLLPL 0x8
#define AZX_REG_PPLCLLPU 0xC
/* registers for Multiple Links Capability Structure */
#define AZX_ML_CAP_ID 0x2
#define AZX_REG_ML_MLCH 0x00
#define AZX_REG_ML_MLCD 0x04
#define AZX_ML_BASE 0x40
#define AZX_ML_INTERVAL 0x40
#define AZX_REG_ML_LCAP 0x00
#define AZX_REG_ML_LCTL 0x04
#define AZX_REG_ML_LOSIDV 0x08
#define AZX_REG_ML_LSDIID 0x0C
#define AZX_REG_ML_LPSOO 0x10
#define AZX_REG_ML_LPSIO 0x12
#define AZX_REG_ML_LWALFC 0x18
#define AZX_REG_ML_LOUTPAY 0x20
#define AZX_REG_ML_LINPAY 0x30
/* bit0 is reserved, with BIT(1) mapping to stream1 */
#define ML_LOSIDV_STREAM_MASK 0xFFFE
#define ML_LCTL_SCF_MASK 0xF
#define AZX_MLCTL_SPA (0x1 << 16)
#define AZX_MLCTL_CPA (0x1 << 23)
#define AZX_MLCTL_SPA_SHIFT 16
#define AZX_MLCTL_CPA_SHIFT 23
/* registers for DMA Resume Capability Structure */
#define AZX_DRSM_CAP_ID 0x5
#define AZX_REG_DRSM_CTL 0x4
/* Base used to calculate the iterating register offset */
#define AZX_DRSM_BASE 0x08
/* Interval used to calculate the iterating register offset */
#define AZX_DRSM_INTERVAL 0x08
/* Global time synchronization registers */
#define GTSCC_TSCCD_MASK 0x80000000
#define GTSCC_TSCCD_SHIFT BIT(31)
#define GTSCC_TSCCI_MASK 0x20
#define GTSCC_CDMAS_DMA_DIR_SHIFT 4
#define WALFCC_CIF_MASK 0x1FF
#define WALFCC_FN_SHIFT 9
#define HDA_CLK_CYCLES_PER_FRAME 512
/*
* An error occurs near frame "rollover". The clocks in frame value indicates
* whether this error may have occurred. Here we use the value of 10. Please
* see the errata for the right number [<10]
*/
#define HDA_MAX_CYCLE_VALUE 499
#define HDA_MAX_CYCLE_OFFSET 10
#define HDA_MAX_CYCLE_READ_RETRY 10
#define TSCCU_CCU_SHIFT 32
#define LLPC_CCU_SHIFT 32
/*
* helpers to read the stream position
*/
static inline unsigned int
snd_hdac_stream_get_pos_lpib(struct hdac_stream *stream)
{
return snd_hdac_stream_readl(stream, SD_LPIB);
}
static inline unsigned int
snd_hdac_stream_get_pos_posbuf(struct hdac_stream *stream)
{
return le32_to_cpu(*stream->posbuf);
}
#endif /* __SOUND_HDA_REGISTER_H */