/usr/src/linux-headers-5.15.0-190/arch/mips/include/asm
Edit: /usr/src/linux-headers-5.15.0-190/arch/mips/include/asm/processor.h (11321B)
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1994 Waldorf GMBH
* Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle
* Copyright (C) 1996 Paul M. Antoine
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
#ifndef _ASM_PROCESSOR_H
#define _ASM_PROCESSOR_H
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
/*
* System setup and hardware flags..
*/
extern unsigned int vced_count, vcei_count;
extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
#ifdef CONFIG_32BIT
/*
* User space process size: 2GB. This is hardcoded into a few places,
* so don't change it unless you know what you are doing.
*/
#define TASK_SIZE 0x80000000UL
#define STACK_TOP_MAX TASK_SIZE
#define TASK_IS_32BIT_ADDR 1
#endif
#ifdef CONFIG_64BIT
/*
* User space process size: 1TB. This is hardcoded into a few places,
* so don't change it unless you know what you are doing. TASK_SIZE
* is limited to 1TB by the R4000 architecture; R10000 and better can
* support 16TB; the architectural reserve for future expansion is
* 8192EB ...
*/
#define TASK_SIZE32 0x7fff8000UL
#ifdef CONFIG_MIPS_VA_BITS_48
#define TASK_SIZE64 (0x1UL << ((cpu_data[0].vmbits>48)?48:cpu_data[0].vmbits))
#else
#define TASK_SIZE64 0x10000000000UL
#endif
#define TASK_SIZE (test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE64)
#define STACK_TOP_MAX TASK_SIZE64
#define TASK_SIZE_OF(tsk) \
(test_tsk_thread_flag(tsk, TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE64)
#define TASK_IS_32BIT_ADDR test_thread_flag(TIF_32BIT_ADDR)
#endif
#define VDSO_RANDOMIZE_SIZE (TASK_IS_32BIT_ADDR ? SZ_1M : SZ_64M)
extern unsigned long mips_stack_top(void);
#define STACK_TOP mips_stack_top()
/*
* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3)
#define NUM_FPU_REGS 32
#ifdef CONFIG_CPU_HAS_MSA
# define FPU_REG_WIDTH 128
#else
# define FPU_REG_WIDTH 64
#endif
union fpureg {
__u32 val32[FPU_REG_WIDTH / 32];
__u64 val64[FPU_REG_WIDTH / 64];
};
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# define FPR_IDX(width, idx) (idx)
#else
# define FPR_IDX(width, idx) ((idx) ^ ((64 / (width)) - 1))
#endif
#define BUILD_FPR_ACCESS(width) \
static inline u##width get_fpr##width(union fpureg *fpr, unsigned idx) \
{ \
return fpr->val##width[FPR_IDX(width, idx)]; \
} \
\
static inline void set_fpr##width(union fpureg *fpr, unsigned idx, \
u##width val) \
{ \
fpr->val##width[FPR_IDX(width, idx)] = val; \
}
BUILD_FPR_ACCESS(32)
BUILD_FPR_ACCESS(64)
/*
* It would be nice to add some more fields for emulator statistics,
* the additional information is private to the FPU emulator for now.
* See arch/mips/include/asm/fpu_emulator.h.
*/
struct mips_fpu_struct {
union fpureg fpr[NUM_FPU_REGS];
unsigned int fcr31;
unsigned int msacsr;
};
#define NUM_DSP_REGS 6
typedef unsigned long dspreg_t;
struct mips_dsp_state {
dspreg_t dspr[NUM_DSP_REGS];
unsigned int dspcontrol;
};
#define INIT_CPUMASK { \
{0,} \
}
struct mips3264_watch_reg_state {
/* The width of watchlo is 32 in a 32 bit kernel and 64 in a
64 bit kernel. We use unsigned long as it has the same
property. */
unsigned long watchlo[NUM_WATCH_REGS];
/* Only the mask and IRW bits from watchhi. */
u16 watchhi[NUM_WATCH_REGS];
};
union mips_watch_reg_state {
struct mips3264_watch_reg_state mips3264;
};
#if defined(CONFIG_CPU_CAVIUM_OCTEON)
struct octeon_cop2_state {
/* DMFC2 rt, 0x0201 */
unsigned long cop2_crc_iv;
/* DMFC2 rt, 0x0202 (Set with DMTC2 rt, 0x1202) */
unsigned long cop2_crc_length;
/* DMFC2 rt, 0x0200 (set with DMTC2 rt, 0x4200) */
unsigned long cop2_crc_poly;
/* DMFC2 rt, 0x0402; DMFC2 rt, 0x040A */
unsigned long cop2_llm_dat[2];
/* DMFC2 rt, 0x0084 */
unsigned long cop2_3des_iv;
/* DMFC2 rt, 0x0080; DMFC2 rt, 0x0081; DMFC2 rt, 0x0082 */
unsigned long cop2_3des_key[3];
/* DMFC2 rt, 0x0088 (Set with DMTC2 rt, 0x0098) */
unsigned long cop2_3des_result;
/* DMFC2 rt, 0x0111 (FIXME: Read Pass1 Errata) */
unsigned long cop2_aes_inp0;
/* DMFC2 rt, 0x0102; DMFC2 rt, 0x0103 */
unsigned long cop2_aes_iv[2];
/* DMFC2 rt, 0x0104; DMFC2 rt, 0x0105; DMFC2 rt, 0x0106; DMFC2
* rt, 0x0107 */
unsigned long cop2_aes_key[4];
/* DMFC2 rt, 0x0110 */
unsigned long cop2_aes_keylen;
/* DMFC2 rt, 0x0100; DMFC2 rt, 0x0101 */
unsigned long cop2_aes_result[2];
/* DMFC2 rt, 0x0240; DMFC2 rt, 0x0241; DMFC2 rt, 0x0242; DMFC2
* rt, 0x0243; DMFC2 rt, 0x0244; DMFC2 rt, 0x0245; DMFC2 rt,
* 0x0246; DMFC2 rt, 0x0247; DMFC2 rt, 0x0248; DMFC2 rt,
* 0x0249; DMFC2 rt, 0x024A; DMFC2 rt, 0x024B; DMFC2 rt,
* 0x024C; DMFC2 rt, 0x024D; DMFC2 rt, 0x024E - Pass2 */
unsigned long cop2_hsh_datw[15];
/* DMFC2 rt, 0x0250; DMFC2 rt, 0x0251; DMFC2 rt, 0x0252; DMFC2
* rt, 0x0253; DMFC2 rt, 0x0254; DMFC2 rt, 0x0255; DMFC2 rt,
* 0x0256; DMFC2 rt, 0x0257 - Pass2 */
unsigned long cop2_hsh_ivw[8];
/* DMFC2 rt, 0x0258; DMFC2 rt, 0x0259 - Pass2 */
unsigned long cop2_gfm_mult[2];
/* DMFC2 rt, 0x025E - Pass2 */
unsigned long cop2_gfm_poly;
/* DMFC2 rt, 0x025A; DMFC2 rt, 0x025B - Pass2 */
unsigned long cop2_gfm_result[2];
/* DMFC2 rt, 0x24F, DMFC2 rt, 0x50, OCTEON III */
unsigned long cop2_sha3[2];
};
#define COP2_INIT \
.cp2 = {0,},
struct octeon_cvmseg_state {
unsigned long cvmseg[CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE]
[cpu_dcache_line_size() / sizeof(unsigned long)];
};
#elif defined(CONFIG_CPU_XLP)
struct nlm_cop2_state {
u64 rx[4];
u64 tx[4];
u32 tx_msg_status;
u32 rx_msg_status;
};
#define COP2_INIT \
.cp2 = {{0}, {0}, 0, 0},
#else
#define COP2_INIT
#endif
#ifdef CONFIG_CPU_HAS_MSA
# define ARCH_MIN_TASKALIGN 16
# define FPU_ALIGN __aligned(16)
#else
# define ARCH_MIN_TASKALIGN 8
# define FPU_ALIGN
#endif
struct mips_abi;
/*
* If you change thread_struct remember to change the #defines below too!
*/
struct thread_struct {
/* Saved main processor registers. */
unsigned long reg16;
unsigned long reg17, reg18, reg19, reg20, reg21, reg22, reg23;
unsigned long reg29, reg30, reg31;
/* Saved cp0 stuff. */
unsigned long cp0_status;
#ifdef CONFIG_MIPS_FP_SUPPORT
/* Saved fpu/fpu emulator stuff. */
struct mips_fpu_struct fpu FPU_ALIGN;
/* Assigned branch delay slot 'emulation' frame */
atomic_t bd_emu_frame;
/* PC of the branch from a branch delay slot 'emulation' */
unsigned long bd_emu_branch_pc;
/* PC to continue from following a branch delay slot 'emulation' */
unsigned long bd_emu_cont_pc;
#endif
#ifdef CONFIG_MIPS_MT_FPAFF
/* Emulated instruction count */
unsigned long emulated_fp;
/* Saved per-thread scheduler affinity mask */
cpumask_t user_cpus_allowed;
#endif /* CONFIG_MIPS_MT_FPAFF */
/* Saved state of the DSP ASE, if available. */
struct mips_dsp_state dsp;
/* Saved watch register state, if available. */
union mips_watch_reg_state watch;
/* Other stuff associated with the thread. */
unsigned long cp0_badvaddr; /* Last user fault */
unsigned long cp0_baduaddr; /* Last kernel fault accessing USEG */
unsigned long error_code;
unsigned long trap_nr;
#ifdef CONFIG_CPU_CAVIUM_OCTEON
struct octeon_cop2_state cp2 __attribute__ ((__aligned__(128)));
struct octeon_cvmseg_state cvmseg __attribute__ ((__aligned__(128)));
#endif
#ifdef CONFIG_CPU_XLP
struct nlm_cop2_state cp2;
#endif
struct mips_abi *abi;
};
#ifdef CONFIG_MIPS_MT_FPAFF
#define FPAFF_INIT \
.emulated_fp = 0, \
.user_cpus_allowed = INIT_CPUMASK,
#else
#define FPAFF_INIT
#endif /* CONFIG_MIPS_MT_FPAFF */
#ifdef CONFIG_MIPS_FP_SUPPORT
# define FPU_INIT \
.fpu = { \
.fpr = {{{0,},},}, \
.fcr31 = 0, \
.msacsr = 0, \
}, \
/* Delay slot emulation */ \
.bd_emu_frame = ATOMIC_INIT(BD_EMUFRAME_NONE), \
.bd_emu_branch_pc = 0, \
.bd_emu_cont_pc = 0,
#else
# define FPU_INIT
#endif
#define INIT_THREAD { \
/* \
* Saved main processor registers \
*/ \
.reg16 = 0, \
.reg17 = 0, \
.reg18 = 0, \
.reg19 = 0, \
.reg20 = 0, \
.reg21 = 0, \
.reg22 = 0, \
.reg23 = 0, \
.reg29 = 0, \
.reg30 = 0, \
.reg31 = 0, \
/* \
* Saved cp0 stuff \
*/ \
.cp0_status = 0, \
/* \
* Saved FPU/FPU emulator stuff \
*/ \
FPU_INIT \
/* \
* FPU affinity state (null if not FPAFF) \
*/ \
FPAFF_INIT \
/* \
* Saved DSP stuff \
*/ \
.dsp = { \
.dspr = {0, }, \
.dspcontrol = 0, \
}, \
/* \
* saved watch register stuff \
*/ \
.watch = {{{0,},},}, \
/* \
* Other stuff associated with the process \
*/ \
.cp0_badvaddr = 0, \
.cp0_baduaddr = 0, \
.error_code = 0, \
.trap_nr = 0, \
/* \
* Platform specific cop2 registers(null if no COP2) \
*/ \
COP2_INIT \
}
struct task_struct;
/* Free all resources held by a thread. */
#define release_thread(thread) do { } while(0)
/*
* Do necessary setup to start up a newly executed thread.
*/
extern void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp);
static inline void flush_thread(void)
{
}
unsigned long __get_wchan(struct task_struct *p);
#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + \
THREAD_SIZE - 32 - sizeof(struct pt_regs))
#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk))
#define KSTK_EIP(tsk) (task_pt_regs(tsk)->cp0_epc)
#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29])
#define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status)
/*
* Return_address is a replacement for __builtin_return_address(count)
* which on certain architectures cannot reasonably be implemented in GCC
* (MIPS, Alpha) or is unusable with -fomit-frame-pointer (i386).
* Note that __builtin_return_address(x>=1) is forbidden because GCC
* aborts compilation on some CPUs. It's simply not possible to unwind
* some CPU's stackframes.
*
* __builtin_return_address works only for non-leaf functions. We avoid the
* overhead of a function call by forcing the compiler to save the return
* address register on the stack.
*/
#define return_address() ({__asm__ __volatile__("":::"$31");__builtin_return_address(0);})
#ifdef CONFIG_CPU_HAS_PREFETCH
#define ARCH_HAS_PREFETCH
#define prefetch(x) __builtin_prefetch((x), 0, 1)
#define ARCH_HAS_PREFETCHW
#define prefetchw(x) __builtin_prefetch((x), 1, 1)
#endif
/*
* Functions & macros implementing the PR_GET_FP_MODE & PR_SET_FP_MODE options
* to the prctl syscall.
*/
extern int mips_get_process_fp_mode(struct task_struct *task);
extern int mips_set_process_fp_mode(struct task_struct *task,
unsigned int value);
#define GET_FP_MODE(task) mips_get_process_fp_mode(task)
#define SET_FP_MODE(task,value) mips_set_process_fp_mode(task, value)
#endif /* _ASM_PROCESSOR_H */