FM / etc

/etc

Name	Size	Mode	Actions
alternatives/	-	0755	rm
apache2/	-	0755	rm
apparmor/	-	0755	rm
apparmor.d/	-	0755	rm
apport/	-	0755	rm
apt/	-	0755	rm
avahi/	-	0755	rm
bash_completion.d/	-	0755	rm
binfmt.d/	-	0755	rm
byobu/	-	0755	rm
ca-certificates/	-	0755	rm
calendar/	-	0755	rm
cloud/	-	0755	rm
console-setup/	-	0755	rm
containerd/	-	0755	rm
cron.d/	-	0755	rm
cron.daily/	-	0755	rm
cron.hourly/	-	0755	rm
cron.monthly/	-	0755	rm
cron.weekly/	-	0755	rm
cryptsetup-initramfs/	-	0755	rm
dbconfig-common/	-	0755	rm
dbus-1/	-	0755	rm
default/	-	0755	rm
depmod.d/	-	0755	rm
dhcp/	-	0755	rm
docker/	-	0755	rm
dpkg/	-	0755	rm
emacs/	-	0755	rm
fail2ban/	-	0755	rm
fonts/	-	0755	rm
fwupd/	-	0755	rm
ghostscript/	-	0755	rm
groff/	-	0755	rm
grub.d/	-	0755	rm
gss/	-	0755	rm
ImageMagick-6/	-	0755	rm
init/	-	0755	rm
init.d/	-	0755	rm
initramfs-tools/	-	0755	rm
insserv.conf.d/	-	0755	rm
iproute2/	-	0755	rm
iscsi/	-	0755	rm
kernel/	-	0755	rm
landscape/	-	0775	rm
ld.so.conf.d/	-	0755	rm
ldap/	-	0755	rm
letsencrypt/	-	0755	rm
libblockdev/	-	0755	rm
libibverbs.d/	-	0755	rm
libnl-3/	-	0755	rm
libpaper.d/	-	0755	rm
lighttpd/	-	0755	rm
logcheck/	-	0755	rm
logrotate.d/	-	0755	rm
lvm/	-	0755	rm
mc/	-	0755	rm
mdadm/	-	0755	rm
ModemManager/	-	0755	rm
modprobe.d/	-	0755	rm
modules-load.d/	-	0755	rm
monit/	-	0755	rm
multipath/	-	0700	rm
mysql/	-	0755	rm
needrestart/	-	0755	rm
netplan/	-	0755	rm
network/	-	0755	rm
networkd-dispatcher/	-	0755	rm
NetworkManager/	-	0755	rm
newt/	-	0755	rm
nginx/	-	0755	rm
openmpi/	-	0755	rm
opt/	-	0755	rm
PackageKit/	-	0755	rm
pam.d/	-	0755	rm
perl/	-	0755	rm
php/	-	0755	rm
phpmyadmin/	-	0755	rm
pki/	-	0755	rm
pm/	-	0755	rm
polkit-1/	-	0755	rm
pollinate/	-	0755	rm
postfix/	-	0755	rm
postgresql-common/	-	0755	rm
ppp/	-	0755	rm
profile.d/	-	0755	rm
python2.7/	-	0755	rm
python3/	-	0755	rm
python3.10/	-	0755	rm
rc0.d/	-	0755	rm
rc1.d/	-	0755	rm
rc2.d/	-	0755	rm
rc3.d/	-	0755	rm
rc4.d/	-	0755	rm
rc5.d/	-	0755	rm
rc6.d/	-	0755	rm
rcS.d/	-	0755	rm
redis/	-	2770	rm
resolvconf/	-	0755	rm
rsyslog.d/	-	0755	rm
security/	-	0755	rm
selinux/	-	0755	rm
sensors.d/	-	0755	rm
skel/	-	0755	rm
sos/	-	0755	rm
ssh/	-	0755	rm
ssl/	-	0755	rm
sudoers.d/	-	0750	rm
sysctl.d/	-	0755	rm
systemd/	-	0755	rm
terminfo/	-	0755	rm
thermald/	-	0755	rm
tmpfiles.d/	-	0755	rm
ubuntu-advantage/	-	0755	rm
udev/	-	0755	rm
udisks2/	-	0755	rm
ufw/	-	0755	rm
update-manager/	-	0755	rm
update-motd.d/	-	0755	rm
update-notifier/	-	0755	rm
UPower/	-	0755	rm
usb_modeswitch.d/	-	0755	rm
usermin/	-	0755	rm
vim/	-	0755	rm
vmware-tools/	-	0755	rm
X11/	-	0755	rm
xdg/	-	0755	rm
.pwd.lock	0	0600	edit dl rm
adduser.conf	3028	0644	edit dl rm
aliases	51	0644	edit dl rm
aliases.db	12288	0644	edit dl rm
bash.bashrc	2319	0644	edit dl rm
bash_completion	45	0644	edit dl rm
bindresvport.blacklist	367	0644	edit dl rm
ca-certificates.conf	8756	0644	edit dl rm
ca-certificates.conf.dpkg-old	8182	0644	edit dl rm
crontab	1136	0644	edit dl rm
crypttab	54	0644	edit dl rm
debconf.conf	2969	0644	edit dl rm
debian_version	13	0644	edit dl rm
deluser.conf	604	0644	edit dl rm
e2scrub.conf	685	0644	edit dl rm
ec2_version	33	0644	edit dl rm
environment	106	0644	edit dl rm
ethertypes	1816	0644	edit dl rm
fstab	111	0644	edit dl rm
fstab.bak	84	0644	edit dl rm
fuse.conf	694	0644	edit dl rm
gai.conf	2584	0644	edit dl rm
group	948	0644	edit dl rm
group-	935	0644	edit dl rm
group.org	924	0644	edit dl rm
gshadow	782	0640	edit dl rm
gshadow-	772	0640	edit dl rm
hdparm.conf	4436	0644	edit dl rm
host.conf	92	0644	edit dl rm
hostname	8	0644	edit dl rm
hosts	541	0644	edit dl rm
hosts.allow	411	0644	edit dl rm
hosts.deny	711	0644	edit dl rm
inputrc	1748	0644	edit dl rm
issue	26	0644	edit dl rm
issue.net	19	0644	edit dl rm
kernel-img.conf	110	0644	edit dl rm
ld.so.cache	44896	0644	edit dl rm
ld.so.conf	34	0644	edit dl rm
legal	267	0644	edit dl rm
libaudit.conf	191	0644	edit dl rm
locale.alias	2996	0644	edit dl rm
locale.gen	9456	0644	edit dl rm
localtime	2262	0644	edit dl rm
login.defs	10734	0644	edit dl rm
logrotate.conf	592	0644	edit dl rm
lsb-release	104	0644	edit dl rm
machine-id	33	0444	edit dl rm
magic	111	0644	edit dl rm
magic.mime	111	0644	edit dl rm
mailcap	3733	0644	edit dl rm
mailcap.order	449	0644	edit dl rm
manpath.config	5217	0644	edit dl rm
mecabrc	288	0644	edit dl rm
mime.types	72029	0644	edit dl rm
mke2fs.conf	744	0644	edit dl rm
modules	195	0644	edit dl rm
mtab	0	0444	edit dl rm
multipath.conf	41	0644	edit dl rm
nanorc	11204	0644	edit dl rm
netconfig	767	0644	edit dl rm
networks	91	0644	edit dl rm
nftables.conf	228	0755	edit dl rm
nsswitch.conf	510	0644	edit dl rm
os-release	386	0644	edit dl rm
overlayroot.conf	6920	0644	edit dl rm
overlayroot.local.conf	112	0644	edit dl rm
pam.conf	552	0644	edit dl rm
papersize	3	0644	edit dl rm
passwd	2149	0644	edit dl rm
passwd-	2149	0644	edit dl rm
passwd.org	2090	0644	edit dl rm
profile	582	0644	edit dl rm
protocols	2932	0644	edit dl rm
resolv.conf	920	0644	edit dl rm
rmt	59976	0755	edit dl rm
rpc	887	0644	edit dl rm
rsyslog.conf	1382	0644	edit dl rm
screenrc	3663	0644	edit dl rm
sensors3.conf	10593	0644	edit dl rm
services	12813	0644	edit dl rm
shadow	1328	0640	edit dl rm
shadow-	1328	0640	edit dl rm
shadow.org	1410	0640	edit dl rm
shells	158	0644	edit dl rm
subgid	41	0644	edit dl rm
subgid-	65	0644	edit dl rm
subuid	41	0644	edit dl rm
subuid-	65	0644	edit dl rm
sudo.conf	4573	0644	edit dl rm
sudoers	1671	0440	edit dl rm
sudo_logsrvd.conf	9390	0644	edit dl rm
sysctl.conf	2355	0644	edit dl rm
sysctl.conf.dpkg-old	2393	0644	edit dl rm
sysctl.conf.save	2368	0644	edit dl rm
timezone	14	0644	edit dl rm
trafshow	1552	0644	edit dl rm
ucf.conf	1260	0644	edit dl rm
usb_modeswitch.conf	1523	0644	edit dl rm
vtrgb	158	0644	edit dl rm
wgetrc	4942	0644	edit dl rm
xattr.conf	681	0644	edit dl rm
zsh_command_not_found	460	0644	edit dl rm

Edit: /etc/sudo_logsrvd.conf (9390B)

#
# sudo logsrv daemon configuration
#

[server]
# The host name or IP address and port to listen on with an optional TLS
# flag.  If no port is specified, port 30343 will be used for plaintext
# connections and port 30344 will be used to TLS connections.
# The following forms are accepted:
#   listen_address = hostname(tls)
#   listen_address = hostname:port(tls)
#   listen_address = IPv4_address(tls)
#   listen_address = IPv4_address:port(tls)
#   listen_address = [IPv6_address](tls)
#   listen_address = [IPv6_address]:port(tls)
#
# The (tls) suffix should be omitted for plaintext connections.
#
# Multiple listen_address settings may be specified.
# The default is to listen on all addresses.
#listen_address = *:30343
#listen_address = *:30344(tls)

# The file containing the ID of the running sudo_logsrvd process.
#pid_file = /var/run/sudo/sudo_logsrvd.pid

# Where to log server warnings: none, stderr, syslog, or a path name.
#server_log = syslog

# If true, enable the SO_KEEPALIVE socket option on client connections.
# Defaults to true.
#tcp_keepalive = true

# The amount of time, in seconds, the server will wait for the client to
# respond.  A value of 0 will disable the timeout.  The default value is 30.
#timeout = 30

# If true, the server will validate its own certificate at startup.
# Defaults to true.
#tls_verify = true

# If true, client certificates will be validated by the server;
# clients without a valid certificate will be unable to connect.
# By default, client certs are not checked.
#tls_checkpeer = false

# Path to a certificate authority bundle file in PEM format to use
# instead of the system's default certificate authority database.
#tls_cacert = /etc/ssl/sudo/cacert.pem

# Path to the server's certificate file in PEM format.
# Required for TLS connections.
#tls_cert = /etc/ssl/sudo/certs/logsrvd_cert.pem

# Path to the server's private key file in PEM format.
# Required for TLS connections.
#tls_key = /etc/ssl/sudo/private/logsrvd_key.pem

# TLS cipher list (see "CIPHER LIST FORMAT" in the openssl-ciphers manual).
# NOTE that this setting is only effective if the negotiated protocol
# is TLS version 1.2.
# The default cipher list is HIGH:!aNULL.
#tls_ciphers_v12 = HIGH:!aNULL

# TLS cipher list if the negotiated protocol is TLS version 1.3.
# The default cipher list is TLS_AES_256_GCM_SHA384.
#tls_ciphers_v13 = TLS_AES_256_GCM_SHA384

# Path to the Diffie-Hellman parameter file in PEM format.
# If not set, the server will use the OpenSSL defaults.
#tls_dhparams = /etc/ssl/sudo/logsrvd_dhparams.pem

[relay]
# The host name or IP address and port to send logs to in relay mode.
# The syntax is identical to listen_address with the exception of
# the wild card ('*') syntax.  When this setting is enabled, logs will
# be relayed to the specified host instead of being stored locally.
# This setting is not enabled by default.
#relay_host = relayhost.dom.ain
#relay_host = relayhost.dom.ain(tls)

# The amount of time, in seconds, the server will wait for a connection
# to the relay server to complete.  A value of 0 will disable the timeout.
# The default value is 30.
#connect_timeout = 30

# The directory to store messages in before they are sent to the relay.
# Messages are stored in wire format.
# The default value is /var/log/sudo_logsrvd.
#relay_dir = /var/log/sudo_logsrvd

# The number of seconds to wait after a connection error before
# making a new attempt to forward a message to a relay host.
# The default value is 30.
#retry_interval = 30

# Whether to store the log before relaying it.  If true, enable store
# and forward mode.  If false, the client connection is immediately
# relayed.  Defaults to false.
#store_first = true

# If true, enable the SO_KEEPALIVE socket option on relay connections.
# Defaults to true.
#tcp_keepalive = true

# The amount of time, in seconds, the server will wait for the relay to
# respond.  A value of 0 will disable the timeout.  The default value is 30.
#timeout = 30

# If true, the server's relay certificate will be verified at startup.
# The default is to use the value in the [server] section.
#tls_verify = true

# Whether to verify the relay's certificate for TLS connections.
# The default is to use the value in the [server] section.
#tls_checkpeer = false

# Path to a certificate authority bundle file in PEM format to use
# instead of the system's default certificate authority database.
# The default is to use the value in the [server] section.
#tls_cacert = /etc/ssl/sudo/cacert.pem

# Path to the server's certificate file in PEM format.
# The default is to use the certificate in the [server] section.
#tls_cert = /etc/ssl/sudo/certs/logsrvd_cert.pem

# Path to the server's private key file in PEM format.
# The default is to use the key in the [server] section.
#tls_key = /etc/ssl/sudo/private/logsrvd_key.pem

# TLS cipher list (see "CIPHER LIST FORMAT" in the openssl-ciphers manual).
# NOTE that this setting is only effective if the negotiated protocol
# is TLS version 1.2.
# The default is to use the value in the [server] section.
#tls_ciphers_v12 = HIGH:!aNULL

# TLS cipher list if the negotiated protocol is TLS version 1.3.
# The default is to use the value in the [server] section.
#tls_ciphers_v13 = TLS_AES_256_GCM_SHA384

# Path to the Diffie-Hellman parameter file in PEM format.
# The default is to use the value in the [server] section.
#tls_dhparams = /etc/ssl/sudo/logsrvd_dhparams.pem

[iolog]
# The top-level directory to use when constructing the path name for the
# I/O log directory.  The session sequence number, if any, is stored here.
#iolog_dir = /var/log/sudo-io

# The path name, relative to iolog_dir, in which to store I/O logs.
# Note that iolog_file may contain directory components.
#iolog_file = %{seq}

# If set, I/O logs will be compressed using zlib.  Enabling compression can
# make it harder to view the logs in real-time as the program is executing.
#iolog_compress = false

# If set, I/O log data is flushed to disk after each write instead of
# buffering it.  This makes it possible to view the logs in real-time
# as the program is executing but reduces the effectiveness of compression.
#iolog_flush = true

# The group to use when creating new I/O log files and directories.
# If iolog_group is not set, the primary group-ID of the user specified
# by iolog_user is used.  If neither iolog_group nor iolog_user
# are set, I/O log files and directories are created with group-ID 0.
#iolog_group = wheel

# The user to use when setting the user-ID and group-ID of new I/O
# log files and directories.  If iolog_group is set, it will be used
# instead of the user's primary group-ID.  By default, I/O log files
# and directories are created with user and group-ID 0.
#iolog_user = root

# The file mode to use when creating I/O log files.  The file permissions
# will always include the owner read and write bits, even if they are
# not present in the specified mode.  When creating I/O log directories,
# search (execute) bits are added to match the read and write bits
# specified by iolog_mode.
#iolog_mode = 0600

# The maximum sequence number that will be substituted for the "%{seq}"
# escape in the I/O log file.  While the value substituted for "%{seq}"
# is in base 36, maxseq itself should be expressed in decimal.  Values
# larger than 2176782336 (which corresponds to the base 36 sequence
# number "ZZZZZZ") will be silently truncated to 2176782336.
#maxseq = 2176782336

[eventlog]
# Where to log accept, reject, exit, and alert events.
# Accepted values are syslog, logfile, or none.
# Defaults to syslog
#log_type = syslog

# Whether to log an event when a command exits or is terminated by a signal.
# Defaults to false
#log_exit = true

# Event log format.
# Supported log formats are "sudo" and "json"
# Defaults to sudo
#log_format = sudo

[syslog]
# The maximum length of a syslog payload.
# On many systems, syslog(3) has a relatively small log buffer.
# IETF RFC 5424 states that syslog servers must support messages
# of at least 480 bytes and should support messages up to 2048 bytes.
# Messages larger than this value will be split into multiple messages.
#maxlen = 960

# The syslog facility to use for event log messages.
# The following syslog facilities are supported: authpriv (if your OS
# supports it), auth, daemon, user, local0, local1, local2, local3,
# local4, local5, local6, and local7.
#facility = authpriv

# Syslog priority to use for event log accept messages, when the command
# is allowed by the security policy.  The following syslog priorities are
# supported: alert, crit, debug, emerg, err, info, notice, warning, none.
#accept_priority = notice

# Syslog priority to use for event log reject messages, when the command
# is not allowed by the security policy.
#reject_priority = alert

# Syslog priority to use for event log alert messages reported by the
# client.
#alert_priority = alert

# The syslog facility to use for server warning messages.
# Defaults to daemon.
#server_facility = daemon

[logfile]
# The path to the file-based event log.
# This path must be fully-qualified and start with a '/' character.
#path = /var/log/sudo

# The format string used when formatting the date and time for
# file-based event logs.  Formatting is performed via strftime(3) so
# any format string supported by that function is allowed.
#time_format = %h %e %T

cmd: