/
usr
/
share
/
doc
/
libintl-perl
/
examples
/
/usr/share/doc/libintl-perl/examples
mkdir
upload
Name
Size
Mode
Actions
simplecal/
-
0755
rm
README
20584
0644
edit
dl
rm
Edit:
/usr/share/doc/libintl-perl/examples/README
(20584B)
This is a simple, respectively stupid Perl package that shows how the complete internationalization process for a Perl package *could* be done. It does not claim to be the smartest or the only possible solution, but it provides at least a skeleton for real packages. If libintl-perl should someday become an "established" Perl package, it would probably be a lot better to seamlessly integrate the process into ExtUtils::MakeMaker, but for now it's all we have. The example focuses on the packaging process, i. e. on the things you have to do to maintain an internationalized Perl package, so that users of your package will benefit from translations you provide. It therefore doesn't make use of any of the nitty-gritty details of message translation like plural handling or the like. Requirements ------------ The only requirement is a Perl aware version of GNU gettext. Perl support was introduced only recently in GNU gettext, and you will have to check whether your copy of GNU gettext already supports Perl. Support for Perl was introduced in version 0.12.2 of GNU gettext. If your version is older, you have to update GNU gettext. First test ---------- The subdirectory "simplecal" contains a regular Perl package like the ones you will find on the CPAN. You should first try to build and use the package: cd simplecal perl Makefile.PL make If you see a warning that the prerequisite Locale::TextDomain is not found, then you have to install libintl-perl first. You should never "make install", the package is only a stupid example and you will not really want to install it. You can simply try it out from the installation directory itself: perl -Ilib bin/simplecal.pl It should print a crude calendar representation in English, or even in your preferred language, depending on your system settings. The Programming --------------- Now we should dig into the sources. All relevant files are commented and should give you a pretty good idea of what's going on. Change your directory to the package directory "simplecal" and inspect the source files. The heart of the library is found in the file lib/SimpleCal.pm. This Perl module defines functions that map numeric values to month names or abbreviated week day names. You will find nothing unusual in this module except for a line at the beginning of the file that reads: use Locale::TextDomain qw (com.cantanea.simplecal); In case you are not familiar with the operator "qw", this is an equivalent writing of use Locale::TextDomain ('com.cantanea.simplecal'); That line in the code does three things: It imports the module Locale::TextDomain, *and* it states that the text domain (or identifier) for this package is "com.cantanea.simplecal", *and* it says that the translations for this package can be found in the subdirectory "LocaleDate" of any component of @INC (unless it can be found in one of the system locations). See the POD in Locale::TextDomain for more information. You may also find out that some strings have a "__" or a "N__" in front of them. The explanation to these funny things has two sides: First, they mark the following strings as being translatable, so that the parser "xgettext" included in GNU gettext can find them. Yet, at runtime both "__" and "N__" are really function names, and they will look up their argument in the translation database. There is more documentation available on this. Guess where! Yepp, in the POD of Locale::TextDomain. The library is used by a Perl script "bin/simplecal.pl". Let's have a look at that script now. The first remarkable line is the one that calls POSIX::setlocale(): setlocale (LC_MESSAGES, ''); The POD of the POSIX module gives additional information on the function setlocale(). In brief, that call initializes the locale settings for the category "LC_MESSAGES" to the pre-selected user settings (this is indicated by the empty second argument). The constant LC_MESSAGES is exported by Locale::Messages, which is always a safe choice. If your script is only intended to run with Perl 5.8 or better, you can also import LC_MESSAGES from the POSIX module. The rest of the program only prints a calendar for the current month. It retrieves the name of the month and the abbreviated weekday names from our little SimpleCal.pm module which provides this information in a localized form. A Dutch Calendar ---------------- We want to see the calendar in Dutch now. All you have to do is to set the environment variable LANGUAGE to the value "nl". If you don't know how to do this, add the following line somewhere at the top of "bin/simplecal.pl": $ENV{LANGUAGE} = "nl"; Now run the script again: perl -Ilib bin/simplecal.pl It should print out the calendar in Dutch. Look at the *.po files in the subdirectory "po" for a list of other translations I have prepared. You can try them out in a similar manner. Please see the file "README-NLS" in subdirectory "sample/simplecal" for details on how to set the language via environment variables. The Subdirectory "po" --------------------- This directory contains the raw translations and a Makefile that will compile and install them. If you enter this directory and type "make" you will see a list of the available Makefile targets. The first one is the target "pot", a so-called phony target, i. e. it is not related to a file with the name of "pot". The command "make pot" will remake the master catalog of the package and place the result in the file "com.cantanea.simplecal.pot" ("com.cantanea.simplecal" is the text domain resp. identifier for our package). Type the command "make pot" now to see how the master catalog is actually generated. If the output says something like "nothing to be done for `pot'", then delete the file "com.cantanea.simplecal.pot" and try again. You should see now that the target file "com.cantanea.simplecal.pot" is generated by the program xgettext with a plethora of options: xgettext --output=./com.cantanea.simplecal.pox --from-code=utf-8 \ --add-comments=TRANSLATORS: --files-from=./POTFILES \ --copyright-holder="Imperia AG Huerth/Germany" \ --keyword --keyword='$__' --keyword=__ --keyword=__x \ --keyword=__n:1,2 --keyword=__nx:1,2 --keyword=__xn \ --keyword=N__ --language=perl && \ rm -f com.cantanea.simplecal.pot && \ mv com.cantanea.simplecal.pox com.cantanea.simplecal.pot Type "xgettext --help" for a detailled explanation of the command line options. In brief this invocation causes xgettext to read a list of files from the file "POTFILES", extract all messages from these source files and place the result in the output file "com.cantanea.simplecal.pox". If the command succeeds, the old ".pot" file is replaced by the new ".pox" file. Yes, this is complicated, and that is why this skeleton Makefile is provided here. You can copy it without any modification into your package to use it. The file POTFILES contains a list of source files to be scanned for translatable strings. Have a look at it, and you will understand it. The Makefile also includes a file called "PACKAGE". This file contains all package-dependent information in a couple of Makefile variables: - TEXTDOMAIN This Makefile variable should contain the text domain/identifier for your package. Please see the POD of Locale::TextDomain for advice on a reasonable naming. - LINGUAS The language codes of all languages supported by your package. Each entry corresponds to a po file in the po subdirectory. - COPYRIGHT_HOLDER Usually your name. Whatever you put here will be included as the copyright holder in the header of the po files. - MSGID_BUGS_ADDRESS Usually your name and e-mail address. It will also be included in the po header and translators will check this entry when they come across a bug in a msgid, or when they have difficulties to translate a certain message because of awkward coding on your side. Okay, after "make pot" we have updated the master message catalog TEXTDOMAIN.pot, in our case "com.cantanea.simplecal.pot". Have a look into the file now. It contains the original English messages that xgettext has extracted from our source files and blank translations. The po files (the files the names of which end with ".po") contain previous translations provided by our package translators. Whenever you change the Perl sources, the list of messages may change. This results in a maybe new .pot file and requires an update of all po files. Try that now and type "make update-po" You will see confusing output from "make" but you may get the idea that every single po file (every language that the package supports) gets updated, and the new strings are inserted into the po files. Since nothing really changed here (we did not change the source files yet) you can now try to update the compiled po files which end in ".gmo" (for GNU mo format) with "make update-mo". Again, you will see maybe cryptic output from "make" that signifies that all compiled files are re-generated now by a program called "msgfmt". The last step requires that you copy the (possibly changed) mo files into your package by "make install". This will copy the gmo files as ".mo" files into the subdirectory "LocaleData" of your package so that libintl-perl is able to find them at runtime. You can perform all these steps at once by typing "make all" although this is mostly useful for testing purposes. In reality the workflow is different: - You change your source files, messages may have been added, deleted or modified. You will have to update the master message catalog by typing "make pot". - Since the translations may have gotten out-of-date, you will have to merge your changes into all po files by "make update-po". - Your translators will get copies of the po files, reflect your changes in the po files and send them back to you. - When you have received the updates, it is time to compile the po files into a binary representation with "make update-mo". - These binary mo files have to be installed under "LocaleData", and you have to "make install". Note that "make install" installs the mo files in your source package, not in the system location! - Now that you have updated the translations for your package, you will want to upload a new version to the CPAN. Note that all these steps are *only* necessary for package maintainers. As a user of the package, you will only see the resulting mo files under "LocaleData". End users do *not* need any of the gettext tools, and they do not have to perform any of the above steps theirselves! Changing the Sources -------------------- You may wonder whether your translators have to re-translate everything from scratch whenever you change your Perl sources. This is, of course, not the case. Let's say, you want to add a welcome and a good-bye message to the program output. Have a look into "bin/simplecal.pl" and you will see that this is already prepared but commented out (search for "Welcome to" and "Bye" if you can't find it). Uncomment these lines and see what happens to the po files in that case. Before you proceed, you should have a look at the Dutch translation file "nl.po". At the bottom you will find some lines that are commented out with "#~" and that proove that I have already prepared that case. The comment sign "#~" in po files signifies that a particular translation is obsoleted, i. e. no longer needed because it is no longer present in the source files. Say, that you have really changed your mind, and you want to re-introduce the welcome and good-bye messages to your program and you uncomment the corresponding lines in "bin/simplecal.pl". You will have to re-make the master catalog "com.cantanea.simplecal.pot" by "make pot", and then "make update-po" to update the po files. In fact, "make update-po" is sufficient because it will also update the pot file if it is out-of-date (i. e. if any of the source files have changed in the meantime). Type "make update-po" now, and look again at "po/nl.po". You will see that the previously translated welcome and good-bye messages have been re-activated from the obsoleted entries. In fact your translators will have nothing to do, because their old translations are still valid. Type "make install" and then re-run "perl -Ilib bin/simplecal.pl", set the environment variable "LANG" to any of the available languages, and things will still work perfectly. Of course, it is a rare case that messages are discarded and later re-activated in programming sources. It is more likely that you will modify a message, or maybe add a message that is similar to former ones. Let's say that you want to change the exclamation mark in the good-bye message at the bottom of the script to a simple full stop. Look for the line that reads print __"Bye!\n"; and change it into print __"Bye.\n"; Change into the directory "po", update the translation files with "make update-po" and inspect the file "nl.po". At first glance, you may not see any change. But then: The entry for the good-bye message has an additional comment "#, fuzzy". The fuzzy mark signifies that the msgerge program has found that a message is very similar to a previous message (even obsoleted ones are taken into account), and that it proposes an old translation here. The translator will normally modify the translation accordingly (without having to re-type everything), remove the fuzzy mark and send back the translation to you. In fact you could also install translations that have not been revised by the translator and are still marked as fuzzy. This is not recommended however! The algorithm used in msgmerge is quite smart and seldom fails to detect minimal changes in the source message and propose the old translation. However, it often proposes translations from other valid or obsoleted entries that are only vaguely related to the real meaning. You should understand the fuzzy merging mechanism as a helpful feature to the translator only and never install fuzzy translations unless you absolutely know what you are doing. Pass Comments to Translators ---------------------------- The po files contain references for every message to the corresponding source files as comments. But you still may feel a need for giving hints to the translators. You may want to tell the translators, that the good-bye message can be somewhat sloppy (or whatever you like). This is simple to do. Have a look at the good-bye message in "bin/simplecal.pl" and you will see that it is preceded by a comment introduced with the string "TRANSLATORS:". If you start your Perl comment like this, it will end up as a comment for translators in the resulting po (resp. pot) file and may serve as a hint for translators. In fact, the string "TRANSLATORS:" is arbitrarily chosen. If you prefer another string, change it in the invocation of "xgettext" in the skeleton Makefile provided here. Informational Files ------------------- You should put two additional files in your distribution. The first one is "README-NLS". It should be a verbatim copy of the most recent version found in the "simplecal" sample package. Please send corrections or improvements to this file to the maintainer Guido Flohr <guido.flohr@cantanea.com>, and add package-specific notes to your documentation instead. Users expect this file to have a standard contents, and they will not check it for changes on a regular basis. The file "TRANSLATIONS" should reflect the current translation status of your package. It should list all currently availabe translations, their completeness, and it should also inform your user which translations are actively maintained, and which are not. You can find a sample in the "simplecal" sample package. Bringing It All Together ------------------------ The above sounds definitely more complicated than it is. In practice you code as before but mark all your strings with "__" and friends like described in the POD of Locale::TextDomain. Before a new release you change into the directory "po" of your distribution and type "make update-po" to update the available translations. Distribute the modified po files to your translators, and once you have collected them all, type "make install" to add them to your distribution. That's all, all translations will be available in your package now. Internationalizing Existing Packages ------------------------------------ Internationalizing an already existing package with libintl-perl is less painful than you think. The following roadmap should do it with minimal effort. First create a subdirectory "po" in your sources, copy the "Makefile" from this sample, and copy and edit the files "TEXTDOMAIN" and "LINGUAS" (LINGUAS can set the Makefile variable "LINGUAS" to the empty string and TEXTDOMAIN should set "TEXTDOMAIN" to a name as advised in the POD of Locale::TextDomain). Next you have to mark the translatable strings in your sources with "__" and friends. You can do that by hand, but isn't that the kind of job that you have bought a computer for? List your source files in "po/POTFILES" and then try xgettext -a --files-from=POTFILES -o all.pot The option "-a" instructs xgettext to extract *all* strings from your sources. This option may miss a few strings (consider a bug report in that case), it will issue a lot of warnings about "illegal variable interpolations" (see the POD of Locale::TextDomain for workarounds) and will put a lot of strings extracted from your sources into the file "all.pot". Now, load the file "all.pot" into an editor of your choice. If your choice is "GNU emacs" you will have maximum comfort: Select an entry, type "s" and you can cycle through the source files that this particular entry originates from. Other PO editors like KBabel or PO-Edit provide similar functionality. But even with the "Notepad" on MS-DOS you will be able to navigate to the corresponding source file. Once you have found the origin in your sources, you have to decide whether this is a false positive, and you simply ignore it. If it is a translatable string you either simply mark it with "__" or you "repair" it. What does "repair" mean? Again, the POD of Locale::TextDomain... In brief: Your Perl sources will be full of stuff like: die "Cannot open file '$filename': $!\n"; This string is not suitable for translation, because it is not constant. It may change depending on the value of the variable $filename and the value of $!. You will have to change that into something like: die __x ("Cannot open file '{filename}': {err}\n", filename => $filename, err => $err); Once you are done with marking the strings, you can try to run your scripts/modules and you will see a lot of complaints by Perl that it doesn't know about "__" (in various incarnations). Remember that "__" is really a function call and you have to import the function "__" and its relatives into your namespace. What you have to do is to invent an identifier for your package (see Locale::TextDomain for hints) and then add the following line to all of your source files that produced errors: use Locale::TextDomain ('Name-Of-My-Package'); You will be happy if "Name-Of-My-Package" is the same as the Makefile variable "TEXTDOMAIN" in the file "po/TEXTDOMAIN" that you have created in the beginning. For the common case of a pure library: Is that really all I have to do? Yes! What about POSIX::setlocale(), don't I have to make a call somewhere? No, not for a library! And what about calls to textdomain() and bindtextdomain() that I know from C or other languages? No, this is all hidden in "use TextDomain (PACKAGENAME)" for Perl. To make it clear again: A library should NEVER change the locale settings. The script that uses a library (or multiple libraries) should do that, and this boils down to three lines of Perl: use POSIX qw (setlocale); use Locale::Messages (LC_MESSAGES); setlocale (LC_MESSAGES, ""); That means: The *calling* Perl script, the one that uses possibly internationalized libraries, should initialize the locale settings to the user preferences. Libraries should honor that setting but should never change it. If a script misses a call to setlocale(), your internationalized library will happily continue to work flawlessly with the original English messages, it is up to the client programmer to reveal the i18n features in your code! Good luck! Guido
Save
cmd:
run