FM / asm

/usr/src/linux-headers-5.15.0-181/arch/m68k/include/asm/

/usr/src/linux-headers-5.15.0-181/arch/m68k/include/asm

Name	Size	Mode	Actions
adb_iop.h	1188	0644	edit dl rm
amigahw.h	10737	0644	edit dl rm
amigaints.h	3583	0644	edit dl rm
amigayle.h	3271	0644	edit dl rm
amipcmcia.h	2568	0644	edit dl rm
apollohw.h	2410	0644	edit dl rm
asm-offsets.h	35	0644	edit dl rm
asm-prototypes.h	211	0644	edit dl rm
atarihw.h	20919	0644	edit dl rm
atariints.h	5691	0644	edit dl rm
atarikb.h	1434	0644	edit dl rm
atari_joystick.h	457	0644	edit dl rm
atari_stdma.h	514	0644	edit dl rm
atari_stram.h	528	0644	edit dl rm
atomic.h	5016	0644	edit dl rm
bitops.h	12827	0644	edit dl rm
blinken.h	641	0644	edit dl rm
bootinfo.h	783	0644	edit dl rm
bootstd.h	4747	0644	edit dl rm
bug.h	659	0644	edit dl rm
bvme6000hw.h	3529	0644	edit dl rm
cache.h	296	0644	edit dl rm
cacheflush.h	133	0644	edit dl rm
cacheflush_mm.h	7173	0644	edit dl rm
cacheflush_no.h	1884	0644	edit dl rm
checksum.h	3497	0644	edit dl rm
cmpxchg.h	3189	0644	edit dl rm
coldfire.h	1653	0644	edit dl rm
contregs.h	3390	0644	edit dl rm
current.h	580	0644	edit dl rm
delay.h	3504	0644	edit dl rm
div64.h	858	0644	edit dl rm
dma.h	17040	0644	edit dl rm
dsp56k.h	1269	0644	edit dl rm
dvma.h	9903	0644	edit dl rm
elf.h	3145	0644	edit dl rm
entry.h	5902	0644	edit dl rm
export.h	53	0644	edit dl rm
fb.h	921	0644	edit dl rm
fbio.h	10106	0644	edit dl rm
flat.h	333	0644	edit dl rm
floppy.h	5330	0644	edit dl rm
fpu.h	535	0644	edit dl rm
ftrace.h	12	0644	edit dl rm
gpio.h	2294	0644	edit dl rm
hash.h	2115	0644	edit dl rm
hp300hw.h	186	0644	edit dl rm
hwtest.h	467	0644	edit dl rm
ide.h	1708	0644	edit dl rm
idprom.h	725	0644	edit dl rm
intersil.h	1134	0644	edit dl rm
io.h	244	0644	edit dl rm
io_mm.h	13198	0644	edit dl rm
io_no.h	4196	0644	edit dl rm
irq.h	2634	0644	edit dl rm
irqflags.h	1652	0644	edit dl rm
Kbuild	165	0644	edit dl rm
kexec.h	732	0644	edit dl rm
kmap.h	1754	0644	edit dl rm
linkage.h	1583	0644	edit dl rm
m52xxacr.h	3660	0644	edit dl rm
m53xxacr.h	3683	0644	edit dl rm
m53xxsim.h	55262	0644	edit dl rm
m54xxacr.h	4934	0644	edit dl rm
m54xxgpt.h	3750	0644	edit dl rm
m54xxpci.h	6276	0644	edit dl rm
m54xxsim.h	3892	0644	edit dl rm
m520xsim.h	7323	0644	edit dl rm
m523xsim.h	7882	0644	edit dl rm
m525xsim.h	10822	0644	edit dl rm
m527xsim.h	13835	0644	edit dl rm
m528xsim.h	9599	0644	edit dl rm
m5206sim.h	6555	0644	edit dl rm
m5272sim.h	6199	0644	edit dl rm
m5307sim.h	7698	0644	edit dl rm
m5407sim.h	6289	0644	edit dl rm
m5441xsim.h	10294	0644	edit dl rm
machdep.h	1331	0644	edit dl rm
machines.h	3209	0644	edit dl rm
machw.h	588	0644	edit dl rm
macintosh.h	2438	0644	edit dl rm
macints.h	3210	0644	edit dl rm
mac_asc.h	520	0644	edit dl rm
mac_baboon.h	999	0644	edit dl rm
mac_iop.h	5499	0644	edit dl rm
mac_oss.h	1873	0644	edit dl rm
mac_psc.h	7427	0644	edit dl rm
mac_via.h	11718	0644	edit dl rm
math-emu.h	6897	0644	edit dl rm
MC68EZ328.h	38650	0644	edit dl rm
MC68VZ328.h	42006	0644	edit dl rm
MC68328.h	38724	0644	edit dl rm
mc146818rtc.h	598	0644	edit dl rm
mcf8390.h	3844	0644	edit dl rm
mcfclk.h	961	0644	edit dl rm
mcfdma.h	6662	0644	edit dl rm
mcfgpio.h	8269	0644	edit dl rm
mcfintc.h	3161	0644	edit dl rm
mcfmmu.h	3761	0644	edit dl rm
mcfpit.h	2278	0644	edit dl rm
mcfqspi.h	1466	0644	edit dl rm
mcfsim.h	1531	0644	edit dl rm
mcfslt.h	1240	0644	edit dl rm
mcftimer.h	2357	0644	edit dl rm
mcfuart.h	7076	0644	edit dl rm
mcfwdebug.h	5106	0644	edit dl rm
mcf_pgalloc.h	2000	0644	edit dl rm
mcf_pgtable.h	8312	0644	edit dl rm
mmu.h	243	0644	edit dl rm
mmu_context.h	7207	0644	edit dl rm
module.h	847	0644	edit dl rm
module.lds.h	91	0644	edit dl rm
motorola_pgalloc.h	2146	0644	edit dl rm
motorola_pgtable.h	7610	0644	edit dl rm
movs.h	1472	0644	edit dl rm
mvme16xhw.h	2216	0644	edit dl rm
mvme147hw.h	2938	0644	edit dl rm
natfeat.h	533	0644	edit dl rm
nettel.h	3023	0644	edit dl rm
nubus.h	1262	0644	edit dl rm
openprom.h	8173	0644	edit dl rm
oplib.h	9768	0644	edit dl rm
page.h	1728	0644	edit dl rm
page_mm.h	3399	0644	edit dl rm
page_no.h	1322	0644	edit dl rm
page_offset.h	256	0644	edit dl rm
parport.h	837	0644	edit dl rm
pci.h	258	0644	edit dl rm
pgalloc.h	444	0644	edit dl rm
pgtable.h	127	0644	edit dl rm
pgtable_mm.h	4931	0644	edit dl rm
pgtable_no.h	1438	0644	edit dl rm
processor.h	4158	0644	edit dl rm
ptrace.h	643	0644	edit dl rm
q40ints.h	749	0644	edit dl rm
q40_master.h	2357	0644	edit dl rm
quicc_simple.h	1830	0644	edit dl rm
raw_io.h	12003	0644	edit dl rm
serial.h	1165	0644	edit dl rm
setup.h	9467	0644	edit dl rm
signal.h	1377	0644	edit dl rm
smp.h	32	0644	edit dl rm
string.h	1717	0644	edit dl rm
sun3-head.h	353	0644	edit dl rm
sun3ints.h	989	0644	edit dl rm
sun3mmu.h	5025	0644	edit dl rm
sun3x.h	868	0644	edit dl rm
sun3xflop.h	5757	0644	edit dl rm
sun3xprom.h	1343	0644	edit dl rm
sun3_pgalloc.h	1267	0644	edit dl rm
sun3_pgtable.h	6583	0644	edit dl rm
switch_to.h	1549	0644	edit dl rm
syscall.h	251	0644	edit dl rm
thread_info.h	2237	0644	edit dl rm
timex.h	974	0644	edit dl rm
tlb.h	135	0644	edit dl rm
tlbflush.h	5989	0644	edit dl rm
traps.h	8615	0644	edit dl rm
uaccess.h	12563	0644	edit dl rm
ucontext.h	570	0644	edit dl rm
unistd.h	993	0644	edit dl rm
user.h	3874	0644	edit dl rm
vga.h	902	0644	edit dl rm
virtconvert.h	834	0644	edit dl rm
vmalloc.h	90	0644	edit dl rm
zorro.h	1222	0644	edit dl rm

Edit: /usr/src/linux-headers-5.15.0-181/arch/m68k/include/asm/m525xsim.h (10822B)

/* SPDX-License-Identifier: GPL-2.0 */
/****************************************************************************/

/*
 *	m525xsim.h -- ColdFire 525x System Integration Module support.
 *
 *	(C) Copyright 2012, Steven king <sfking@fdwdc.com>
 *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
 */

/****************************************************************************/
#ifndef	m525xsim_h
#define m525xsim_h
/****************************************************************************/

/*
 *	This header supports ColdFire 5249, 5251 and 5253. There are a few
 *	little differences between them, but most of the peripheral support
 *	can be used by all of them.
 */
#define CPU_NAME		"COLDFIRE(m525x)"
#define CPU_INSTR_PER_JIFFY	3
#define MCF_BUSCLK		(MCF_CLK / 2)

#include <asm/m52xxacr.h>

/*
 *	The 525x has a second MBAR region, define its address.
 */
#define MCF_MBAR2		0x80000000

/*
 *	Define the 525x SIM register set addresses.
 */
#define MCFSIM_RSR		(MCF_MBAR + 0x00)	/* Reset Status */
#define MCFSIM_SYPCR		(MCF_MBAR + 0x01)	/* System Protection */
#define MCFSIM_SWIVR		(MCF_MBAR + 0x02)	/* SW Watchdog intr */
#define MCFSIM_SWSR		(MCF_MBAR + 0x03)	/* SW Watchdog srv */
#define MCFSIM_MPARK		(MCF_MBAR + 0x0C)	/* BUS Master Ctrl */
#define MCFSIM_IPR		(MCF_MBAR + 0x40)	/* Interrupt Pending */
#define MCFSIM_IMR		(MCF_MBAR + 0x44)	/* Interrupt Mask */
#define MCFSIM_ICR0		(MCF_MBAR + 0x4c)	/* Intr Ctrl reg 0 */
#define MCFSIM_ICR1		(MCF_MBAR + 0x4d)	/* Intr Ctrl reg 1 */
#define MCFSIM_ICR2		(MCF_MBAR + 0x4e)	/* Intr Ctrl reg 2 */
#define MCFSIM_ICR3		(MCF_MBAR + 0x4f)	/* Intr Ctrl reg 3 */
#define MCFSIM_ICR4		(MCF_MBAR + 0x50)	/* Intr Ctrl reg 4 */
#define MCFSIM_ICR5		(MCF_MBAR + 0x51)	/* Intr Ctrl reg 5 */
#define MCFSIM_ICR6		(MCF_MBAR + 0x52)	/* Intr Ctrl reg 6 */
#define MCFSIM_ICR7		(MCF_MBAR + 0x53)	/* Intr Ctrl reg 7 */
#define MCFSIM_ICR8		(MCF_MBAR + 0x54)	/* Intr Ctrl reg 8 */
#define MCFSIM_ICR9		(MCF_MBAR + 0x55)	/* Intr Ctrl reg 9 */
#define MCFSIM_ICR10		(MCF_MBAR + 0x56)	/* Intr Ctrl reg 10 */
#define MCFSIM_ICR11		(MCF_MBAR + 0x57)	/* Intr Ctrl reg 11 */

#define MCFSIM_CSAR0		(MCF_MBAR + 0x80)	/* CS 0 Address reg */
#define MCFSIM_CSMR0		(MCF_MBAR + 0x84)	/* CS 0 Mask reg */
#define MCFSIM_CSCR0		(MCF_MBAR + 0x8a)	/* CS 0 Control reg */
#define MCFSIM_CSAR1		(MCF_MBAR + 0x8c)	/* CS 1 Address reg */
#define MCFSIM_CSMR1		(MCF_MBAR + 0x90)	/* CS 1 Mask reg */
#define MCFSIM_CSCR1		(MCF_MBAR + 0x96)	/* CS 1 Control reg */
#define MCFSIM_CSAR2		(MCF_MBAR + 0x98)	/* CS 2 Address reg */
#define MCFSIM_CSMR2		(MCF_MBAR + 0x9c)	/* CS 2 Mask reg */
#define MCFSIM_CSCR2		(MCF_MBAR + 0xa2)	/* CS 2 Control reg */
#define MCFSIM_CSAR3		(MCF_MBAR + 0xa4)	/* CS 3 Address reg */
#define MCFSIM_CSMR3		(MCF_MBAR + 0xa8)	/* CS 3 Mask reg */
#define MCFSIM_CSCR3		(MCF_MBAR + 0xae)	/* CS 3 Control reg */
#define MCFSIM_CSAR4		(MCF_MBAR + 0xb0)	/* CS 4 Address reg */
#define MCFSIM_CSMR4		(MCF_MBAR + 0xb4)	/* CS 4 Mask reg */
#define MCFSIM_CSCR4		(MCF_MBAR + 0xba)	/* CS 4 Control reg */

#define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
#define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM 0 Addr/Ctrl */
#define MCFSIM_DMR0		(MCF_MBAR + 0x10c)	/* DRAM 0 Mask */
#define MCFSIM_DACR1		(MCF_MBAR + 0x110)	/* DRAM 1 Addr/Ctrl */
#define MCFSIM_DMR1		(MCF_MBAR + 0x114)	/* DRAM 1 Mask */

/*
 * Secondary Interrupt Controller (in MBAR2)
*/
#define MCFINTC2_INTBASE	(MCF_MBAR2 + 0x168)	/* Base Vector Reg */
#define MCFINTC2_INTPRI1	(MCF_MBAR2 + 0x140)	/* 0-7 priority */
#define MCFINTC2_INTPRI2	(MCF_MBAR2 + 0x144)	/* 8-15 priority */
#define MCFINTC2_INTPRI3	(MCF_MBAR2 + 0x148)	/* 16-23 priority */
#define MCFINTC2_INTPRI4	(MCF_MBAR2 + 0x14c)	/* 24-31 priority */
#define MCFINTC2_INTPRI5	(MCF_MBAR2 + 0x150)	/* 32-39 priority */
#define MCFINTC2_INTPRI6	(MCF_MBAR2 + 0x154)	/* 40-47 priority */
#define MCFINTC2_INTPRI7	(MCF_MBAR2 + 0x158)	/* 48-55 priority */
#define MCFINTC2_INTPRI8	(MCF_MBAR2 + 0x15c)	/* 56-63 priority */

#define MCFINTC2_INTPRI_REG(i)	(MCFINTC2_INTPRI1 + \
				((((i) - MCFINTC2_VECBASE) / 8) * 4))
#define MCFINTC2_INTPRI_BITS(b, i)	((b) << (((i) % 8) * 4))

/*
 *	Timer module.
 */
#define MCFTIMER_BASE1		(MCF_MBAR + 0x140)	/* Base of TIMER1 */
#define MCFTIMER_BASE2		(MCF_MBAR + 0x180)	/* Base of TIMER2 */

/*
 *	UART module.
 */
#define MCFUART_BASE0		(MCF_MBAR + 0x1c0)	/* Base address UART0 */
#define MCFUART_BASE1		(MCF_MBAR + 0x200)	/* Base address UART1 */

/*
 *	QSPI module.
 */
#define MCFQSPI_BASE		(MCF_MBAR + 0x400)	/* Base address QSPI */
#define MCFQSPI_SIZE		0x40			/* Register set size */

#ifdef CONFIG_M5249
#define MCFQSPI_CS0		29
#define MCFQSPI_CS1		24
#define MCFQSPI_CS2		21
#define MCFQSPI_CS3		22
#else
#define MCFQSPI_CS0		15
#define MCFQSPI_CS1		16
#define MCFQSPI_CS2		24
#define MCFQSPI_CS3		28
#endif

/*
 *	I2C module.
 */
#define MCFI2C_BASE0		(MCF_MBAR + 0x280)	/* Base address I2C0 */
#define MCFI2C_SIZE0		0x20			/* Register set size */

#define MCFI2C_BASE1		(MCF_MBAR2 + 0x440)	/* Base address I2C1 */
#define MCFI2C_SIZE1		0x20			/* Register set size */

/*
 *	DMA unit base addresses.
 */
#define MCFDMA_BASE0		(MCF_MBAR + 0x300)	/* Base address DMA 0 */
#define MCFDMA_BASE1		(MCF_MBAR + 0x340)	/* Base address DMA 1 */
#define MCFDMA_BASE2		(MCF_MBAR + 0x380)	/* Base address DMA 2 */
#define MCFDMA_BASE3		(MCF_MBAR + 0x3C0)	/* Base address DMA 3 */

/*
 *	Some symbol defines for the above...
 */
#define MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
#define MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
#define MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
#define MCFSIM_I2CICR		MCFSIM_ICR3	/* I2C ICR */
#define MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
#define MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
#define MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
#define MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
#define MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
#define MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
#define MCFSIM_QSPIICR		MCFSIM_ICR10	/* QSPI ICR */

/*
 *	Define system peripheral IRQ usage.
 */
#define MCF_IRQ_QSPI		28		/* QSPI, Level 4 */
#define MCF_IRQ_I2C0		29
#define MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
#define MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */

#define MCF_IRQ_UART0		73		/* UART0 */
#define MCF_IRQ_UART1		74		/* UART1 */

/*
 * Define the base interrupt for the second interrupt controller.
 * We set it to 128, out of the way of the base interrupts, and plenty
 * of room for its 64 interrupts.
 */
#define MCFINTC2_VECBASE	128

#define MCF_IRQ_GPIO0		(MCFINTC2_VECBASE + 32)
#define MCF_IRQ_GPIO1		(MCFINTC2_VECBASE + 33)
#define MCF_IRQ_GPIO2		(MCFINTC2_VECBASE + 34)
#define MCF_IRQ_GPIO3		(MCFINTC2_VECBASE + 35)
#define MCF_IRQ_GPIO4		(MCFINTC2_VECBASE + 36)
#define MCF_IRQ_GPIO5		(MCFINTC2_VECBASE + 37)
#define MCF_IRQ_GPIO6		(MCFINTC2_VECBASE + 38)
#define MCF_IRQ_GPIO7		(MCFINTC2_VECBASE + 39)

#define MCF_IRQ_USBWUP		(MCFINTC2_VECBASE + 40)
#define MCF_IRQ_I2C1		(MCFINTC2_VECBASE + 62)

/*
 *	General purpose IO registers (in MBAR2).
 */
#define MCFSIM2_GPIOREAD	(MCF_MBAR2 + 0x000)	/* GPIO read values */
#define MCFSIM2_GPIOWRITE	(MCF_MBAR2 + 0x004)	/* GPIO write values */
#define MCFSIM2_GPIOENABLE	(MCF_MBAR2 + 0x008)	/* GPIO enabled */
#define MCFSIM2_GPIOFUNC	(MCF_MBAR2 + 0x00C)	/* GPIO function */
#define MCFSIM2_GPIO1READ	(MCF_MBAR2 + 0x0B0)	/* GPIO1 read values */
#define MCFSIM2_GPIO1WRITE	(MCF_MBAR2 + 0x0B4)	/* GPIO1 write values */
#define MCFSIM2_GPIO1ENABLE	(MCF_MBAR2 + 0x0B8)	/* GPIO1 enabled */
#define MCFSIM2_GPIO1FUNC	(MCF_MBAR2 + 0x0BC)	/* GPIO1 function */

#define MCFSIM2_GPIOINTSTAT	(MCF_MBAR2 + 0xc0)	/* GPIO intr status */
#define MCFSIM2_GPIOINTCLEAR	(MCF_MBAR2 + 0xc0)	/* GPIO intr clear */
#define MCFSIM2_GPIOINTENABLE	(MCF_MBAR2 + 0xc4)	/* GPIO intr enable */

#define MCFSIM2_DMAROUTE	(MCF_MBAR2 + 0x188)     /* DMA routing */
#define MCFSIM2_IDECONFIG1	(MCF_MBAR2 + 0x18c)	/* IDEconfig1 */
#define MCFSIM2_IDECONFIG2	(MCF_MBAR2 + 0x190)	/* IDEconfig2 */

/*
 * Generic GPIO support
 */
#define MCFGPIO_PIN_MAX		64
#ifdef CONFIG_M5249
#define MCFGPIO_IRQ_MAX		-1
#define MCFGPIO_IRQ_VECBASE	-1
#else
#define MCFGPIO_IRQ_MAX		7
#define MCFGPIO_IRQ_VECBASE	MCF_IRQ_GPIO0
#endif

/****************************************************************************/

#ifdef __ASSEMBLER__
#ifdef CONFIG_M5249C3
/*
 *	The M5249C3 board needs a little help getting all its SIM devices
 *	initialized at kernel start time. dBUG doesn't set much up, so
 *	we need to do it manually.
 */
.macro m5249c3_setup
	/*
	 *	Set MBAR1 and MBAR2, just incase they are not set.
	 */
	movel	#0x10000001,%a0
	movec	%a0,%MBAR			/* map MBAR region */
	subql	#1,%a0				/* get MBAR address in a0 */

movel	#0x80000001,%a1
	movec	%a1,#3086			/* map MBAR2 region */
	subql	#1,%a1				/* get MBAR2 address in a1 */

/*
	 *      Move secondary interrupts to their base (128).
	 */
	moveb	#MCFINTC2_VECBASE,%d0
	moveb	%d0,0x16b(%a1)			/* interrupt base register */

/*
	 *      Work around broken CSMR0/DRAM vector problem.
	 */
	movel	#0x001F0021,%d0			/* disable C/I bit */
	movel	%d0,0x84(%a0)			/* set CSMR0 */

/*
	 *	Disable the PLL firstly. (Who knows what state it is
	 *	in here!).
	 */
	movel	0x180(%a1),%d0			/* get current PLL value */
	andl	#0xfffffffe,%d0			/* PLL bypass first */
	movel	%d0,0x180(%a1)			/* set PLL register */
	nop

#if CONFIG_CLOCK_FREQ == 140000000
	/*
	 *	Set initial clock frequency. This assumes M5249C3 board
	 *	is fitted with 11.2896MHz crystal. It will program the
	 *	PLL for 140MHz. Lets go fast :-)
	 */
	movel	#0x125a40f0,%d0			/* set for 140MHz */
	movel	%d0,0x180(%a1)			/* set PLL register */
	orl	#0x1,%d0
	movel	%d0,0x180(%a1)			/* set PLL register */
#endif

/*
	 *	Setup CS1 for ethernet controller.
	 *	(Setup as per M5249C3 doco).
	 */
	movel  #0xe0000000,%d0			/* CS1 mapped at 0xe0000000 */
	movel  %d0,0x8c(%a0)
	movel  #0x001f0021,%d0			/* CS1 size of 1Mb */
	movel  %d0,0x90(%a0)
	movew  #0x0080,%d0			/* CS1 = 16bit port, AA */
	movew  %d0,0x96(%a0)

/*
	 *	Setup CS2 for IDE interface.
	 */
	movel	#0x50000000,%d0			/* CS2 mapped at 0x50000000 */
	movel	%d0,0x98(%a0)
	movel	#0x001f0001,%d0			/* CS2 size of 1MB */
	movel	%d0,0x9c(%a0)
	movew	#0x0080,%d0			/* CS2 = 16bit, TA */
	movew	%d0,0xa2(%a0)

movel	#0x00107000,%d0			/* IDEconfig1 */
	movel	%d0,0x18c(%a1)
	movel	#0x000c0400,%d0			/* IDEconfig2 */
	movel	%d0,0x190(%a1)

movel	#0x00080000,%d0			/* GPIO19, IDE reset bit */
	orl	%d0,0xc(%a1)			/* function GPIO19 */
	orl	%d0,0x8(%a1)			/* enable GPIO19 as output */
        orl	%d0,0x4(%a1)			/* de-assert IDE reset */
.endm

#define	PLATFORM_SETUP	m5249c3_setup

#endif /* CONFIG_M5249C3 */
#endif /* __ASSEMBLER__ */
/****************************************************************************/
#endif	/* m525xsim_h */

cmd: