FM / asm

/usr/src/linux-headers-5.15.0-181/arch/mips/include/asm/

/usr/src/linux-headers-5.15.0-181/arch/mips/include/asm

Name	Size	Mode	Actions
dec/	-	0755	rm
fw/	-	0755	rm
ip32/	-	0755	rm
mach-ar7/	-	0755	rm
mach-ath25/	-	0755	rm
mach-ath79/	-	0755	rm
mach-au1x00/	-	0755	rm
mach-bcm47xx/	-	0755	rm
mach-bcm63xx/	-	0755	rm
mach-bmips/	-	0755	rm
mach-cavium-octeon/	-	0755	rm
mach-cobalt/	-	0755	rm
mach-db1x00/	-	0755	rm
mach-dec/	-	0755	rm
mach-generic/	-	0755	rm
mach-ingenic/	-	0755	rm
mach-ip22/	-	0755	rm
mach-ip27/	-	0755	rm
mach-ip28/	-	0755	rm
mach-ip30/	-	0755	rm
mach-ip32/	-	0755	rm
mach-jazz/	-	0755	rm
mach-lantiq/	-	0755	rm
mach-loongson2ef/	-	0755	rm
mach-loongson32/	-	0755	rm
mach-loongson64/	-	0755	rm
mach-malta/	-	0755	rm
mach-n64/	-	0755	rm
mach-netlogic/	-	0755	rm
mach-pic32/	-	0755	rm
mach-ralink/	-	0755	rm
mach-rc32434/	-	0755	rm
mach-rm/	-	0755	rm
mach-sibyte/	-	0755	rm
mach-tx39xx/	-	0755	rm
mach-tx49xx/	-	0755	rm
mach-vr41xx/	-	0755	rm
mips-boards/	-	0755	rm
netlogic/	-	0755	rm
octeon/	-	0755	rm
pci/	-	0755	rm
sgi/	-	0755	rm
sibyte/	-	0755	rm
sn/	-	0755	rm
txx9/	-	0755	rm
vdso/	-	0755	rm
vr41xx/	-	0755	rm
xtalk/	-	0755	rm
abi.h	853	0644	edit dl rm
addrspace.h	4039	0644	edit dl rm
amon.h	409	0644	edit dl rm
arch_hweight.h	792	0644	edit dl rm
asm-eva.h	7343	0644	edit dl rm
asm-offsets.h	35	0644	edit dl rm
asm-prototypes.h	228	0644	edit dl rm
asm.h	6688	0644	edit dl rm
asmmacro-32.h	2529	0644	edit dl rm
asmmacro-64.h	1254	0644	edit dl rm
asmmacro.h	14639	0644	edit dl rm
atomic.h	8299	0644	edit dl rm
barrier.h	3507	0644	edit dl rm
bcache.h	2086	0644	edit dl rm
bitops.h	10914	0644	edit dl rm
bitrev.h	608	0644	edit dl rm
bmips-spaces.h	268	0644	edit dl rm
bmips.h	3097	0644	edit dl rm
bootinfo.h	4928	0644	edit dl rm
branch.h	2503	0644	edit dl rm
break.h	787	0644	edit dl rm
bug.h	759	0644	edit dl rm
bugs.h	640	0644	edit dl rm
cache.h	527	0644	edit dl rm
cacheflush.h	4863	0644	edit dl rm
cacheops.h	3801	0644	edit dl rm
cdmm.h	3761	0644	edit dl rm
cevt-r4k.h	823	0644	edit dl rm
checksum.h	5743	0644	edit dl rm
clocksource.h	273	0644	edit dl rm
cmp.h	492	0644	edit dl rm
cmpxchg.h	8880	0644	edit dl rm
compat-signal.h	640	0644	edit dl rm
compat.h	3866	0644	edit dl rm
compiler.h	2669	0644	edit dl rm
cop2.h	1812	0644	edit dl rm
cpu-features.h	22752	0644	edit dl rm
cpu-info.h	6303	0644	edit dl rm
cpu-type.h	4256	0644	edit dl rm
cpu.h	16955	0644	edit dl rm
cpufeature.h	510	0644	edit dl rm
debug.h	447	0644	edit dl rm
delay.h	841	0644	edit dl rm
div64.h	2223	0644	edit dl rm
dma-direct.h	255	0644	edit dl rm
dma-mapping.h	365	0644	edit dl rm
dma.h	10161	0644	edit dl rm
dmi.h	547	0644	edit dl rm
ds1287.h	333	0644	edit dl rm
dsemul.h	3595	0644	edit dl rm
dsp.h	1747	0644	edit dl rm
edac.h	839	0644	edit dl rm
elf.h	15559	0644	edit dl rm
elfcore-compat.h	841	0644	edit dl rm
errno.h	429	0644	edit dl rm
eva.h	796	0644	edit dl rm
exec.h	579	0644	edit dl rm
extable.h	241	0644	edit dl rm
fb.h	372	0644	edit dl rm
fixmap.h	2219	0644	edit dl rm
floppy.h	1609	0644	edit dl rm
fpregdef.h	2726	0644	edit dl rm
fpu.h	7332	0644	edit dl rm
fpu_emulator.h	4844	0644	edit dl rm
ftrace.h	2659	0644	edit dl rm
futex.h	5241	0644	edit dl rm
ginvt.h	1056	0644	edit dl rm
gio_device.h	1411	0644	edit dl rm
gt64120.h	19218	0644	edit dl rm
hardirq.h	544	0644	edit dl rm
hazards.h	8673	0644	edit dl rm
highmem.h	1741	0644	edit dl rm
hpet.h	1974	0644	edit dl rm
hugetlb.h	2165	0644	edit dl rm
hw_irq.h	475	0644	edit dl rm
i8259.h	2440	0644	edit dl rm
ide.h	330	0644	edit dl rm
idle.h	727	0644	edit dl rm
inst.h	2398	0644	edit dl rm
io.h	17334	0644	edit dl rm
irq.h	2408	0644	edit dl rm
irqflags.h	4206	0644	edit dl rm
irq_cpu.h	427	0644	edit dl rm
irq_gt641xx.h	2074	0644	edit dl rm
irq_regs.h	540	0644	edit dl rm
isa-rev.h	556	0644	edit dl rm
isadep.h	603	0644	edit dl rm
jazz.h	8192	0644	edit dl rm
jazzdma.h	2826	0644	edit dl rm
jump_label.h	1571	0644	edit dl rm
Kbuild	414	0644	edit dl rm
kdebug.h	303	0644	edit dl rm
kexec.h	1490	0644	edit dl rm
kgdb.h	1222	0644	edit dl rm
kprobes.h	1727	0644	edit dl rm
kvm_host.h	30488	0644	edit dl rm
kvm_types.h	184	0644	edit dl rm
linkage.h	306	0644	edit dl rm
llsc.h	923	0644	edit dl rm
local.h	5473	0644	edit dl rm
maar.h	4270	0644	edit dl rm
machine.h	2795	0644	edit dl rm
mc146818-time.h	3779	0644	edit dl rm
mc146818rtc.h	450	0644	edit dl rm
mips-cm.h	16857	0644	edit dl rm
mips-cpc.h	5766	0644	edit dl rm
mips-cps.h	6494	0644	edit dl rm
mips-gic.h	12387	0644	edit dl rm
mips-r2-to-r6-emul.h	2095	0644	edit dl rm
mipsmtregs.h	11171	0644	edit dl rm
mipsprom.h	2146	0644	edit dl rm
mipsregs.h	96792	0644	edit dl rm
mips_mt.h	707	0644	edit dl rm
mmiowb.h	197	0644	edit dl rm
mmu.h	555	0644	edit dl rm
mmu_context.h	6205	0644	edit dl rm
mmzone.h	427	0644	edit dl rm
module.h	2388	0644	edit dl rm
msa.h	7525	0644	edit dl rm
msc01_ic.h	6709	0644	edit dl rm
paccess.h	3140	0644	edit dl rm
page.h	7610	0644	edit dl rm
pci.h	3902	0644	edit dl rm
perf_event.h	336	0644	edit dl rm
pgalloc.h	2571	0644	edit dl rm
pgtable-32.h	8149	0644	edit dl rm
pgtable-64.h	9709	0644	edit dl rm
pgtable-bits.h	7852	0644	edit dl rm
pgtable.h	18529	0644	edit dl rm
pm-cps.h	1515	0644	edit dl rm
pm.h	3871	0644	edit dl rm
prefetch.h	2148	0644	edit dl rm
processor.h	11321	0644	edit dl rm
prom.h	696	0644	edit dl rm
ptrace.h	5582	0644	edit dl rm
r4k-timer.h	604	0644	edit dl rm
r4kcache.h	11373	0644	edit dl rm
reboot.h	440	0644	edit dl rm
reg.h	26	0644	edit dl rm
regdef.h	2693	0644	edit dl rm
rtlx.h	2148	0644	edit dl rm
seccomp.h	810	0644	edit dl rm
setup.h	941	0644	edit dl rm
sgialib.h	1743	0644	edit dl rm
sgiarcs.h	14022	0644	edit dl rm
shmparam.h	352	0644	edit dl rm
sigcontext.h	1060	0644	edit dl rm
signal.h	1042	0644	edit dl rm
sim.h	2070	0644	edit dl rm
smp-cps.h	998	0644	edit dl rm
smp-ops.h	2476	0644	edit dl rm
smp.h	3696	0644	edit dl rm
sni.h	7495	0644	edit dl rm
socket.h	1377	0644	edit dl rm
sparsemem.h	486	0644	edit dl rm
spinlock.h	822	0644	edit dl rm
spinlock_types.h	188	0644	edit dl rm
spram.h	261	0644	edit dl rm
stackframe.h	11157	0644	edit dl rm
stackprotector.h	1177	0644	edit dl rm
stacktrace.h	2199	0644	edit dl rm
string.h	692	0644	edit dl rm
switch_to.h	4455	0644	edit dl rm
sync.h	7823	0644	edit dl rm
syscall.h	3703	0644	edit dl rm
termios.h	2933	0644	edit dl rm
thread_info.h	6640	0644	edit dl rm
time.h	1617	0644	edit dl rm
timex.h	2937	0644	edit dl rm
tlb.h	613	0644	edit dl rm
tlbdebug.h	403	0644	edit dl rm
tlbex.h	977	0644	edit dl rm
tlbflush.h	1683	0644	edit dl rm
tlbmisc.h	320	0644	edit dl rm
topology.h	619	0644	edit dl rm
traps.h	1229	0644	edit dl rm
txx9irq.h	743	0644	edit dl rm
txx9pio.h	592	0644	edit dl rm
txx9tmr.h	1625	0644	edit dl rm
types.h	459	0644	edit dl rm
uaccess.h	16450	0644	edit dl rm
uasm.h	9578	0644	edit dl rm
unaligned-emul.h	26856	0644	edit dl rm
unistd.h	1860	0644	edit dl rm
unroll.h	2860	0644	edit dl rm
uprobes.h	1141	0644	edit dl rm
vdso.h	1469	0644	edit dl rm
vermagic.h	2372	0644	edit dl rm
vga.h	1291	0644	edit dl rm
vmalloc.h	90	0644	edit dl rm
vpe.h	2843	0644	edit dl rm
war.h	2282	0644	edit dl rm
watch.h	827	0644	edit dl rm
wbflush.h	694	0644	edit dl rm
yamon-dt.h	1717	0644	edit dl rm

Edit: /usr/src/linux-headers-5.15.0-181/arch/mips/include/asm/dma.h (10161B)

/* SPDX-License-Identifier: GPL-2.0 */
/*
 * linux/include/asm/dma.h: Defines for using and allocating dma channels.
 * Written by Hennus Bergman, 1992.
 * High DMA channel support & info by Hannu Savolainen
 * and John Boyd, Nov. 1992.
 *
 * NOTE: all this is true *only* for ISA/EISA expansions on Mips boards
 * and can only be used for expansion cards. Onboard DMA controllers, such
 * as the R4030 on Jazz boards behave totally different!
 */

#ifndef _ASM_DMA_H
#define _ASM_DMA_H

#include <asm/io.h>			/* need byte IO */
#include <linux/spinlock.h>		/* And spinlocks */
#include <linux/delay.h>

#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
#define dma_outb	outb_p
#else
#define dma_outb	outb
#endif

#define dma_inb		inb

/*
 * NOTES about DMA transfers:
 *
 *  controller 1: channels 0-3, byte operations, ports 00-1F
 *  controller 2: channels 4-7, word operations, ports C0-DF
 *
 *  - ALL registers are 8 bits only, regardless of transfer size
 *  - channel 4 is not used - cascades 1 into 2.
 *  - channels 0-3 are byte - addresses/counts are for physical bytes
 *  - channels 5-7 are word - addresses/counts are for physical words
 *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
 *  - transfer count loaded to registers is 1 less than actual count
 *  - controller 2 offsets are all even (2x offsets for controller 1)
 *  - page registers for 5-7 don't use data bit 0, represent 128K pages
 *  - page registers for 0-3 use bit 0, represent 64K pages
 *
 * DMA transfers are limited to the lower 16MB of _physical_ memory.
 * Note that addresses loaded into registers must be _physical_ addresses,
 * not logical addresses (which may differ if paging is active).
 *
 *  Address mapping for channels 0-3:
 *
 *   A23 ... A16 A15 ... A8  A7 ... A0	  (Physical addresses)
 *    |	 ...  |	  |  ... |   |	... |
 *    |	 ...  |	  |  ... |   |	... |
 *    |	 ...  |	  |  ... |   |	... |
 *   P7	 ...  P0  A7 ... A0  A7 ... A0
 * |	Page	| Addr MSB | Addr LSB |	  (DMA registers)
 *
 *  Address mapping for channels 5-7:
 *
 *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0	   (Physical addresses)
 *    |	 ...  |	  \   \	  ... \	 \  \  ... \  \
 *    |	 ...  |	   \   \   ... \  \  \	... \  (not used)
 *    |	 ...  |	    \	\   ... \  \  \	 ... \
 *   P7	 ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
 * |	  Page	    |  Addr MSB	  |  Addr LSB  |   (DMA registers)
 *
 * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
 * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
 * the hardware level, so odd-byte transfers aren't possible).
 *
 * Transfer count (_not # bytes_) is limited to 64K, represented as actual
 * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
 * and up to 128K bytes may be transferred on channels 5-7 in one operation.
 *
 */

#ifndef CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN
#define MAX_DMA_CHANNELS	8
#endif

/*
 * The maximum address in KSEG0 that we can perform a DMA transfer to on this
 * platform.  This describes only the PC style part of the DMA logic like on
 * Deskstations or Acer PICA but not the much more versatile DMA logic used
 * for the local devices on Acer PICA or Magnums.
 */
#if defined(CONFIG_SGI_IP22) || defined(CONFIG_SGI_IP28)
/* don't care; ISA bus master won't work, ISA slave DMA supports 32bit addr */
#define MAX_DMA_ADDRESS		PAGE_OFFSET
#else
#define MAX_DMA_ADDRESS		(PAGE_OFFSET + 0x01000000)
#endif
#define MAX_DMA_PFN		PFN_DOWN(virt_to_phys((void *)MAX_DMA_ADDRESS))

#ifndef MAX_DMA32_PFN
#define MAX_DMA32_PFN		(1UL << (32 - PAGE_SHIFT))
#endif

/* 8237 DMA controllers */
#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */

/* DMA controller registers */
#define DMA1_CMD_REG		0x08	/* command register (w) */
#define DMA1_STAT_REG		0x08	/* status register (r) */
#define DMA1_REQ_REG		0x09	/* request register (w) */
#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
#define DMA1_MODE_REG		0x0B	/* mode register (w) */
#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
#define DMA1_TEMP_REG		0x0D	/* Temporary Register (r) */
#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
#define DMA1_CLR_MASK_REG	0x0E	/* Clear Mask */
#define DMA1_MASK_ALL_REG	0x0F	/* all-channels mask (w) */

#define DMA2_CMD_REG		0xD0	/* command register (w) */
#define DMA2_STAT_REG		0xD0	/* status register (r) */
#define DMA2_REQ_REG		0xD2	/* request register (w) */
#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
#define DMA2_MODE_REG		0xD6	/* mode register (w) */
#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
#define DMA2_TEMP_REG		0xDA	/* Temporary Register (r) */
#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
#define DMA2_CLR_MASK_REG	0xDC	/* Clear Mask */
#define DMA2_MASK_ALL_REG	0xDE	/* all-channels mask (w) */

#define DMA_ADDR_0		0x00	/* DMA address registers */
#define DMA_ADDR_1		0x02
#define DMA_ADDR_2		0x04
#define DMA_ADDR_3		0x06
#define DMA_ADDR_4		0xC0
#define DMA_ADDR_5		0xC4
#define DMA_ADDR_6		0xC8
#define DMA_ADDR_7		0xCC

#define DMA_CNT_0		0x01	/* DMA count registers */
#define DMA_CNT_1		0x03
#define DMA_CNT_2		0x05
#define DMA_CNT_3		0x07
#define DMA_CNT_4		0xC2
#define DMA_CNT_5		0xC6
#define DMA_CNT_6		0xCA
#define DMA_CNT_7		0xCE

#define DMA_PAGE_0		0x87	/* DMA page registers */
#define DMA_PAGE_1		0x83
#define DMA_PAGE_2		0x81
#define DMA_PAGE_3		0x82
#define DMA_PAGE_5		0x8B
#define DMA_PAGE_6		0x89
#define DMA_PAGE_7		0x8A

#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
#define DMA_MODE_CASCADE 0xC0	/* pass thru DREQ->HRQ, DACK<-HLDA only */

#define DMA_AUTOINIT	0x10

extern spinlock_t  dma_spin_lock;

static __inline__ unsigned long claim_dma_lock(void)
{
	unsigned long flags;
	spin_lock_irqsave(&dma_spin_lock, flags);
	return flags;
}

static __inline__ void release_dma_lock(unsigned long flags)
{
	spin_unlock_irqrestore(&dma_spin_lock, flags);
}

/* enable/disable a specific DMA channel */
static __inline__ void enable_dma(unsigned int dmanr)
{
	if (dmanr<=3)
		dma_outb(dmanr,	 DMA1_MASK_REG);
	else
		dma_outb(dmanr & 3,  DMA2_MASK_REG);
}

static __inline__ void disable_dma(unsigned int dmanr)
{
	if (dmanr<=3)
		dma_outb(dmanr | 4,  DMA1_MASK_REG);
	else
		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
}

/* Clear the 'DMA Pointer Flip Flop'.
 * Write 0 for LSB/MSB, 1 for MSB/LSB access.
 * Use this once to initialize the FF to a known state.
 * After that, keep track of it. :-)
 * --- In order to do that, the DMA routines below should ---
 * --- only be used while holding the DMA lock ! ---
 */
static __inline__ void clear_dma_ff(unsigned int dmanr)
{
	if (dmanr<=3)
		dma_outb(0,  DMA1_CLEAR_FF_REG);
	else
		dma_outb(0,  DMA2_CLEAR_FF_REG);
}

/* set mode (above) for a specific DMA channel */
static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
{
	if (dmanr<=3)
		dma_outb(mode | dmanr,	DMA1_MODE_REG);
	else
		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
}

/* Set only the page register bits of the transfer address.
 * This is used for successive transfers when we know the contents of
 * the lower 16 bits of the DMA current address register, but a 64k boundary
 * may have been crossed.
 */
static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
{
	switch(dmanr) {
		case 0:
			dma_outb(pagenr, DMA_PAGE_0);
			break;
		case 1:
			dma_outb(pagenr, DMA_PAGE_1);
			break;
		case 2:
			dma_outb(pagenr, DMA_PAGE_2);
			break;
		case 3:
			dma_outb(pagenr, DMA_PAGE_3);
			break;
		case 5:
			dma_outb(pagenr & 0xfe, DMA_PAGE_5);
			break;
		case 6:
			dma_outb(pagenr & 0xfe, DMA_PAGE_6);
			break;
		case 7:
			dma_outb(pagenr & 0xfe, DMA_PAGE_7);
			break;
	}
}

/* Set transfer address & page bits for specific DMA channel.
 * Assumes dma flipflop is clear.
 */
static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
{
	set_dma_page(dmanr, a>>16);
	if (dmanr <= 3)	 {
	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
	    dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
	}  else	 {
	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
	}
}

/* Set transfer size (max 64k for DMA0..3, 128k for DMA5..7) for
 * a specific DMA channel.
 * You must ensure the parameters are valid.
 * NOTE: from a manual: "the number of transfers is one more
 * than the initial word count"! This is taken into account.
 * Assumes dma flip-flop is clear.
 * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
 */
static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
{
	count--;
	if (dmanr <= 3)	 {
	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
	} else {
	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
	}
}

/* Get DMA residue count. After a DMA transfer, this
 * should return zero. Reading this while a DMA transfer is
 * still in progress will return unpredictable results.
 * If called before the channel has been used, it may return 1.
 * Otherwise, it returns the number of _bytes_ left to transfer.
 *
 * Assumes DMA flip-flop is clear.
 */
static __inline__ int get_dma_residue(unsigned int dmanr)
{
	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;

/* using short to get 16-bit wrap around */
	unsigned short count;

count = 1 + dma_inb(io_port);
	count += dma_inb(io_port) << 8;

return (dmanr<=3)? count : (count<<1);
}

/* These are in kernel/dma.c: */
extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
extern void free_dma(unsigned int dmanr);	/* release it again */

/* From PCI */

#ifdef CONFIG_PCI
extern int isa_dma_bridge_buggy;
#else
#define isa_dma_bridge_buggy	(0)
#endif

#endif /* _ASM_DMA_H */

cmd: