/
usr
/
src
/
linux-headers-5.15.0-181
/
drivers
/
thermal
/
qcom
/
/usr/src/linux-headers-5.15.0-181/drivers/thermal/qcom
mkdir
upload
Name
Size
Mode
Actions
Kconfig
1891
0644
edit
dl
rm
Makefile
314
0644
edit
dl
rm
Edit:
/usr/src/linux-headers-5.15.0-181/drivers/thermal/qcom/Kconfig
(1891B)
# SPDX-License-Identifier: GPL-2.0-only config QCOM_TSENS tristate "Qualcomm TSENS Temperature Alarm" depends on QCOM_QFPROM depends on ARCH_QCOM || COMPILE_TEST help This enables the thermal sysfs driver for the TSENS device. It shows up in Sysfs as a thermal zone with multiple trip points. Disabling the thermal zone device via the mode file results in disabling the sensor. Also able to set threshold temperature for both hot and cold and update when a threshold is reached. config QCOM_SPMI_ADC_TM5 tristate "Qualcomm SPMI PMIC Thermal Monitor ADC5" depends on OF && SPMI && IIO select REGMAP_SPMI select QCOM_VADC_COMMON help This enables the thermal driver for the ADC thermal monitoring device. It shows up as a thermal zone with multiple trip points. Thermal client sets threshold temperature for both warm and cool and gets updated when a threshold is reached. config QCOM_SPMI_TEMP_ALARM tristate "Qualcomm SPMI PMIC Temperature Alarm" depends on OF && SPMI && IIO select REGMAP_SPMI help This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP) PMIC devices. It shows up in sysfs as a thermal sensor with multiple trip points. The temperature reported by the thermal sensor reflects the real time die temperature if an ADC is present or an estimate of the temperature based upon the over temperature stage value. config QCOM_LMH tristate "Qualcomm Limits Management Hardware" depends on ARCH_QCOM || COMPILE_TEST select QCOM_SCM help This enables initialization of Qualcomm limits management hardware(LMh). LMh allows for hardware-enforced mitigation for cpus based on input from temperature and current sensors. On many newer Qualcomm SoCs LMh is configured in the firmware and this feature need not be enabled. However, on certain SoCs like sdm845 LMh has to be configured from kernel.
Save
cmd:
run