/
usr
/
src
/
linux-headers-5.15.0-181
/
drivers
/
usb
/
storage
/
/usr/src/linux-headers-5.15.0-181/drivers/usb/storage
mkdir
upload
Name
Size
Mode
Actions
Kconfig
6793
0644
edit
dl
rm
Makefile
1604
0644
edit
dl
rm
Edit:
/usr/src/linux-headers-5.15.0-181/drivers/usb/storage/Kconfig
(6793B)
# SPDX-License-Identifier: GPL-2.0 # # USB Storage driver configuration # comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" comment "also be needed; see USB_STORAGE Help for more info" config USB_STORAGE tristate "USB Mass Storage support" depends on SCSI help Say Y here if you want to connect USB mass storage devices to your computer's USB port. This is the driver you need for USB floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, USB flash devices, and memory sticks, along with similar devices. This driver may also be used for some cameras and card readers. This option depends on 'SCSI' support being enabled, but you probably also need 'SCSI device support: SCSI disk support' (BLK_DEV_SD) for most USB storage devices. To compile this driver as a module, choose M here: the module will be called usb-storage. if USB_STORAGE config USB_STORAGE_DEBUG bool "USB Mass Storage verbose debug" help Say Y here in order to have the USB Mass Storage code generate verbose debugging messages. config USB_STORAGE_REALTEK tristate "Realtek Card Reader support" help Say Y here to include additional code to support the power-saving function for Realtek RTS51xx USB card readers. If this driver is compiled as a module, it will be named ums-realtek. config REALTEK_AUTOPM bool "Realtek Card Reader autosuspend support" depends on USB_STORAGE_REALTEK && PM default y config USB_STORAGE_DATAFAB tristate "Datafab Compact Flash Reader support" help Support for certain Datafab CompactFlash readers. Datafab has a web page at <http://www.datafab.com/>. If this driver is compiled as a module, it will be named ums-datafab. config USB_STORAGE_FREECOM tristate "Freecom USB/ATAPI Bridge support" help Support for the Freecom USB to IDE/ATAPI adaptor. Freecom has a web page at <https://www.freecom.de/>. If this driver is compiled as a module, it will be named ums-freecom. config USB_STORAGE_ISD200 tristate "ISD-200 USB/ATA Bridge support" help Say Y here if you want to use USB Mass Store devices based on the In-Systems Design ISD-200 USB/ATA bridge. Some of the products that use this chip are: - Archos Jukebox 6000 - ISD SmartCable for Storage - Taiwan Skymaster CD530U/DEL-0241 IDE bridge - Sony CRX10U CD-R/RW drive - CyQ've CQ8060A CDRW drive - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) If this driver is compiled as a module, it will be named ums-isd200. config USB_STORAGE_USBAT tristate "USBAT/USBAT02-based storage support" help Say Y here to include additional code to support storage devices based on the SCM/Shuttle USBAT/USBAT02 processors. Devices reported to work with this driver include: - CompactFlash reader included with Kodak DC3800 camera - Dane-Elec Zmate CompactFlash reader - Delkin Efilm reader2 - HP 8200e/8210e/8230e CD-Writer Plus drives - I-JAM JS-50U - Jessops CompactFlash JESDCFRU BLACK - Kingston Technology PCREAD-USB/CF - Maxell UA4 CompactFlash reader - Memorex UCF-100 - Microtech ZiO! ICS-45 CF2 - RCA LYRA MP3 portable - Sandisk ImageMate SDDR-05b If this driver is compiled as a module, it will be named ums-usbat. config USB_STORAGE_SDDR09 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" help Say Y here to include additional code to support the Sandisk SDDR-09 SmartMedia reader in the USB Mass Storage driver. Also works for the Microtech Zio! CompactFlash/SmartMedia reader. If this driver is compiled as a module, it will be named ums-sddr09. config USB_STORAGE_SDDR55 tristate "SanDisk SDDR-55 SmartMedia support" help Say Y here to include additional code to support the Sandisk SDDR-55 SmartMedia reader in the USB Mass Storage driver. If this driver is compiled as a module, it will be named ums-sddr55. config USB_STORAGE_JUMPSHOT tristate "Lexar Jumpshot Compact Flash Reader" help Say Y here to include additional code to support the Lexar Jumpshot USB CompactFlash reader. If this driver is compiled as a module, it will be named ums-jumpshot. config USB_STORAGE_ALAUDA tristate "Olympus MAUSB-10/Fuji DPC-R1 support" help Say Y here to include additional code to support the Olympus MAUSB-10 and Fujifilm DPC-R1 USB Card reader/writer devices. These devices are based on the Alauda chip and support both XD and SmartMedia cards. If this driver is compiled as a module, it will be named ums-alauda. config USB_STORAGE_ONETOUCH tristate "Support OneTouch Button on Maxtor Hard Drives" depends on INPUT=y || INPUT=USB_STORAGE help Say Y here to include additional code to support the Maxtor OneTouch USB hard drive's onetouch button. This code registers the button on the front of Maxtor OneTouch USB hard drive's as an input device. An action can be associated with this input in any keybinding software. (e.g. gnome's keyboard short- cuts) If this driver is compiled as a module, it will be named ums-onetouch. config USB_STORAGE_KARMA tristate "Support for Rio Karma music player" help Say Y here to include additional code to support the Rio Karma USB interface. This code places the Rio Karma into mass storage mode, enabling it to be mounted as an ordinary filesystem. Performing an eject on the resulting scsi device node returns the Karma to normal operation. If this driver is compiled as a module, it will be named ums-karma. config USB_STORAGE_CYPRESS_ATACB tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" help Say Y here if you want to use SAT (ata pass through) on devices based on the Cypress USB/ATA bridge supporting ATACB. This will allow you to use tools to tune and monitor your drive (like hdparm or smartctl). If you say no here your device will still work with the standard usb mass storage class. If this driver is compiled as a module, it will be named ums-cypress. config USB_STORAGE_ENE_UB6250 tristate "USB ENE card reader support" help Say Y here if you wish to control a ENE SD/MS Card reader. Note that this driver does not support SM cards. To compile this driver as a module, choose M here: the module will be called ums-eneub6250. endif # USB_STORAGE config USB_UAS tristate "USB Attached SCSI" depends on SCSI && USB_STORAGE help The USB Attached SCSI protocol is supported by some USB storage devices. It permits higher performance by supporting multiple outstanding commands. If you don't know whether you have a UAS device, it is safe to say 'Y' or 'M' here and the kernel will use the right driver. If you compile this driver as a module, it will be named uas.
Save
cmd:
run