/
usr
/
src
/
linux-headers-5.15.0-190
/
arch
/
powerpc
/
boot
/
/usr/src/linux-headers-5.15.0-190/arch/powerpc/boot
mkdir
upload
Name
Size
Mode
Actions
dts/
-
0755
rm
install.sh
1417
0644
edit
dl
rm
Makefile
19188
0644
edit
dl
rm
Edit:
/usr/src/linux-headers-5.15.0-190/arch/powerpc/boot/Makefile
(19188B)
# SPDX-License-Identifier: GPL-2.0 # Makefile for making ELF bootable images for booting on CHRP # using Open Firmware. # # Geert Uytterhoeven September 1997 # # Based on coffboot by Paul Mackerras # Simplified for ppc64 by Todd Inglett # # NOTE: this code may be built for 32 bit in ELF32 format even though # it packages a 64 bit kernel. We do this to simplify the # bootloader and increase compatibility with OpenFirmware. # # To this end we need to define BOOTCC, etc, as the tools # needed to build the 32 bit image. That's normally the same # compiler for the rest of the kernel, with the -m32 flag added. # To make it easier to setup a cross compiler, # CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE # in the toplevel makefile. all: $(obj)/zImage ifdef CROSS32_COMPILE ifdef CONFIG_CC_IS_CLANG BOOTCC := $(CROSS32_COMPILE)clang else BOOTCC := $(CROSS32_COMPILE)gcc endif BOOTAR := $(CROSS32_COMPILE)ar else BOOTCC := $(CC) BOOTAR := $(AR) endif BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ -fno-strict-aliasing -O2 -msoft-float -mno-altivec -mno-vsx \ $(call cc-option,-mno-spe) $(call cc-option,-mspe=no) \ -pipe -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \ $(LINUXINCLUDE) ifdef CONFIG_PPC64_BOOT_WRAPPER BOOTCFLAGS += -m64 else BOOTCFLAGS += -m32 endif BOOTCFLAGS += -isystem $(shell $(BOOTCC) -print-file-name=include) ifdef CONFIG_CPU_BIG_ENDIAN BOOTCFLAGS += -mbig-endian else BOOTCFLAGS += -mlittle-endian BOOTCFLAGS += $(call cc-option,-mabi=elfv2) endif BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -nostdinc BOOTARFLAGS := -crD ifdef CONFIG_CC_IS_CLANG BOOTCFLAGS += $(CLANG_FLAGS) BOOTAFLAGS += $(CLANG_FLAGS) endif ifdef CONFIG_DEBUG_INFO BOOTCFLAGS += -g endif ifeq ($(call cc-option-yn, -fstack-protector),y) BOOTCFLAGS += -fno-stack-protector endif BOOTCFLAGS += -include $(srctree)/include/linux/compiler_attributes.h BOOTCFLAGS += -I$(objtree)/$(obj) -I$(srctree)/$(obj) DTC_FLAGS ?= -p 1024 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=440 $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405 # The pre-boot decompressors pull in a lot of kernel headers and other source # files. This creates a bit of a dependency headache since we need to copy # these files into the build dir, fix up any includes and ensure that dependent # files are copied in the right order. # these need to be seperate variables because they are copied out of different # directories in the kernel tree. Sure you COULd merge them, but it's a # cure-is-worse-than-disease situation. zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c zlibheader-$(CONFIG_KERNEL_GZIP) := inffast.h inffixed.h inflate.h inftrees.h infutil.h zliblinuxheader-$(CONFIG_KERNEL_GZIP) := zlib.h zconf.h zutil.h $(addprefix $(obj)/, decompress.o): \ $(addprefix $(obj)/,$(zlib-decomp-y)) $(addprefix $(obj)/, $(zlib-decomp-y)): \ $(addprefix $(obj)/,$(zliblinuxheader-y)) \ $(addprefix $(obj)/,$(zlibheader-y)) \ $(addprefix $(obj)/,$(zlib-y)) $(addprefix $(obj)/,$(zlib-y)): \ $(addprefix $(obj)/,$(zliblinuxheader-y)) \ $(addprefix $(obj)/,$(zlibheader-y)) libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c libfdtheader := fdt.h libfdt.h libfdt_internal.h $(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o \ treeboot-akebono.o treeboot-currituck.o treeboot-iss4xx.o): \ $(addprefix $(obj)/,$(libfdtheader)) src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \ $(libfdt) libfdt-wrapper.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \ elf_util.c $(zlib-y) devtree.c stdlib.c \ oflib.c ofconsole.c cuboot.c src-wlib-$(CONFIG_PPC_MPC52xx) += mpc52xx-psc.c src-wlib-$(CONFIG_PPC64_BOOT_WRAPPER) += opal-calls.S opal.c ifndef CONFIG_PPC64_BOOT_WRAPPER src-wlib-y += crtsavres.S endif src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c src-wlib-$(CONFIG_CPM) += cpm-serial.c src-plat-y := of.c epapr.c src-plat-$(CONFIG_40x) += fixed-head.S cuboot-hotfoot.c \ cuboot-acadia.c \ cuboot-kilauea.c simpleboot.c src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ cuboot-bamboo.c cuboot-sam440ep.c \ cuboot-sequoia.c cuboot-rainier.c \ cuboot-taishan.c cuboot-katmai.c \ cuboot-warp.c cuboot-yosemite.c \ treeboot-iss4xx.c treeboot-currituck.c \ treeboot-akebono.c \ simpleboot.c fixed-head.S src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \ gamecube-head.S gamecube.c \ wii-head.S wii.c holly.c \ fixed-head.S mvme5100.c src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c src-wlib := $(sort $(src-wlib-y)) src-plat := $(sort $(src-plat-y)) src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) obj-boot := $(addsuffix .o, $(basename $(src-boot))) obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib)))) obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat)))) obj-plat: $(libfdt) quiet_cmd_copy_kern_src = COPY $@ cmd_copy_kern_src = sed -f $(srctree)/arch/powerpc/boot/fixup-headers.sed $< > $@ $(addprefix $(obj)/,$(zlib-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% $(call cmd,copy_kern_src) $(addprefix $(obj)/,$(zlibheader-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% $(call cmd,copy_kern_src) $(addprefix $(obj)/,$(zliblinuxheader-y)): $(obj)/%: $(srctree)/include/linux/% $(call cmd,copy_kern_src) $(addprefix $(obj)/,$(zlib-decomp-y)): $(obj)/%: $(srctree)/lib/% $(call cmd,copy_kern_src) quiet_cmd_copy_libfdt = COPY $@ cmd_copy_libfdt = cp $< $@ $(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% $(call cmd,copy_libfdt) $(obj)/empty.c: $(Q)touch $@ $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S $(Q)cp $< $@ clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \ $(zlib-decomp-) $(libfdt) $(libfdtheader) \ empty.c zImage.coff.lds zImage.ps3.lds zImage.lds quiet_cmd_bootcc = BOOTCC $@ cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $< quiet_cmd_bootas = BOOTAS $@ cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $< quiet_cmd_bootar = BOOTAR $@ cmd_bootar = $(BOOTAR) $(BOOTARFLAGS) $@.$$$$ $(real-prereqs); mv $@.$$$$ $@ $(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE $(call if_changed_dep,bootcc) $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE $(Q)mkdir -p $(dir $@) $(call if_changed_dep,bootcc) $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE $(Q)mkdir -p $(dir $@) $(call if_changed_dep,bootas) $(obj)/wrapper.a: $(obj-wlib) FORCE $(call if_changed,bootar) hostprogs := addnote hack-coff mktree targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) zImage.lds extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds dtstree := $(srctree)/$(src)/dts wrapper :=$(srctree)/$(src)/wrapper wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ $(wrapper) FORCE ############# # Bits for building various flavours of zImage ifneq ($(CROSS32_COMPILE),) CROSSWRAP := -C "$(CROSS32_COMPILE)" else ifneq ($(CROSS_COMPILE),) CROSSWRAP := -C "$(CROSS_COMPILE)" endif endif compressor-$(CONFIG_KERNEL_GZIP) := gz compressor-$(CONFIG_KERNEL_XZ) := xz compressor-$(CONFIG_KERNEL_LZMA) := lzma compressor-$(CONFIG_KERNEL_LZO) := lzo # args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd quiet_cmd_wrap = WRAP $@ cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \ $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \ vmlinux image-$(CONFIG_PPC_PSERIES) += zImage.pseries image-$(CONFIG_PPC_POWERNV) += zImage.pseries image-$(CONFIG_PPC_MAPLE) += zImage.maple image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries image-$(CONFIG_PPC_PS3) += dtbImage.ps3 image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac image-$(CONFIG_PPC_HOLLY) += dtbImage.holly image-$(CONFIG_DEFAULT_UIMAGE) += uImage image-$(CONFIG_EPAPR_BOOT) += zImage.epapr # # Targets which embed a device tree blob # # Theses are default targets to build images which embed device tree blobs. # They are only required on boards which do not have FDT support in firmware. # Boards with newish u-boot firmware can use the uImage target above # # Board ports in arch/powerpc/platform/40x/Kconfig image-$(CONFIG_HOTFOOT) += cuImage.hotfoot image-$(CONFIG_ACADIA) += cuImage.acadia image-$(CONFIG_OBS600) += uImage.obs600 # Board ports in arch/powerpc/platform/44x/Kconfig image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo image-$(CONFIG_SAM440EP) += cuImage.sam440ep image-$(CONFIG_SEQUOIA) += cuImage.sequoia image-$(CONFIG_RAINIER) += cuImage.rainier image-$(CONFIG_TAISHAN) += cuImage.taishan image-$(CONFIG_KATMAI) += cuImage.katmai image-$(CONFIG_WARP) += cuImage.warp image-$(CONFIG_YOSEMITE) += cuImage.yosemite image-$(CONFIG_ISS4xx) += treeImage.iss4xx \ treeImage.iss4xx-mpic image-$(CONFIG_CURRITUCK) += treeImage.currituck image-$(CONFIG_AKEBONO) += treeImage.akebono # Board ports in arch/powerpc/platform/8xx/Kconfig image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ dtbImage.adder875-redboot # Board ports in arch/powerpc/platform/52xx/Kconfig image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 # Board ports in arch/powerpc/platform/82xx/Kconfig image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads image-$(CONFIG_PQ2FADS) += cuImage.pq2fads image-$(CONFIG_EP8248E) += dtbImage.ep8248e # Board ports in arch/powerpc/platform/83xx/Kconfig image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds image-$(CONFIG_MPC832x_RDB) += cuImage.mpc832x_rdb image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \ cuImage.mpc8349emitxgp image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot # Board ports in arch/powerpc/platform/85xx/Kconfig image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \ cuImage.mpc8548cds_32b \ cuImage.mpc8555cds image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \ cuImage.mpc8572ds image-$(CONFIG_TQM8540) += cuImage.tqm8540 image-$(CONFIG_TQM8541) += cuImage.tqm8541 image-$(CONFIG_TQM8548) += cuImage.tqm8548 image-$(CONFIG_TQM8555) += cuImage.tqm8555 image-$(CONFIG_TQM8560) += cuImage.tqm8560 image-$(CONFIG_KSI8560) += cuImage.ksi8560 # Board ports in arch/powerpc/platform/86xx/Kconfig image-$(CONFIG_MVME7100) += dtbImage.mvme7100 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig image-$(CONFIG_STORCENTER) += cuImage.storcenter image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 image-$(CONFIG_GAMECUBE) += dtbImage.gamecube image-$(CONFIG_WII) += dtbImage.wii image-$(CONFIG_MVME5100) += dtbImage.mvme5100 # Board port in arch/powerpc/platform/amigaone/Kconfig image-$(CONFIG_AMIGAONE) += cuImage.amigaone image-$(CONFIG_PPC_MICROWATT) += dtbImage.microwatt # For 32-bit powermacs, build the COFF and miboot images # as well as the ELF images. ifdef CONFIG_PPC32 image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot endif # Allow extra targets to be added to the defconfig image-y += $(subst ",,$(CONFIG_EXTRA_TARGETS)) initrd- := $(patsubst zImage%, zImage.initrd%, $(image-)) initrd-y := $(patsubst zImage%, zImage.initrd%, \ $(patsubst dtbImage%, dtbImage.initrd%, \ $(patsubst simpleImage%, simpleImage.initrd%, \ $(patsubst treeImage%, treeImage.initrd%, $(image-y))))) initrd-y := $(filter-out $(image-y), $(initrd-y)) targets += $(image-y) $(initrd-y) targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \ $(patsubst $(x).%, dts/%.dtb, $(filter $(x).%, $(image-y)))) targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \ $(patsubst $(x).%, dts/fsl/%.dtb, $(filter $(x).%, $(image-y)))) $(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz # Don't put the ramdisk on the pattern rule; when its missing make will try # the pattern rule with less dependencies that also matches (even with the # hard dependency listed). $(obj)/zImage.initrd.%: vmlinux $(wrapperbits) FORCE $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz) $(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperbits) FORCE $(call if_changed,wrap,$(subst $(obj)/zImage.,,$@)) # dtbImage% - a dtbImage is a zImage with an embedded device tree blob $(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) $(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb) # This cannot be in the root of $(src) as the zImage rule always adds a $(obj) # prefix $(obj)/vmlinux.strip: vmlinux $(STRIP) -s -R .comment $< -o $@ $(obj)/uImage: vmlinux $(wrapperbits) FORCE $(call if_changed,wrap,uboot) $(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) $(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb) $(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) $(obj)/cuImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb) $(obj)/simpleImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) $(obj)/simpleImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb) $(obj)/treeImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) $(obj)/treeImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb) # Needed for the above targets to work with dts/fsl/ files $(obj)/dts/%.dtb: $(obj)/dts/fsl/%.dtb @cp $< $@ # If there isn't a platform selected then just strip the vmlinux. ifeq (,$(image-y)) image-y := vmlinux.strip endif $(obj)/zImage: $(addprefix $(obj)/, $(image-y)) $(Q)rm -f $@; ln $< $@ $(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) $(Q)rm -f $@; ln $< $@ # anything not in $(targets) clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \ zImage.miboot zImage.pmac zImage.pseries \ zImage.maple simpleImage.* otheros.bld # clean up files cached by wrapper clean-kernel-base := vmlinux.strip vmlinux.bin clean-kernel := $(addsuffix .gz,$(clean-kernel-base)) clean-kernel += $(addsuffix .xz,$(clean-kernel-base)) # If not absolute clean-files are relative to $(obj). clean-files += $(addprefix $(objtree)/, $(clean-kernel)) WRAPPER_OBJDIR := /usr/lib/kernel-wrapper WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts WRAPPER_BINDIR := /usr/sbin INSTALL := install extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y)) hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs)) wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts)) all-installed := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed) quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) cmd_mkdir = mkdir -p $@ quiet_cmd_install = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@) cmd_install = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@ quiet_cmd_install_dts = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@) cmd_install_dts = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@ quiet_cmd_install_exe = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) cmd_install_exe = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@ quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) cmd_install_wrapper = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\ sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \ -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \ $(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR): $(call cmd,mkdir) $(extra-installed) : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR) $(call cmd,install) $(hostprogs-installed) : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR) $(call cmd,install_exe) $(dts-installed) : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR) $(call cmd,install_dts) $(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR) $(call cmd,install_wrapper) $(obj)/bootwrapper_install: $(all-installed)
Save
cmd:
run