/
usr
/
src
/
linux-headers-5.15.0-190
/
drivers
/
regulator
/
/usr/src/linux-headers-5.15.0-190/drivers/regulator
mkdir
upload
Name
Size
Mode
Actions
Kconfig
46543
0644
edit
dl
rm
Makefile
9035
0644
edit
dl
rm
Edit:
/usr/src/linux-headers-5.15.0-190/drivers/regulator/Kconfig
(46543B)
# SPDX-License-Identifier: GPL-2.0-only menuconfig REGULATOR bool "Voltage and Current Regulator Support" select LINEAR_RANGES help Generic Voltage and Current Regulator support. This framework is designed to provide a generic interface to voltage and current regulators within the Linux kernel. It's intended to provide voltage and current control to client or consumer drivers and also provide status information to user space applications through a sysfs interface. The intention is to allow systems to dynamically control regulator output in order to save power and prolong battery life. This applies to both voltage regulators (where voltage output is controllable) and current sinks (where current output is controllable). This framework safely compiles out if not selected so that client drivers can still be used in systems with no software controllable regulators. If unsure, say no. if REGULATOR config REGULATOR_DEBUG bool "Regulator debug support" help Say yes here to enable debugging support. config REGULATOR_FIXED_VOLTAGE tristate "Fixed voltage regulator support" help This driver provides support for fixed voltage regulators, useful for systems which use a combination of software managed regulators and simple non-configurable regulators. config REGULATOR_VIRTUAL_CONSUMER tristate "Virtual regulator consumer support" help This driver provides a virtual consumer for the voltage and current regulator API which provides sysfs controls for configuring the supplies requested. This is mainly useful for test purposes. If unsure, say no. config REGULATOR_USERSPACE_CONSUMER tristate "Userspace regulator consumer support" help There are some classes of devices that are controlled entirely from user space. Userspace consumer driver provides ability to control power supplies for such devices. If unsure, say no. config REGULATOR_88PG86X tristate "Marvell 88PG86X voltage regulators" depends on I2C select REGMAP_I2C help This driver supports Marvell 88PG867 and 88PG868 voltage regulators. They provide two I2C-controlled DC/DC step-down converters with sleep mode and separate enable pins. config REGULATOR_88PM800 tristate "Marvell 88PM800 Power regulators" depends on MFD_88PM800 help This driver supports Marvell 88PM800 voltage regulator chips. It delivers digitally programmable output, the voltage is programmed via I2C interface. It's suitable to support PXA988 chips to control VCC_MAIN and various voltages. config REGULATOR_88PM8607 tristate "Marvell 88PM8607 Power regulators" depends on MFD_88PM860X=y help This driver supports 88PM8607 voltage regulator chips. config REGULATOR_ACT8865 tristate "Active-semi act8865 voltage regulator" depends on I2C depends on POWER_SUPPLY select REGMAP_I2C help This driver controls a active-semi act8865 voltage output regulator via I2C bus. config REGULATOR_ACT8945A tristate "Active-semi ACT8945A voltage regulator" depends on MFD_ACT8945A help This driver controls a active-semi ACT8945A voltage regulator via I2C bus. The ACT8945A features three step-down DC/DC converters and four low-dropout linear regulators, along with a ActivePath battery charger. config REGULATOR_AD5398 tristate "Analog Devices AD5398/AD5821 regulators" depends on I2C help This driver supports AD5398 and AD5821 current regulator chips. If building into module, its name is ad5398.ko. config REGULATOR_ANATOP tristate "Freescale i.MX on-chip ANATOP LDO regulators" depends on ARCH_MXC || COMPILE_TEST depends on MFD_SYSCON help Say y here to support Freescale i.MX on-chip ANATOP LDOs regulators. It is recommended that this option be enabled on i.MX6 platform. config REGULATOR_AAT2870 tristate "AnalogicTech AAT2870 Regulators" depends on MFD_AAT2870_CORE help If you have a AnalogicTech AAT2870 say Y to enable the regulator driver. config REGULATOR_AB8500 bool "ST-Ericsson AB8500 Power Regulators" depends on AB8500_CORE help This driver supports the regulators found on the ST-Ericsson mixed signal AB8500 PMIC config REGULATOR_ARIZONA_LDO1 tristate "Cirrus Madera and Wolfson Arizona class devices LDO1" depends on MFD_ARIZONA || MFD_MADERA depends on SND_SOC help Support for the LDO1 regulators found on Cirrus Logic Madera codecs and Wolfson Microelectronic Arizona codecs. config REGULATOR_ARIZONA_MICSUPP tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP" depends on MFD_ARIZONA || MFD_MADERA depends on SND_SOC help Support for the MICSUPP regulators found on Cirrus Logic Madera codecs and Wolfson Microelectronic Arizona codecs devices. config REGULATOR_ARM_SCMI tristate "SCMI based regulator driver" depends on ARM_SCMI_PROTOCOL && OF help This adds the regulator driver support for ARM platforms using SCMI protocol for device voltage management. This driver uses SCMI Message Protocol driver to interact with the firmware providing the device Voltage functionality. config REGULATOR_AS3711 tristate "AS3711 PMIC" depends on MFD_AS3711 help This driver provides support for the voltage regulators on the AS3711 PMIC config REGULATOR_AS3722 tristate "AMS AS3722 PMIC Regulators" depends on MFD_AS3722 help This driver provides support for the voltage regulators on the AS3722 PMIC. This will enable support for all the software controllable DCDC/LDO regulators. config REGULATOR_ATC260X tristate "Actions Semi ATC260x PMIC Regulators" depends on MFD_ATC260X help This driver provides support for the voltage regulators on the ATC260x PMICs. This will enable support for all the software controllable DCDC/LDO regulators. config REGULATOR_AXP20X tristate "X-POWERS AXP20X PMIC Regulators" depends on MFD_AXP20X help This driver provides support for the voltage regulators on the AXP20X PMIC. config REGULATOR_BCM590XX tristate "Broadcom BCM590xx PMU Regulators" depends on MFD_BCM590XX help This driver provides support for the voltage regulators on the BCM590xx PMUs. This will enable support for the software controllable LDO/Switching regulators. config REGULATOR_BD71815 tristate "ROHM BD71815 Power Regulator" depends on MFD_ROHM_BD71828 select REGULATOR_ROHM help This driver supports voltage regulators on ROHM BD71815 PMIC. This will enable support for the software controllable buck and LDO regulators and a current regulator for LEDs. This driver can also be built as a module. If so, the module will be called bd71815-regulator. config REGULATOR_BD71828 tristate "ROHM BD71828 Power Regulator" depends on MFD_ROHM_BD71828 select REGULATOR_ROHM help This driver supports voltage regulators on ROHM BD71828 PMIC. This will enable support for the software controllable buck and LDO regulators. This driver can also be built as a module. If so, the module will be called bd71828-regulator. config REGULATOR_BD718XX tristate "ROHM BD71837 Power Regulator" depends on MFD_ROHM_BD718XX select REGULATOR_ROHM help This driver supports voltage regulators on ROHM BD71837 PMIC. This will enable support for the software controllable buck and LDO regulators. This driver can also be built as a module. If so, the module will be called bd718x7-regulator. config REGULATOR_BD9571MWV tristate "ROHM BD9571MWV Regulators" depends on MFD_BD9571MWV help This driver provides support for the voltage regulators on the ROHM BD9571MWV PMIC. This will enable support for the software controllable regulator and voltage sampling units. This driver can also be built as a module. If so, the module will be called bd9571mwv-regulator. config REGULATOR_BD957XMUF tristate "ROHM BD9576MUF and BD9573MUF Regulators" depends on MFD_ROHM_BD957XMUF help This driver supports voltage regulators on ROHM BD9576MUF and BD9573MUF PMICs. This driver can also be built as a module. If so, the module will be called bd9576-regulator. config REGULATOR_CPCAP tristate "Motorola CPCAP regulator" depends on MFD_CPCAP help Say y here for CPCAP regulator found on some Motorola phones and tablets such as Droid 4. config REGULATOR_CROS_EC tristate "ChromeOS EC regulators" depends on CROS_EC && OF help This driver supports voltage regulators that is connected to ChromeOS EC and controlled through EC host commands. This driver can also be built as a module. If so, the module will be called cros-ec-regulator. config REGULATOR_DA903X tristate "Dialog Semiconductor DA9030/DA9034 regulators" depends on PMIC_DA903X depends on !CC_IS_CLANG # https://bugs.llvm.org/show_bug.cgi?id=38789 help Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9030/DA9034 PMIC. config REGULATOR_DA9052 tristate "Dialog Semiconductor DA9052/DA9053 regulators" depends on PMIC_DA9052 help This driver supports the voltage regulators of DA9052-BC and DA9053-AA/Bx PMIC. config REGULATOR_DA9055 tristate "Dialog Semiconductor DA9055 regulators" depends on MFD_DA9055 help Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9055 PMIC. This driver can also be built as a module. If so, the module will be called da9055-regulator. config REGULATOR_DA9062 tristate "Dialog Semiconductor DA9061/62 regulators" depends on MFD_DA9062 help Say y here to support the BUCKs and LDOs regulators found on DA9061 and DA9062 PMICs. This driver can also be built as a module. If so, the module will be called da9062-regulator. config REGULATOR_DA9063 tristate "Dialog Semiconductor DA9063 regulators" depends on MFD_DA9063 && OF help Say y here to support the BUCKs and LDOs regulators found on DA9063 PMICs. This driver can also be built as a module. If so, the module will be called da9063-regulator. config REGULATOR_DA9121 tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator" depends on I2C && OF select REGMAP_I2C help Say y here to support for the Dialog Semiconductor DA9121. The DA9121 is a single channel dual-phase buck converter controlled through an I2C interface. DA9121 Single-channel dual-phase 10A buck converter DA9130 Single-channel dual-phase 10A buck converter (Automotive) DA9217 Single-channel dual-phase 6A buck converter DA9122 Dual-channel single-phase 5A buck converter DA9131 Dual-channel single-phase 5A buck converter (Automotive) DA9220 Dual-channel single-phase 3A buck converter DA9132 Dual-channel single-phase 3A buck converter (Automotive) This driver can also be built as a module. If so, the module will be called da9121-regulator. config REGULATOR_DA9210 tristate "Dialog Semiconductor DA9210 regulator" depends on I2C select REGMAP_I2C help Say y here to support for the Dialog Semiconductor DA9210. The DA9210 is a multi-phase synchronous step down converter 12A DC-DC Buck controlled through an I2C interface. config REGULATOR_DA9211 tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator" depends on I2C select REGMAP_I2C help Say y here to support for the Dialog Semiconductor DA9211/DA9212 /DA9213/DA9214/DA9215. The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous step down converter 12A or 16A DC-DC Buck controlled through an I2C interface. config REGULATOR_DBX500_PRCMU bool config REGULATOR_DB8500_PRCMU bool "ST-Ericsson DB8500 Voltage Domain Regulators" depends on MFD_DB8500_PRCMU select REGULATOR_DBX500_PRCMU help This driver supports the voltage domain regulators controlled by the DB8500 PRCMU config REGULATOR_FAN53555 tristate "Fairchild FAN53555 Regulator" depends on I2C select REGMAP_I2C help This driver supports Fairchild FAN53555 Digitally Programmable TinyBuck Regulator. The FAN53555 is a step-down switching voltage regulator that delivers a digitally programmable output from an input voltage supply of 2.5V to 5.5V. The output voltage is programmed through an I2C interface. config REGULATOR_FAN53880 tristate "Fairchild FAN53880 Regulator" depends on I2C && (OF || COMPILE_TEST) select REGMAP_I2C help This driver supports Fairchild (ON Semiconductor) FAN53880 regulator. The regulator is a programmable power management IC (PMIC), it is controlled by I2C and provides one BUCK, one BOOST and four LDO outputs. config REGULATOR_GPIO tristate "GPIO regulator support" depends on GPIOLIB || COMPILE_TEST help This driver provides support for regulators that can be controlled via gpios. It is capable of supporting current and voltage regulators and the platform has to provide a mapping of GPIO-states to target volts/amps. config REGULATOR_HI6421 tristate "HiSilicon Hi6421 PMIC voltage regulator support" depends on MFD_HI6421_PMIC && OF help This driver provides support for the voltage regulators on the HiSilicon Hi6421 PMU / Codec IC. Hi6421 is a multi-function device which, on regulator part, provides 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All of them come with support to either ECO (idle) or sleep mode. config REGULATOR_HI6421V530 tristate "HiSilicon Hi6421v530 PMIC voltage regulator support" depends on MFD_HI6421_PMIC && OF help This driver provides support for the voltage regulators on HiSilicon Hi6421v530 PMU / Codec IC. Hi6421v530 is a multi-function device which, on regulator part, provides 5 general purpose LDOs, and all of them come with support to either ECO (idle) or sleep mode. config REGULATOR_HI655X tristate "Hisilicon HI655X PMIC regulators support" depends on ARCH_HISI || COMPILE_TEST depends on MFD_HI655X_PMIC && OF help This driver provides support for the voltage regulators of the Hisilicon Hi655x PMIC device. config REGULATOR_HI6421V600 tristate "HiSilicon Hi6421v600 PMIC voltage regulator support" depends on MFD_HI6421_SPMI && OF select REGMAP help This driver provides support for the voltage regulators on HiSilicon Hi6421v600 PMU / Codec IC. This is used on Kirin 3670 boards, like HiKey 970. config REGULATOR_ISL9305 tristate "Intersil ISL9305 regulator" depends on I2C select REGMAP_I2C help This driver supports ISL9305 voltage regulator chip. config REGULATOR_ISL6271A tristate "Intersil ISL6271A Power regulator" depends on I2C help This driver supports ISL6271A voltage regulator chip. config REGULATOR_LM363X tristate "TI LM363X voltage regulators" depends on MFD_TI_LMU help This driver supports LM3631, LM3632 and LM36274 voltage regulators for the LCD bias. One boost output voltage is configurable and always on. Other LDOs are used for the display module. config REGULATOR_LOCHNAGAR tristate "Cirrus Logic Lochnagar regulator driver" depends on MFD_LOCHNAGAR help This enables regulator support on the Cirrus Logic Lochnagar audio development board. config REGULATOR_LP3971 tristate "National Semiconductors LP3971 PMIC regulator driver" depends on I2C help Say Y here to support the voltage regulators and convertors on National Semiconductors LP3971 PMIC config REGULATOR_LP3972 tristate "National Semiconductors LP3972 PMIC regulator driver" depends on I2C help Say Y here to support the voltage regulators and convertors on National Semiconductors LP3972 PMIC config REGULATOR_LP872X tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" depends on I2C select REGMAP_I2C help This driver supports LP8720/LP8725 PMIC config REGULATOR_LP873X tristate "TI LP873X Power regulators" depends on MFD_TI_LP873X && OF help This driver supports LP873X voltage regulator chips. LP873X provides two step-down converters and two general-purpose LDO voltage regulators. It supports software based voltage control for different voltage domains config REGULATOR_LP8755 tristate "TI LP8755 High Performance PMU driver" depends on I2C select REGMAP_I2C help This driver supports LP8755 High Performance PMU driver. This chip contains six step-down DC/DC converters which can support 9 mode multiphase configuration. config REGULATOR_LP87565 tristate "TI LP87565 Power regulators" depends on MFD_TI_LP87565 && OF help This driver supports LP87565 voltage regulator chips. LP87565 provides four step-down converters. It supports software based voltage control for different voltage domains config REGULATOR_LP8788 tristate "TI LP8788 Power Regulators" depends on MFD_LP8788 help This driver supports LP8788 voltage regulator chip. config REGULATOR_LTC3589 tristate "LTC3589 8-output voltage regulator" depends on I2C select REGMAP_I2C help This enables support for the LTC3589, LTC3589-1, and LTC3589-2 8-output regulators controlled via I2C. config REGULATOR_LTC3676 tristate "LTC3676 8-output voltage regulator" depends on I2C select REGMAP_I2C help This enables support for the LTC3676 8-output regulators controlled via I2C. config REGULATOR_MAX14577 tristate "Maxim 14577/77836 regulator" depends on MFD_MAX14577 help This driver controls a Maxim MAX14577/77836 regulator via I2C bus. The MAX14577 regulators include safeout LDO and charger current regulator. The MAX77836 has two additional LDOs. config REGULATOR_MAX1586 tristate "Maxim 1586/1587 voltage regulator" depends on I2C help This driver controls a Maxim 1586 or 1587 voltage output regulator via I2C bus. The provided regulator is suitable for PXA27x chips to control VCC_CORE and VCC_USIM voltages. config REGULATOR_MAX77620 tristate "Maxim 77620/MAX20024 voltage regulator" depends on MFD_MAX77620 || COMPILE_TEST help This driver controls Maxim MAX77620 voltage output regulator via I2C bus. The provided regulator is suitable for Tegra chip to control Step-Down DC-DC and LDOs. Say Y here to enable the regulator driver. config REGULATOR_MAX77650 tristate "Maxim MAX77650/77651 regulator support" depends on MFD_MAX77650 || COMPILE_TEST help Regulator driver for MAX77650/77651 PMIC from Maxim Semiconductor. This device has a SIMO with three independent power rails and an LDO. config REGULATOR_MAX8649 tristate "Maxim 8649 voltage regulator" depends on I2C select REGMAP_I2C help This driver controls a Maxim 8649 voltage output regulator via I2C bus. config REGULATOR_MAX8660 tristate "Maxim 8660/8661 voltage regulator" depends on I2C help This driver controls a Maxim 8660/8661 voltage output regulator via I2C bus. config REGULATOR_MAX8893 tristate "Maxim 8893 voltage regulator" depends on I2C select REGMAP_I2C help This driver controls a Maxim 8893 voltage output regulator via I2C bus. config REGULATOR_MAX8907 tristate "Maxim 8907 voltage regulator" depends on MFD_MAX8907 || COMPILE_TEST help This driver controls a Maxim 8907 voltage output regulator via I2C bus. The provided regulator is suitable for Tegra chip to control Step-Down DC-DC and LDOs. config REGULATOR_MAX8925 tristate "Maxim MAX8925 Power Management IC" depends on MFD_MAX8925 help Say y here to support the voltage regulator of Maxim MAX8925 PMIC. config REGULATOR_MAX8952 tristate "Maxim MAX8952 Power Management IC" depends on I2C help This driver controls a Maxim 8952 voltage output regulator via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS modes ranging from 0.77V to 1.40V by 0.01V steps. config REGULATOR_MAX8973 tristate "Maxim MAX8973 voltage regulator " depends on I2C depends on THERMAL && THERMAL_OF select REGMAP_I2C help The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down switching regulator delivers up to 9A of output current. Each phase operates at a 2MHz fixed frequency with a 120 deg shift from the adjacent phase, allowing the use of small magnetic component. config REGULATOR_MAX8997 tristate "Maxim 8997/8966 regulator" depends on MFD_MAX8997 help This driver controls a Maxim 8997/8966 regulator via I2C bus. The provided regulator is suitable for S5PC110, S5PV210, and Exynos-4 chips to control VCC_CORE and VCC_USIM voltages. config REGULATOR_MAX8998 tristate "Maxim 8998 voltage regulator" depends on MFD_MAX8998 help This driver controls a Maxim 8998 voltage output regulator via I2C bus. The provided regulator is suitable for S3C6410 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. config REGULATOR_MAX77686 tristate "Maxim 77686 regulator" depends on MFD_MAX77686 || COMPILE_TEST help This driver controls a Maxim 77686 regulator via I2C bus. The provided regulator is suitable for Exynos-4 chips to control VARM and VINT voltages. config REGULATOR_MAX77693 tristate "Maxim 77693/77843 regulator" depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST help This driver controls a Maxim 77693/77843 regulators via I2C bus. The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' and one current regulator 'CHARGER'. This is suitable for Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips. config REGULATOR_MAX77802 tristate "Maxim 77802 regulator" depends on MFD_MAX77686 || COMPILE_TEST help This driver controls a Maxim 77802 regulator via I2C bus. The provided regulator is suitable for Exynos5420/Exynos5800 SoCs to control various voltages. It includes support for control of voltage and ramp speed. config REGULATOR_MAX77826 tristate "Maxim 77826 regulator" depends on I2C select REGMAP_I2C help This driver controls a Maxim 77826 regulator via I2C bus. The regulator include 15 LDOs, BUCK and BUCK BOOST regulator. It includes support for control of output voltage. This regulator is found on the Samsung Galaxy S5 (klte) smartphone. config REGULATOR_MC13XXX_CORE tristate config REGULATOR_MC13783 tristate "Freescale MC13783 regulator driver" depends on MFD_MC13XXX select REGULATOR_MC13XXX_CORE help Say y here to support the regulators found on the Freescale MC13783 PMIC. config REGULATOR_MC13892 tristate "Freescale MC13892 regulator driver" depends on MFD_MC13XXX select REGULATOR_MC13XXX_CORE help Say y here to support the regulators found on the Freescale MC13892 PMIC. config REGULATOR_MCP16502 tristate "Microchip MCP16502 PMIC" depends on I2C && OF select REGMAP_I2C help Say y here to support the MCP16502 PMIC. This driver supports basic operations (get/set voltage, get/set operating mode) through the regulator interface. In addition it enables suspend-to-ram/standby transition. config REGULATOR_MP5416 tristate "Monolithic MP5416 PMIC" depends on I2C && OF select REGMAP_I2C help Say y here to support the MP5416 PMIC. This will enable supports the software controllable 4 buck and 4 LDO regulators. Say M here if you want to include support for the regulator as a module. config REGULATOR_MP8859 tristate "MPS MP8859 regulator driver" depends on I2C select REGMAP_I2C help Say y here to support the MP8859 voltage regulator. This driver supports basic operations (get/set voltage) through the regulator interface. Say M here if you want to include support for the regulator as a module. The module will be named "mp8859". config REGULATOR_MP886X tristate "MPS MP8869 regulator driver" depends on I2C && (OF || COMPILE_TEST) select REGMAP_I2C help This driver supports the MP8869 voltage regulator. config REGULATOR_MPQ7920 tristate "Monolithic MPQ7920 PMIC" depends on I2C && OF select REGMAP_I2C help Say y here to support the MPQ7920 PMIC. This will enable supports the software controllable 4 buck and 5 LDO regulators. This driver supports the control of different power rails of device through regulator interface. config REGULATOR_MT6311 tristate "MediaTek MT6311 PMIC" depends on I2C select REGMAP_I2C help Say y here to select this option to enable the power regulator of MediaTek MT6311 PMIC. This driver supports the control of different power rails of device through regulator interface. config REGULATOR_MT6315 tristate "MediaTek MT6315 PMIC" depends on SPMI select REGMAP_SPMI help Say y here to select this option to enable the power regulator of MediaTek MT6315 PMIC. This driver supports the control of different power rails of device through regulator interface. config REGULATOR_MT6323 tristate "MediaTek MT6323 PMIC" depends on MFD_MT6397 help Say y here to select this option to enable the power regulator of MediaTek MT6323 PMIC. This driver supports the control of different power rails of device through regulator interface. config REGULATOR_MT6358 tristate "MediaTek MT6358 PMIC" depends on MFD_MT6397 help Say y here to select this option to enable the power regulator of MediaTek MT6358 PMIC. This driver supports the control of different power rails of device through regulator interface. config REGULATOR_MT6359 tristate "MediaTek MT6359 PMIC" depends on MFD_MT6397 help Say y here to select this option to enable the power regulator of MediaTek MT6359 PMIC. This driver supports the control of different power rails of device through regulator interface. config REGULATOR_MT6360 tristate "MT6360 SubPMIC Regulator" depends on MFD_MT6360 help Say Y here to enable MT6360 regulator support. This is support MT6360 PMIC/LDO part include 2-channel buck with Thermal Shutdown and Overload Protection 6-channel High PSRR and Low Dropout LDO. config REGULATOR_MT6380 tristate "MediaTek MT6380 PMIC" depends on MTK_PMIC_WRAP help Say y here to select this option to enable the power regulator of MediaTek MT6380 PMIC. This driver supports the control of different power rails of device through regulator interface. config REGULATOR_MT6397 tristate "MediaTek MT6397 PMIC" depends on MFD_MT6397 help Say y here to select this option to enable the power regulator of MediaTek MT6397 PMIC. This driver supports the control of different power rails of device through regulator interface. config REGULATOR_MTK_DVFSRC tristate "MediaTek DVFSRC regulator driver" depends on MTK_DVFSRC help Say y here to control regulator by DVFSRC (dynamic voltage and frequency scaling resource collector). This driver supports to control regulators via the DVFSRC of Mediatek. It allows for voting on regulator state between multiple users. config REGULATOR_PALMAS tristate "TI Palmas PMIC Regulators" depends on MFD_PALMAS help If you wish to control the regulators on the Palmas series of chips say Y here. This will enable support for all the software controllable SMPS/LDO regulators. The regulators available on Palmas series chips vary depending on the muxing. This is handled automatically in the driver by reading the mux info from OTP. config REGULATOR_PBIAS tristate "PBIAS OMAP regulator driver" depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON help Say y here to support pbias regulator for mmc1:SD card i/o on OMAP SoCs. This driver provides support for OMAP pbias modelled regulators. config REGULATOR_PCA9450 tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver" depends on I2C select REGMAP_I2C help Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC regulator driver. config REGULATOR_PCAP tristate "Motorola PCAP2 regulator driver" depends on EZX_PCAP help This driver provides support for the voltage regulators of the PCAP2 PMIC. config REGULATOR_PCF50633 tristate "NXP PCF50633 regulator driver" depends on MFD_PCF50633 help Say Y here to support the voltage regulators and converters on PCF50633 config REGULATOR_PF8X00 tristate "NXP PF8100/PF8121A/PF8200 regulator driver" depends on I2C && OF select REGMAP_I2C help Say y here to support the regulators found on the NXP PF8100/PF8121A/PF8200 PMIC. Say M here if you want to support for the regulators found on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named "pf8x00-regulator". config REGULATOR_PFUZE100 tristate "Freescale PFUZE100/200/3000/3001 regulator driver" depends on I2C && OF select REGMAP_I2C help Say y here to support the regulators found on the Freescale PFUZE100/200/3000/3001 PMIC. config REGULATOR_PV88060 tristate "Powerventure Semiconductor PV88060 regulator" depends on I2C select REGMAP_I2C help Say y here to support the voltage regulators and convertors PV88060 config REGULATOR_PV88080 tristate "Powerventure Semiconductor PV88080 regulator" depends on I2C select REGMAP_I2C help Say y here to support the buck convertors on PV88080 config REGULATOR_PV88090 tristate "Powerventure Semiconductor PV88090 regulator" depends on I2C select REGMAP_I2C help Say y here to support the voltage regulators and convertors on PV88090 config REGULATOR_PWM tristate "PWM voltage regulator" depends on PWM help This driver supports PWM controlled voltage regulators. PWM duty cycle can increase or decrease the voltage. config REGULATOR_QCOM_RPM tristate "Qualcomm RPM regulator driver" depends on MFD_QCOM_RPM help If you say yes to this option, support will be included for the regulators exposed by the Resource Power Manager found in Qualcomm 8660, 8960 and 8064 based devices. Say M here if you want to include support for the regulators on the Qualcomm RPM as a module. The module will be named "qcom_rpm-regulator". config REGULATOR_QCOM_RPMH tristate "Qualcomm Technologies, Inc. RPMh regulator driver" depends on QCOM_RPMH || (QCOM_RPMH=n && COMPILE_TEST) depends on QCOM_COMMAND_DB || (QCOM_COMMAND_DB=n && COMPILE_TEST) help This driver supports control of PMIC regulators via the RPMh hardware block found on Qualcomm Technologies Inc. SoCs. RPMh regulator control allows for voting on regulator state between multiple processors within the SoC. config REGULATOR_QCOM_SMD_RPM tristate "Qualcomm SMD based RPM regulator driver" depends on QCOM_SMD_RPM help If you say yes to this option, support will be included for the regulators exposed by the Resource Power Manager found in Qualcomm 8974 based devices. Say M here if you want to include support for the regulators on the Qualcomm RPM as a module. The module will be named "qcom_smd-regulator". config REGULATOR_QCOM_SPMI tristate "Qualcomm SPMI regulator driver" depends on SPMI || COMPILE_TEST help If you say yes to this option, support will be included for the regulators found in Qualcomm SPMI PMICs. Say M here if you want to include support for the regulators on the Qualcomm SPMI PMICs as a module. The module will be named "qcom_spmi-regulator". config REGULATOR_QCOM_USB_VBUS tristate "Qualcomm USB Vbus regulator driver" depends on SPMI || COMPILE_TEST help If you say yes to this option, support will be included for the regulator used to enable the VBUS output. Say M here if you want to include support for enabling the VBUS output as a module. The module will be named "qcom_usb_vbus_regulator". config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator" depends on BACKLIGHT_CLASS_DEVICE depends on I2C select REGMAP_I2C help This driver supports ATTINY regulator on the Raspberry Pi 7-inch touchscreen unit. The regulator is used to enable power to the TC358762, display and to control backlight. config REGULATOR_RC5T583 tristate "RICOH RC5T583 Power regulators" depends on MFD_RC5T583 help Select this option to enable the power regulator of RICOH PMIC RC5T583. This driver supports the control of different power rails of device through regulator interface. The device supports multiple DCDC/LDO outputs which can be controlled by i2c communication. config REGULATOR_RK808 tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators" depends on MFD_RK808 help Select this option to enable the power regulator of ROCKCHIP PMIC RK805,RK809&RK817,RK808 and RK818. This driver supports the control of different power rails of device through regulator interface. The device supports multiple DCDC/LDO outputs which can be controlled by i2c communication. config REGULATOR_RN5T618 tristate "Ricoh RN5T567/618 voltage regulators" depends on MFD_RN5T618 help Say y here to support the regulators found on Ricoh RN5T567, RN5T618 or RC5T619 PMIC. config REGULATOR_ROHM tristate config REGULATOR_RT4801 tristate "Richtek RT4801 Regulators" depends on I2C select REGMAP_I2C help This adds support for voltage regulators in Richtek RT4801 Display Bias IC. The device supports two regulators (DSVP/DSVN). config REGULATOR_RT4831 tristate "Richtek RT4831 DSV Regulators" depends on MFD_RT4831 help This adds support for voltage regulators in Richtek RT4831. There are three regulators (VLCM/DSVP/DSVN). VLCM is a virtual voltage input for DSVP/DSVN inside IC. And DSVP/DSVN is the real Vout range from 4V to 6.5V. It's common used to provide the power for the display panel. config REGULATOR_RT5033 tristate "Richtek RT5033 Regulators" depends on MFD_RT5033 help This adds support for voltage and current regulators in Richtek RT5033 PMIC. The device supports multiple regulators like current source, LDO and Buck. config REGULATOR_RT6160 tristate "Richtek RT6160 BuckBoost voltage regulator" depends on I2C select REGMAP_I2C help This adds support for voltage regulator in Richtek RT6160. This device automatically change voltage output mode from Buck or Boost. The mode transition depend on the input source voltage. The wide output range is from 2025mV to 5200mV and can be used on most common application scenario. config REGULATOR_RT6245 tristate "Richtek RT6245 voltage regulator" depends on I2C select REGMAP_I2C help This adds support for Richtek RT6245 voltage regulator. It can support up to 14A output current and adjustable output voltage from 0.4375V to 1.3875V, per step 12.5mV. config REGULATOR_RTQ2134 tristate "Richtek RTQ2134 SubPMIC Regulator" depends on I2C select REGMAP_I2C help This driver adds support for RTQ2134 SubPMIC regulators. The RTQ2134 is a multi-phase, programmable power management IC that integrate with four high efficient, synchronous step-down converter cores. It features wide output voltage range and the capability to configure the corresponding power stages. config REGULATOR_RTMV20 tristate "Richtek RTMV20 Laser Diode Regulator" depends on I2C select REGMAP_I2C help This driver adds support for the load switch current regulator on the Richtek RTMV20. It can support the load current up to 6A and integrate strobe/vsync/fsin signal to synchronize the IR camera. config REGULATOR_RTQ6752 tristate "Richtek RTQ6752 TFT LCD voltage regulator" depends on I2C select REGMAP_I2C help This driver adds support for Richtek RTQ6752. RTQ6752 includes two synchronous boost converters for PAVDD, and one synchronous NAVDD buck-boost. This device is suitable for automotive TFT-LCD panel. config REGULATOR_S2MPA01 tristate "Samsung S2MPA01 voltage regulator" depends on MFD_SEC_CORE || COMPILE_TEST help This driver controls Samsung S2MPA01 voltage output regulator via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. config REGULATOR_S2MPS11 tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator" depends on MFD_SEC_CORE || COMPILE_TEST help This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage output regulator via I2C bus. The chip is comprised of high efficient Buck converters including Dual-Phase Buck converter, Buck-Boost converter, various LDOs. config REGULATOR_S5M8767 tristate "Samsung S5M8767A voltage regulator" depends on MFD_SEC_CORE || COMPILE_TEST help This driver supports a Samsung S5M8767A voltage output regulator via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and supports DVS mode with 8bits of output voltage control. config REGULATOR_SC2731 tristate "Spreadtrum SC2731 power regulator driver" depends on MFD_SC27XX_PMIC || COMPILE_TEST help This driver provides support for the voltage regulators on the SC2731 PMIC. config REGULATOR_SKY81452 tristate "Skyworks Solutions SKY81452 voltage regulator" depends on MFD_SKY81452 help This driver supports Skyworks SKY81452 voltage output regulator via I2C bus. SKY81452 has one voltage linear regulator can be programmed from 4.5V to 20V. This driver can also be built as a module. If so, the module will be called sky81452-regulator. config REGULATOR_SLG51000 tristate "Dialog Semiconductor SLG51000 regulators" depends on I2C select REGMAP_I2C help Say y here to support for the Dialog Semiconductor SLG51000. The SLG51000 is seven compact and customizable low dropout regulators. config REGULATOR_STM32_BOOSTER tristate "STMicroelectronics STM32 BOOSTER" depends on ARCH_STM32 || COMPILE_TEST help This driver supports internal booster (3V3) embedded in some STMicroelectronics STM32 chips. It can be used to supply ADC analog input switches when vdda supply is below 2.7V. This driver can also be built as a module. If so, the module will be called stm32-booster. config REGULATOR_STM32_VREFBUF tristate "STMicroelectronics STM32 VREFBUF" depends on ARCH_STM32 || COMPILE_TEST help This driver supports STMicroelectronics STM32 VREFBUF (voltage reference buffer) which can be used as voltage reference for internal ADCs, DACs and also for external components through dedicated Vref+ pin. This driver can also be built as a module. If so, the module will be called stm32-vrefbuf. config REGULATOR_STM32_PWR bool "STMicroelectronics STM32 PWR" depends on ARCH_STM32 || COMPILE_TEST help This driver supports internal regulators (1V1, 1V8, 3V3) in the STMicroelectronics STM32 chips. config REGULATOR_STPMIC1 tristate "STMicroelectronics STPMIC1 PMIC Regulators" depends on MFD_STPMIC1 help This driver supports STMicroelectronics STPMIC1 PMIC voltage regulators and switches. The STPMIC1 regulators supply power to an application processor as well as to external system peripherals such as DDR, Flash memories and system devices. To compile this driver as a module, choose M here: the module will be called stpmic1_regulator. config REGULATOR_TI_ABB tristate "TI Adaptive Body Bias on-chip LDO" depends on ARCH_OMAP help Select this option to support Texas Instruments' on-chip Adaptive Body Bias (ABB) LDO regulators. It is recommended that this option be enabled on required TI SoC. Certain Operating Performance Points on TI SoCs may be unstable without enabling this as it provides device specific optimized bias to allow/optimize functionality. config REGULATOR_STW481X_VMMC bool "ST Microelectronics STW481X VMMC regulator" depends on MFD_STW481X || COMPILE_TEST default y if MFD_STW481X help This driver supports the internal VMMC regulator in the STw481x PMIC chips. config REGULATOR_SY7636A tristate "Silergy SY7636A voltage regulator" depends on MFD_SY7636A help This driver supports Silergy SY3686A voltage regulator. config REGULATOR_SY8106A tristate "Silergy SY8106A regulator" depends on I2C && (OF || COMPILE_TEST) select REGMAP_I2C help This driver supports SY8106A single output regulator. config REGULATOR_SY8824X tristate "Silergy SY8824C/SY8824E regulator" depends on I2C && (OF || COMPILE_TEST) select REGMAP_I2C help This driver supports SY8824C single output regulator. config REGULATOR_SY8827N tristate "Silergy SY8827N regulator" depends on I2C && (OF || COMPILE_TEST) select REGMAP_I2C help This driver supports SY8827N single output regulator. config REGULATOR_TPS51632 tristate "TI TPS51632 Power Regulator" depends on I2C select REGMAP_I2C help This driver supports TPS51632 voltage regulator chip. The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller with Serial VID control and DVFS. The voltage output can be configure through I2C interface or PWM interface. config REGULATOR_TPS6105X tristate "TI TPS6105X Power regulators" depends on TPS6105X default y if TPS6105X help This driver supports TPS61050/TPS61052 voltage regulator chips. It is a single boost converter primarily for white LEDs and audio amplifiers. config REGULATOR_TPS62360 tristate "TI TPS6236x Power Regulator" depends on I2C select REGMAP_I2C help This driver supports TPS6236x voltage regulator chip. This regulator is meant for processor core supply. This chip is high-frequency synchronous step down dc-dc converter optimized for battery-powered portable applications. config REGULATOR_TPS65023 tristate "TI TPS65023 Power regulators" depends on I2C select REGMAP_I2C help This driver supports TPS65023 voltage regulator chips. TPS65023 provides three step-down converters and two general-purpose LDO voltage regulators. It supports TI's software based Class-2 SmartReflex implementation. config REGULATOR_TPS6507X tristate "TI TPS6507X Power regulators" depends on I2C help This driver supports TPS6507X voltage regulator chips. TPS6507X provides three step-down converters and two general-purpose LDO voltage regulators. It supports TI's software based Class-2 SmartReflex implementation. config REGULATOR_TPS65086 tristate "TI TPS65086 Power regulators" depends on MFD_TPS65086 help This driver provides support for the voltage regulators on TI TPS65086 PMICs. config REGULATOR_TPS65090 tristate "TI TPS65090 Power regulator" depends on MFD_TPS65090 help This driver provides support for the voltage regulators on the TI TPS65090 PMIC. config REGULATOR_TPS65132 tristate "TI TPS65132 Dual Output Power regulators" depends on I2C && GPIOLIB select REGMAP_I2C help This driver supports TPS65132 single inductor - dual output power supply specifically designed for display panels. config REGULATOR_TPS65217 tristate "TI TPS65217 Power regulators" depends on MFD_TPS65217 help This driver supports TPS65217 voltage regulator chips. TPS65217 provides three step-down converters and four general-purpose LDO voltage regulators. It supports software based voltage control for different voltage domains config REGULATOR_TPS65218 tristate "TI TPS65218 Power regulators" depends on MFD_TPS65218 && OF help This driver supports TPS65218 voltage regulator chips. TPS65218 provides six step-down converters and one general-purpose LDO voltage regulators. It supports software based voltage control for different voltage domains config REGULATOR_TPS6524X tristate "TI TPS6524X Power regulators" depends on SPI help This driver supports TPS6524X voltage regulator chips. TPS6524X provides three step-down converters and two general-purpose LDO voltage regulators. This device is interfaced using a customized serial interface currently supported on the sequencer serial port controller. config REGULATOR_TPS6586X tristate "TI TPS6586X Power regulators" depends on MFD_TPS6586X help This driver supports TPS6586X voltage regulator chips. config REGULATOR_TPS65910 tristate "TI TPS65910/TPS65911 Power Regulators" depends on MFD_TPS65910 help This driver supports TPS65910/TPS65911 voltage regulator chips. config REGULATOR_TPS65912 tristate "TI TPS65912 Power regulator" depends on MFD_TPS65912 help This driver supports TPS65912 voltage regulator chip. config REGULATOR_TPS80031 tristate "TI TPS80031/TPS80032 power regulator driver" depends on MFD_TPS80031 help TPS80031/ TPS80032 Fully Integrated Power Management with Power Path and Battery Charger. It has 5 configurable step-down converters, 11 general purpose LDOs, VBUS generator and digital output to control regulators. config REGULATOR_TWL4030 tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" depends on TWL4030_CORE help This driver supports the voltage regulators provided by this family of companion chips. config REGULATOR_UNIPHIER tristate "UniPhier regulator driver" depends on ARCH_UNIPHIER || COMPILE_TEST depends on OF select REGMAP_MMIO default ARCH_UNIPHIER help Support for regulators implemented on Socionext UniPhier SoCs. config REGULATOR_VCTRL tristate "Voltage controlled regulators" depends on OF help This driver provides support for voltage regulators whose output voltage is controlled by the voltage of another regulator. config REGULATOR_VEXPRESS tristate "Versatile Express regulators" depends on VEXPRESS_CONFIG help This driver provides support for voltage regulators available on the ARM Ltd's Versatile Express platform. config REGULATOR_VQMMC_IPQ4019 tristate "IPQ4019 VQMMC SD LDO regulator support" depends on ARCH_QCOM help This driver provides support for the VQMMC LDO I/0 voltage regulator of the IPQ4019 SD/EMMC controller. config REGULATOR_WM831X tristate "Wolfson Microelectronics WM831x PMIC regulators" depends on MFD_WM831X help Support the voltage and current regulators of the WM831x series of PMIC devices. config REGULATOR_WM8350 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" depends on MFD_WM8350 help This driver provides support for the voltage and current regulators of the WM8350 AudioPlus PMIC. config REGULATOR_WM8400 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" depends on MFD_WM8400 help This driver provides support for the voltage regulators of the WM8400 AudioPlus PMIC. config REGULATOR_WM8994 tristate "Wolfson Microelectronics WM8994 CODEC" depends on MFD_WM8994 help This driver provides support for the voltage regulators on the WM8994 CODEC. config REGULATOR_QCOM_LABIBB tristate "QCOM LAB/IBB regulator support" depends on SPMI || COMPILE_TEST help This driver supports Qualcomm's LAB/IBB regulators present on the Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI based PMIC implementations. LAB can be used as positive boost regulator and IBB can be used as a negative boost regulator for LCD display panel. endif
Save
cmd:
run