/
usr
/
src
/
linux-headers-5.15.0-190
/
drivers
/
usb
/
musb
/
/usr/src/linux-headers-5.15.0-190/drivers/usb/musb
mkdir
upload
Name
Size
Mode
Actions
Kconfig
4528
0644
edit
dl
rm
Makefile
1469
0644
edit
dl
rm
Edit:
/usr/src/linux-headers-5.15.0-190/drivers/usb/musb/Makefile
(1469B)
# SPDX-License-Identifier: GPL-2.0 # # for USB OTG silicon based on Mentor Graphics INVENTRA designs # # define_trace.h needs to know how to find our header CFLAGS_musb_trace.o := -I$(src) obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o musb_hdrc-y := musb_core.o musb_trace.o musb_hdrc-$(CONFIG_USB_MUSB_HOST)$(CONFIG_USB_MUSB_DUAL_ROLE) += musb_virthub.o musb_host.o musb_hdrc-$(CONFIG_USB_MUSB_GADGET)$(CONFIG_USB_MUSB_DUAL_ROLE) += musb_gadget_ep0.o musb_gadget.o musb_hdrc-$(CONFIG_DEBUG_FS) += musb_debugfs.o # Hardware Glue Layer obj-$(CONFIG_USB_MUSB_OMAP2PLUS) += omap2430.o obj-$(CONFIG_USB_MUSB_AM35X) += am35x.o obj-$(CONFIG_USB_MUSB_DSPS) += musb_dsps.o obj-$(CONFIG_USB_MUSB_TUSB6010) += tusb6010.o obj-$(CONFIG_USB_MUSB_DAVINCI) += davinci.o obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o obj-$(CONFIG_USB_MUSB_UX500) += ux500.o obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o obj-$(CONFIG_USB_MUSB_MEDIATEK) += mediatek.o # the kconfig must guarantee that only one of the # possible I/O schemes will be enabled at a time ... # PIO only, or DMA (several potential schemes). # though PIO is always there to back up DMA, and for ep0 musb_hdrc-$(CONFIG_USB_INVENTRA_DMA) += musbhsdma.o musb_hdrc-$(CONFIG_USB_TI_CPPI_DMA) += cppi_dma.o musb_hdrc-$(CONFIG_USB_TUSB_OMAP_DMA) += tusb6010_omap.o musb_hdrc-$(CONFIG_USB_UX500_DMA) += ux500_dma.o musb_hdrc-$(CONFIG_USB_TI_CPPI41_DMA) += musb_cppi41.o
Save
cmd:
run